Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 40 for “"Advancing front"”.
-
Airfoil streamline tracking for advancing front meshing in two dimensions
… and in the boundary layer region. We use an advancing front mesh generator that incorporates streamline location data to generate a mesh that concentrates vertices in the same locations favored by adjoint-based adaptive schemes. Streamline data is collected from inviscid solutions and is used …
-
Parallelization of the Advancing Front Local Reconnection Mesh Generation Software Using a Pseudo-Constrained Parallel Data Refinement Method
… strength sequential mesh generator, called Advancing Front Local Reconnection (AFLR), are presented. AFLR has been under development for the last 25 years at the NSF/ERC center at Mississippi State University. The parallel procedure that is presented is called Pseudo-constrained (PsC) …
-
Análise adaptativa por regeneração da malha
… plane elasticity and plate bending problems. The advancing front technique is employed for mesh generation. A linear triangular finite element is used and a-posteriori error estimator is based on projections and smoothing tecniques. Several problems are analysed and results compared with the …
-
Experimental Evaluation and Simulations of Fiber Orientation in Injection Molding of Polymers Containing Short Glass Fibers
… core layer, and microtextural description of the advancing front are included in this dissertation. The analysis and assessment of the radial evolution of fiber orientation and advancing front based on comparing the experimental data with simulation results are under ongoing investigation.
-
The numerical modelling of steep waves interacting with structures
… generators have been developed, one based on the advancing front method, the other on the Voronoi technique. Variations of each method are examined. Both methods give good quality meshes. The advancing front technique is found to be faster, but the Voronoi method is more robust and reliable.</p> …
-
Quantifying Spatiotemporal Patterns in the Expansion of Twitching Bacterial Colonies
… as a function of agar concentration C. The advancing front consists of finger-like protrusions of bacteria, with cells in the expanding colony arranged in a lattice-like pattern. We find that the average finger width increases linearly with C, whereas the average finger speed is independent …
-
The impact of mesh regularity on errors
… the error performance. In this study, Engwirda’s frontal-Delaunay scheme and Marcum’s advancing front local reconnection scheme are described along with the conventional Delaunay triangulation. They are shown to improve the mesh regularity effectively. Even though several numerical test cases show …
-
An Adaptive Remeshing Finite Element Method for High-Speed Compressible Flows Using Quadrilateral and Triangular Elements
… on an old mesh to create a new mesh based on an advancing front technique. In the present implementation, a structured mesh of quadrilaterals is created in the boundary layer and an unstructured mesh consisting of quadrilaterals and triangles is created in the inviscid region. Studies of …
-
Error estimation and adaptive refinement technique in the method of moments
… on the domains to be refined and employs the advancing front Delaunay algorithm to generate refined meshes. Since the quality of refined meshes can be aggravated during this procedure, we adopt Laplacian smoothing, which adjusts node positions by taking the average of their adjacent node …
-
Verification of a two-dimensional infiltration model for the resin transfer molding process
… flow rate conditions. The second, denoted the advancing front method, determines the permeability of a dry preform to an infiltrating fluid. Water, corn oil, and an epoxy resin, Epon 815, were used to determine the effect of fluid type and viscosity on the steady state permeability behavior of …
-
Critical phenomena in creep and damage
… peel-in-nip geometry, under a constant force, advancing front exhibits creep-depinning phase transition. Numerical models suggest that it corresponds the motion of an elastic line with a long-range elastic interaction. The probability distributions of the event energies, waiting times between …
-
Adaptive unstructured spacetime meshing for four-dimensional spacetime discontinuous Galerkin finite element methods
We describe the spacetime discontinuous Galerkin method, a new type of finite-element method which promises dramatic improvement in solution speed for hyperbolic problems. These methods require the generation of spacetime meshes that satisfy a special causality constraint. This work focuses on the …
-
Beech bark disease in Michigan : distribution, impacts and dynamics
… monitoring indicates the rate of spread of the advancing front (beech scale infestation) from 2005 to 2012, varies among Lower Michigan populations, ranging from <1 km to 14.3 km per year. Spread rates are more consistent in Upper Michigan, ranging from 3 to 11 km per year.In 2002, 62 long term …
-
Interfaces in disordered media. Scaling growth, avalanche dynamics, and microfluidic fronts
… all the physical forces that play a role at the advancing front, such as the random capillarity of the medium, the surface tension of the interface or the viscous pressure, induce the roughness of the front to show a rich variety of scaling regimes, with the unavoidable presence of crossover …
-
High order resolution and parallel implementation on unstructured grids
… given. The unstructured mesh is generated by the advancing front technique. A cell-centred upwind finite volume method has been adopted to discretize the Euler equations. Both explicit and point implicit time stepping algorithms are derived. The flux calculation using Roe's and Osher's approximate …
-
High-Order Static and Dynamic Tetrahedral Mesh Generation Algorithms for Use in Finite Element Modeling and Simulation
… and tetrahedral mesh generation method using an advancing front technique. Most other existing mesh generation techniques require computer-aided design (CAD) files to represent the geometric boundary, which is often unavailable for patient-specific biomedical applications. Our method requires …
-
Verification of a three-dimensional resin transfer molding process simulation model
… and compaction models. The steady-state and advancing front permeability measurement methods are compared. The results indicate that both methods yield similar permeabilities for a plain weave, bi-axial fiberglass fabric. Also, a method to determine principal directions and permeabilities is …
-
Improved Prediction of Glass Fiber Orientation in Basic Injection Molding Geometries
… disk injection molding geometry including the advancing front and simulating the sprue and gate region (SGM method) so that no assumption about fiber orientation at the mold entrance has to be made. Using a semi-flexible fiber model and orientation parameters obtained through rheology, …
-
High resolution algorithms for the Navier Stokes equations for generalized descretizations
… the unstructured grids were generated using an advancing front mesh generation procedure. Modifications to the three dimensional grid generator were necessary to discretize the surface grids for bodies with high curvature. In addition, mesh refinement algorithms were implemented to improve the …
-
Short-Term Moisture Diffusion in Superabsorbent Polymer-Modified Cementitious Composites
… on the pore saturation level. Spatially, the IRH front (≥95% IRH) rose differently from the near-surface region onward rather than tracking together. This separation became clearest along the advancing IRH front (≥85% IRH) which penetrated deeper in the control than in the SAP specimen (~51 vs ~43 …
Page 1 of 2