Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 38 for “"Advanced control methods"”.

  1. Advanced control methods on three-phase inverters in distributed energy resources

    … is an endeavor to apply new and well-established control methodologies to improve transient response, stability and reliability of three-phase inverters in grid-connected and isolated mode of operation. In the course of studying the effect of these methodologies, model-based control is introduced …

    must-thes Repository record for Advanced control methods on three-phase inverters in distributed energy resources (opens in a new tab)

  2. Grid-formIng Inverters: comprehensIve revIew, desIgn, and ImplementatIon of advanced control methods

    … low Short Circuit Ratios (SCRs). Numerous GFM control methods have been proposed in the literature, each addressing specific research gaps, however, several open research topics remain. This work explores some of these research areas and proposes potential solutions to address the existing …

    ucf Repository record for Grid-formIng Inverters: comprehensIve revIew, desIgn, and ImplementatIon of advanced control methods (opens in a new tab)

  3. Design and application of advanced control methods to gas turbines and networked systems

    … deals with the design and application of modern control techniques to a Rolls Royce aircraft gas turbine engine and networked systems. It is motivated by the need to fully exploit recent advances in control engineering and investigate the suitability of various control methods to gas turbine …

    southwales Repository record for Design and application of advanced control methods to gas turbines and networked systems (opens in a new tab) Download PDF for Design and application of advanced control methods to gas turbines and networked systems (opens in a new tab)

  4. Augmentation and Hybridization of Conventional Forms of Process Control with Advanced Control Methods

    Within the last decade in the field of process control, there has developed a distinct gap between the technological advancements of today and the well-established theory that has preceded it. This is most evident where the novel developments and structures often outpace the necessary guarantees …

    wvu Repository record for Augmentation and Hybridization of Conventional Forms of Process Control with Advanced Control Methods (opens in a new tab)

  5. Advanced Control Methods for Torque Ripple Reduction and Performance Improvement in Switched Reluctance Motor Drives

    In this thesis, advanced control methods are presented for torque ripple reduction and performance improvement in switched reluctance motor (SRM) drives. Firstly, a comparative evaluation of power electronic converters including asymmetric, N+1, C dump, split AC, and split DC converters is …

    mcmaster Repository record for Advanced Control Methods for Torque Ripple Reduction and Performance Improvement in Switched Reluctance Motor Drives (opens in a new tab)

  6. Advanced controls of power electronic modules for PV-based plug-n-play Dc microgrids and Dc-Ac grids interface

    … adding new components. This thesis studies advanced control methods for power electronic converters to achieve real PnP feature in dc microgrid systems and furtherly converting it to the utility ac grid. The proposed methods have considered specific application criteria of each power …

    manitoba Repository record for Advanced controls of power electronic modules for PV-based plug-n-play Dc microgrids and Dc-Ac grids interface (opens in a new tab)

  7. INTEGRATION OF ROBOTIC AND ELECTRO-PNEUMATIC SYSTEMS USING ADVANCED CONTROL AND COMMUNICATION SCHEMES

    … a flexible and reconfigurable system through advanced communication protocols and perform a process to demonstrate the effectiveness of interconnected systems. The system consists of three six-axis robots, one electro-pneumatic robot, and two conveyors connected using EthernetIP communication …

    mtu Repository record for INTEGRATION OF ROBOTIC AND ELECTRO-PNEUMATIC SYSTEMS USING ADVANCED CONTROL AND COMMUNICATION SCHEMES (opens in a new tab)

  8. Optimization and control of a dual-loop EGR system in a modern diesel engine

    … the intelligent optimization algorithm and advanced control methods of the diesel engine's air path have been proposed in this work. In addition, the simulation platform and the HIL test platform are established for research activities on engine optimization and control. In this thesis, it …

    birmingham Download PDF for Optimization and control of a dual-loop EGR system in a modern diesel engine (opens in a new tab)

  9. Adaptive filter techniques for optical beam jitter control and target tracking

    The objective of this research is to develop advanced control methods to attenuate laser beam jitter using a fast-steering mirror. Adaptive filter controllers using Filtered-X Least Mean Square (FX-LMS) and Filtered-X Recursive Least Square (FX-RLS) algorithms are explored. The disturbances that …

    nps Repository record for Adaptive filter techniques for optical beam jitter control and target tracking (opens in a new tab)

