Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 22 for “"Advanced Reactor Designs"”.

  1. Optimizing a SiC-based nuclear instrumentation system for molten salt reactors

    … obvious candidate for nuclear instrumentation in advanced reactor designs. To effectively put this technology into practice, a detection system will be evaluated against several parameters to ensure an adequate signal is available and detector performance is maintained over a desired lifetime. …

    gatech Repository record for Optimizing a SiC-based nuclear instrumentation system for molten salt reactors (opens in a new tab)

  2. Exploring the Performance and Applications of a Novel Refueling and Waste Management Strategy in LEU- and Thorium-fueled Molten Salt Reactors

    <p>Interest in advanced, Generation IV nuclear reactors for commercial electricity production has increased in recent years as the U.S. and many nations around the world seek to transition to clean, carbon-free electricity generation. In particular, liquid-fueled Molten Salt Reactors (MSRs) were …

    utk-theses Repository record for Exploring the Performance and Applications of a Novel Refueling and Waste Management Strategy in LEU- and Thorium-fueled Molten Salt Reactors (opens in a new tab)

  3. A novel core analysis method for prismatic high temperature gas reactors

    … to close the fluid model. Models for reactor containment cooling (RCCS) heat transfer and decay heat generation have also been added. Using the method developed here, both the pressurized (P-LOFC) and de-pressurized (D-LOFC) accident have been simulated. Results from these analyses …

    gatech Repository record for A novel core analysis method for prismatic high temperature gas reactors (opens in a new tab)

  4. Validation & Sensitivity Study of a 1d Multiphysics Model for Graphite Moderated Molten Salt Reactor (MSRE) Using Gen-Foam

    The Molten Salt Reactor (MSR) is one of multiple advanced reactor designs that has received increased attention due to its enhanced safety features, reduced waste production, and increased non-proliferation capabilities. However, further research is necessary to fully prepare for large-scale …

    tamu Repository record for Validation & Sensitivity Study of a 1d Multiphysics Model for Graphite Moderated Molten Salt Reactor (MSRE) Using Gen-Foam (opens in a new tab)

  5. Analysis of Neutron Environments in Advanced Reactors Vs. Triga Reactor for In-Core Behavior Studies

    The Fluoride High-Temperature Reactor (FHR) and the Very High-Temperature Reactor (VHTR) are advanced reactor designs in the generation IV class. Advanced reactors operate in more strenuous conditions than older generation II designs which can be detrimental to data collecting equipment; therefore, …

    tamu Repository record for Analysis of Neutron Environments in Advanced Reactors Vs. Triga Reactor for In-Core Behavior Studies (opens in a new tab)

  6. Modeling and Simulations of Natural Convection Technologies for Advanced Reactor Applications

    As advanced reactors are looking to rely on natural convection technologies, modeling and simulations of these systems is crucial to design, analyses, and optimization. System codes have been the primary tool for design and safety analysis of reactor technologies. While legacy system codes such …

    tamu Repository record for Modeling and Simulations of Natural Convection Technologies for Advanced Reactor Applications (opens in a new tab) Embargoed until 2027-05-01

  7. COMPARING THE RISK OF THE PRESSURE TUBE-SCWR TO THE CANDU USING PROBABILISTIC RISK ASSESSMENT TOOLS

    … worldwide is expected to launch a set of reactors with advanced reactor designs. Generation-IV (GEN-IV) reactors are to display superior safety by incorporating additional passive safety concepts as well as improving accident management and minimization of consequences. Canada is in the …

    mcmaster Repository record for COMPARING THE RISK OF THE PRESSURE TUBE-SCWR TO THE CANDU USING PROBABILISTIC RISK ASSESSMENT TOOLS (opens in a new tab)

  8. Development of a New Criticality Safety Benchmark with HEU Metal and Thick Graphite Reflectors to Support Advanced Reactor Development

    … model larger applications like nuclear reactors; continuous improvement of nuclear data and subsequent lowering of uncertainty on commercial power reactor designs are two ways to support the development of new nuclear in the United States.</p> <p>Today, performing critical experiments …

    ut-knoxville Repository record for Development of a New Criticality Safety Benchmark with HEU Metal and Thick Graphite Reflectors to Support Advanced Reactor Development (opens in a new tab)

  9. PRODUCTION AND ADSORPTION OF VOLATILE TELLURIUM HEXAFLUORIDE

    … reprocessing technology. With the advent of advanced reactor designs off-gas streams arising from advanced reprocessing methodology, such as that of FV [fluoride volatility] processing, also merit consideration. This work focuses on TeF<sub>6 </sub>[tellurium hexafluoride], one of the most …

    utk-theses Repository record for PRODUCTION AND ADSORPTION OF VOLATILE TELLURIUM HEXAFLUORIDE (opens in a new tab)

  10. Dynamic Insight into Radiation-Induced Defect Accommodation in Pure Metals and Refractory Alloys

    … materials to extend the life of existing nuclear reactors and enable advanced reactor designs. In nuclear environments, structural materials inevitably accumulate irradiation-induced defects, leading to degradation and eventual failure. Two promising damage mitigation strategies include (i) …

    jhu Repository record for Dynamic Insight into Radiation-Induced Defect Accommodation in Pure Metals and Refractory Alloys (opens in a new tab) Embargoed until 2026-12-01

