Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 200 for “"Aeronautical Vehicles"”.
-
Development of technologies for low-cost oceanographic unmanned aeronautical vehicles
… measurements at a high sample rate. An Unmanned Aeronautical Vehicle (UAV) could bridge this gap.<br/>This research has provided a mission-ready autopilot and ground station for future oceanographic application by the National Oceanography Centre, Southampton. A sea landing is the only available …
-
Aeronautical life-cycle mission modelling framework for conceptual design
… life cycle mission modelling during conceptual aeronautical design. The framework supports object-oriented mission definition using Geographical Information System technology. Design concepts are defined generically, enabling simulation of most aeronautical vessels and many non-aeronautical …
-
MOLECULAR DYNAMICS MODELING OF POLYMERS FOR AEROSPACE COMPOSITES
… used as structural materials in aerospace and aeronautical vehicles. Resin/reinforcement wetting and the effect of polymerization on the thermo-mechanical properties of the resin are key parameters in the manufacturing of aerospace composite materials. Determining the contact angle between …
-
Advances in Aero-Propulsive Modeling for Fixed-Wing and eVTOL Aircraft Using Experimental Data
… (eVTOL) aircraft have recently emerged as vehicles able to perform new missions and stimulate future air transportation methods. This dissertation presents several system identification research advancements for these modern aircraft configurations enabling accurate mathematical model …
-
Τρισδιάστατη αποτύπωση δασογενούς περιβάλλοντος με χρήση σαρωτή laser και μη επανδρωμένου αεροναυτικού οχήματος
… such sensors can be aerial (manned or unmanned aeronautical vehicles) or terrestrial, separated into static and mobile. Motive of this dissertation was the research of Terrestrial Laser Scanners use in Greek forests of the Mediterranean and Upper Mediterranean zone. Their use has been tested in …
-
Flow Approximations for Solid Rocket Motors with Tapered Walls
Internal flowfield modeling is a requisite for obtaining critical parameters for the design and fabrication of modern solid rocket motors. In this work, the analytical formulation of internal flowfields particular to solid rocket motors with tapered sidewalls is pursued. The analysis employs the …
-
Evaluation Of Multicarrier Air Interfaces In The Presence Of Interference For L-Band And C-Band Air-Ground Communications
The use of aeronautical vehicles and systems is continuously growing, and this means current aeronautical communication systems, particularly those operating in the very high frequency (VHF) aviation band, will suffer from severe congestion in some regions of the world. For example, it is estimated …
-
Behavioral Motivation of Prospective Mars’ Crewmembers
<p>Living in extreme climatic conditions is challenging on planet Earth which encourages researchers hoping to find life on other planets such as Mars. This research was conducted to explore the effects on human behavior and willingness to go to Mars when individuals were informed about all the …
-
Effect of Adaptive Tabs on Drag of a Square-Base Bluff Body
This thesis involves the experimental wind tunnel testing of a 0.127m by 0.127m square-base bluff body to test the effectiveness of trailing edge tabulations to reduce drag in the Cal Poly 0.912m by 1.219 m low-speed wind tunnel. To accomplish this, the boundary layer was first measured on the …
-
State of the Art of Piloted Electric Airplanes, NASA's Centennial Challenge Data and Fundamental Design Implications
The purpose of this study was to determine the current state of the electric airplane as primarily defined by results from NASA's Green Flight Challenge Competition. New equations must be derived in order to determine the endurance and range for electric airplanes since the standard equations …
-
Design and Control Considerations for a Skid-to-Turn Unmanned Aerial Vehicle
The use of Unmanned Aerial Vehicles (UAVs) are rapidly expanding and taking on new roles in the military. In the area of training and targeting vehicles, control systems are expanding the functionality of UAVs beyond their initially designed purpose. Aeromech Engineering’s NXT UAV is a high speed …
-
Development of a Small Unmanned Aerial Vehicle Longitudinal Model for Future Flutter Testing
This thesis presents the system identification of the longitudinal motion of a small unmanned aerial vehicle with flexible characteristics. The unmanned aerial vehicle of study is an off-the-shelf aircraft with limited knowledge about the dynamic model. The first task in obtaining a model for …
-
Design Advantages of Skin Friction Drag Reduction Using Riblets
The research reported here has examined the potential improvements in overall aircraft performance that can result from integrating skin friction reduction technology, such as riblets, early in the aircraft design cycle. This study has shown that riblets can improve the payload capacity, increase …
-
Active-Twist Rotor Blades Design, Analysis, and Testing
The subject of this thesis is the design, analysis, and experimental assessment of active-twist rotors. These active rotors use piezoelectric actuators embedded in the skins to twist the blade to reduce vibratory loads in the fixed system. First, the design and optimization of the twist response …
-
Interactive Approach for Geometry Definition with Automatically Differentiated Sensitivities for Practical Airplane Design
First, a newly developed interactive surface generation tool is described for the conceptual design phase and aerodynamic shape optimization of aircraft. The new design tool is called Interactive Rapid Airplane Parametric Input Design (IRAPID) for fuselage and wing body configurations, and Blended …
-
Robust Nonlinear Estimation and Control Applications using Synthetic Jet Actuators
… in flight control of small unmanned aerial vehicles (SUAVs), and could potentially lead to structural damage and catastrophic failures. LCO can be described as vibrational motions in the rocking, pitching and plunging displacements of an aircraft wing. To address this, the use of synthetic …
-
Aerodynamic Trade Study of Compound Helicopter Concepts
The relative performance attributes of compound helicopter concepts have been examined, including their potential for meeting the requirements of several challenging mission profiles. For each concept, which included lift and/or propulsive compounding, a suite of aerodynamic performance models was …
-
The Development of a Force Balance for Testing Micro Aerial Vehicles
… could produce meaningful data for micro aerial vehicles. Research was conducted to investigate the common balance configurations, and the strengths and weaknesses of each configuration were used to select the most appropriate design. The limitations of available fabrication facilities, the …
-
Preliminary Design of an Asteroid Hopping Mission
In 2010, NASA announced that its new vision is to support private space launch operations. It is anticipated that this new direction will create the need for new and innovative ideas that push the current boundaries of space exploration and contain the promise of substantial gain, both in research …
-
Battery Centric Serial Hybrid Aircraft Performance and Design Space
The design space and flight envelope of a battery centric serial hybrid aircraft has been analytically derived. The formulation assumes cruising flight only and all energy available is used. The flight envelope can be generated for any conventional propeller driven serial hybrid aircraft. The …
Page 1 of 10