  10. Trajectory-based real-time traffic signal control using advanced sensor data

    … the potential performance of traffic signal control. Advanced control algorithms often make use of estimated vehicle arrival times but such data is challenging to estimate with existing detector data. Connected vehicles (CVs) are able to provide such data directly but it is unlikely that all …

    iastate Repository record for Trajectory-based real-time traffic signal control using advanced sensor data (opens in a new tab)

  11. Non-Linear Modeling of Hysteresis in Piezoelectric Actuated Cantilever Beam Using the Bouc-Wen Model

    … models. The presence of hysteresis complicates control systems involving piezoelectric actuators. However, traditional modeling methods for piezoelectric actuated smart structures often treat the piezoelectric patches as linear actuators without considering hysteresis, leading to suboptimal …

    calpoly Repository record for Non-Linear Modeling of Hysteresis in Piezoelectric Actuated Cantilever Beam Using the Bouc-Wen Model (opens in a new tab)

  12. Regulatory Compliance Standards and Power System Reliability: A Study on Inverter-Based Resources

    … proposed by Murty [31] and augmented with advanced control methods such as Linear Quadratic Regulator (LQR) control from Mackey and McCann [32] and further refined in the context of IBR damping by Alsarray and McCann [33], we explore three configurations of a three-area load frequency …

    arkansas Repository record for Regulatory Compliance Standards and Power System Reliability: A Study on Inverter-Based Resources (opens in a new tab)

  13. GALLIUM NITRIDE BASED ONBOARD CHARGER FOR ELECTRIC VEHICLES

    … solutions, innovative circuit topologies, and advanced control methods to enable MHz switching frequencies without sacrificing efficiency. However, the advantage of higher switching speed is gained at the expense of higher switching losses in both the semiconductors and the magnetics. …

    maryland Repository record for GALLIUM NITRIDE BASED ONBOARD CHARGER FOR ELECTRIC VEHICLES (opens in a new tab)

  14. Development of a 2-Mode AWD E-REV powertrain and real-time optimization-based control system

    … placed significant emphasis on development of advanced control methods geared towards efficient energy management. Real-time optimization-based methods represent the current state-of-the-art in terms of hybrid vehicle control and energy management. This thesis summarizes the development of an …

    uvic Repository record for Development of a 2-Mode AWD E-REV powertrain and real-time optimization-based control system (opens in a new tab)

  15. Building thermal load control: Potential, Strategy, and Implementation

    … conditions for occupants. In recent years, advanced control methods, such as model predictive control (MPC), are being studied to lower building energy cost (e.g., by deferring consumption to low rate hours of the day) while still satisfying comfort requirements to an acceptable degree. Two …

    gatech Repository record for Building thermal load control: Potential, Strategy, and Implementation (opens in a new tab)

  16. Design, Analysis and Control of Multi-port Converter for PV and Storage Applications

    … have been designed and analyzed along with advanced control methods for solar battery integration. An LLC converter-based design has been developed to efficiently convert and regulate energy from solar panels and battery storage. This converter is designed to have multiple ports to enable …

    ucf Repository record for Design, Analysis and Control of Multi-port Converter for PV and Storage Applications (opens in a new tab)

  17. Field oriented control of permanent magnet synchronous motor with third-harmonic injection pulse width modulation to reduce quadrotors’ speed ripples

    … of autonomy as enabled by the use and precise control of motors. Traditional Direct Current (DC) motors are replaced by permanent magnet synchronous motors (PMSM) associated with the new power electronic inverters. Because of a PMSM’s higher power density than a DC motor, it reduces the rotor …

    njit Repository record for Field oriented control of permanent magnet synchronous motor with third-harmonic injection pulse width modulation to reduce quadrotors’ speed ripples (opens in a new tab)

  18. Advanced control techniques for doubly fed induction generator-based wind turbine converters to improve low voltage ride-through during system imbalances

    … disturbances. Conventional dq axis current control using voltage source converters for both the grid side and the rotor side of the DFIG are analyzed and simulated. DFIG operation is investigated under balanced and unbalanced system disturbances. A conventional d-axis and q-axis control …

    must-thes Repository record for Advanced control techniques for doubly fed induction generator-based wind turbine converters to improve low voltage ride-through during system imbalances (opens in a new tab)

  19. Motion design for high speed machines.

    … motion profile to be followed and the feedback control method used. To improve this performance the manipulator trajectory requires planning at an advanced level and an efficient control method has to be used. The purpose of this study is to investigate high-level trajectory planning and …

    liverpool-jm Repository record for Motion design for high speed machines. (opens in a new tab) Download PDF for Motion design for high speed machines. (opens in a new tab)

Page 1 of 2