  11. Modeling and Simulation of a Prototypical Advanced Reactor

    … The lack of operating experience with proposed advanced reactor designs limits our ability to estimate the probability of failure (POF) of key components. Incorporation of unit-specific estimates of POF into dynamic probabilistic risk assessment (PRA) has the potential to enable real-time …

    ut-knoxville Repository record for Modeling and Simulation of a Prototypical Advanced Reactor (opens in a new tab)

  12. Parametric Analysis of Fuel Performance in the MSR Design Domain

    Molten Salt Reactors (MSR) are emerging as one of the fastest developing advanced reactor designs in United States. Flexibility in MSR fuels offers unique opportunities in both performance and applications, as well as unique challenges. This thesis offers an evaluation of fuel salt mixtures in a …

    tamu Repository record for Parametric Analysis of Fuel Performance in the MSR Design Domain (opens in a new tab)

  13. Experimental Investigations of Flow Behavior Inside the Upper Plenum of TAMU Air-Cooled Reactor Cavity Cooling System

    One of the candidates for advanced reactor designs identified for the Next Generation Nuclear Plant (NGNP) is the Very High Temperature Reactor (VHTR). The Reactor Cavity Cooling System (RCCS) is a promising passive decay heat removal system for the VHTR to ensure reliability of the transfer of the …

    tamu Repository record for Experimental Investigations of Flow Behavior Inside the Upper Plenum of TAMU Air-Cooled Reactor Cavity Cooling System (opens in a new tab)

  14. Investigation of Solution Verification and Validation of Nuclear Thermal Hydraulics Computational Fluid Dynamics Using Twin Rectangular Turbulent Jets

    The research and development of advanced nuclear reactors requires complementary experimental and computational approaches. These approaches are used in such a manner that experimental campaigns help validate computational tools. These computational tools are then utilized for similar scenarios …

    tamu Repository record for Investigation of Solution Verification and Validation of Nuclear Thermal Hydraulics Computational Fluid Dynamics Using Twin Rectangular Turbulent Jets (opens in a new tab)

  15. Modeling and Design Optimization of Thermal Hydraulic Systems for Advanced Reactor Applications

    … presents the thermal–hydraulic phenomena within advanced reactor applications for design and modeling. It is organized into three main sections, each tackling distinct yet interconnected aspects of thermal–hydraulic applications in advanced nuclear reactors. In the second main section of this …

    tamu Repository record for Modeling and Design Optimization of Thermal Hydraulic Systems for Advanced Reactor Applications (opens in a new tab)

  16. Detection and Materials Advances for Next-Generation Nuclear Systems

    … breakthrough has significant implications for advanced reactor designs, direct energy conversion, and space propulsion systems such as Fission Fragment Rocket Engines (FFREs). Finally, a precise methodology was developed to measure trace tritium contamination in deuterium (D2) and hydrogen …

    ttu Repository record for Detection and Materials Advances for Next-Generation Nuclear Systems (opens in a new tab)

  17. Barium Fluoride (BaF2) Scintillation Detectors for Fast Timing Measurements in Pebble-Bed Reactor Design

    … used for fast measurement of deep burn fuel in advanced reactor designs. Pebble bed high-temperature gas-cooled reactors (HTGRs) have a multi-pass system of spherical fuel element circulation. Typically, the spherical fuel elements can be restricted from 55-hours to 100-hours of cooling time …

    tamu Repository record for Barium Fluoride (BaF2) Scintillation Detectors for Fast Timing Measurements in Pebble-Bed Reactor Design (opens in a new tab)

  18. Development and Validation of a Cross Correlation Function Based Indirect Flow Measurement Technique

    … the accurate measurement of mass flow rates. Advanced flow meters have been invented and widely applied in several current industries; however, the operation environment in nuclear power plants is especially harsh due to high temperature, high radiation and extremely corrosive conditions.. …

    utk-theses Repository record for Development and Validation of a Cross Correlation Function Based Indirect Flow Measurement Technique (opens in a new tab)

  19. Cyber-resilience of machine learning-based digital twins for reactor autonomous control systems

    … modeling. However, the implementation of ACS in advanced reactor controls must be assessed for its resilience against adversarial action, given the increasing incidence of cyber-attacks against critical infrastructure and OT environments. This thesis delves into the implementation techniques and …

    gatech Repository record for Cyber-resilience of machine learning-based digital twins for reactor autonomous control systems (opens in a new tab)

  20. An Intelligent Fault Detection and Diagnosis Monitoring System for Reactor Operational Resilience

    Various advanced reactor designs proposed in recent years envision deployment scenarios which feature reactor operations with significantly reduced staffing or even completely autonomous frameworks to reduce the operations and management costs of the plants or facilitate power production in remote …

    tamu Repository record for An Intelligent Fault Detection and Diagnosis Monitoring System for Reactor Operational Resilience (opens in a new tab)

Page 1 of 2