Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 32 for “"Afterburner"”.
-
A method for aircraft afterburner combustion without flameholders
State of the art aircraft afterburners employ spray bars to inject fuel and flameholders to stabilize the combustion process. Such afterburner designs significantly increase the length (and thus weight), pressure losses, and observability of the engine. This thesis presents a feasibility study of a …
-
F/A-18E/F Catapult Minimum End Airspeed Testing
… at four gross weights, two in full non-afterburner thrust and two in full afterburner thrust.</p> <p>Results showed that the F/A-18E/F met the Specification for launch from the decks of existing U.S. Navy aircraft carriers. The non-afterburner launches above 58,000 pounds were limited by …
-
Design and testing of a combustor for a turbo-ramjet for UAV and missile applications
… was designed, developed, and tested as the afterburner for the turbo-ramjet engine. At subsonic speeds with the afterburner running, an increase in thrust of 40% was measured over the baseline turbojet running at 80% spool speed. A Computational Fluid Dynamics model of the flow through the …
-
A Parametric Analysis of a Turbofan Engine with an Auxiliary Bypass Combustion Chamber – The TurboAux Engine
… engine and its performance with and without an afterburner segment attached. Following that, the conventional turbofan and its mixing counterpart are studied, also with and without an afterburner segment. Then, a simple optimization analysis to identify optimal ‘fan’ pressure ratios for a series …
-
Analytics for Everyone
… i.e., a portable database, which we call Afterburner. Afterburner achieves comparable performance to native SQL engines given the same resources on modestly sized data sets. Afterburner uses code generation techniques that target an optimization-amenable subset of JavaScript and employs …
-
Gas flows and mixing in models of the Inco flash smelting furnace
… factor affecting the mixing in the uptake is the afterburner configuration. In the range applicable to the plant operation, Reynolds number and jet momentum were found to have little effect on the mixing in the uptake. The afterburner configuration which provided the best mixing conditions, had …
-
Aerothermodynamic analysis of a Coanda/Refraction jet engine test facility
… the testing of an E404 gas turbine engine with afterburner in operation. Computer generated aerothermodynamic field variables of pressure, velocity and temperature parameters were compared to operational field test data. Observations regarding compared results as well as system behavior are …
-
Improvement of the performance of a turbo-ramjet engine for UAV and missile applications
… at increased freejet Mach numbers. The engine's afterburner fuel system was redesigned to improve the vaporization and atomization of the fuel. The engine performed satisfactorily at speeds up to Mach 0.3, producing 100% more thrust over the baseline turbojet. The data acquisition system of the …
-
Analysis of Gas Turbine Test Cell #1 Lemoore Naval Air Station, California
… power run-up of a GE F404 gas turbine engine (afterburner in operation). The method in which PHOENICS arrives at a solution is discussed as well as how the code was applied to this problem. The solution of the problem is presented in tabular form and the results are discussed. Recommendations …
-
System and Component Analysis of a 1kW Diesel fuelled SOFC system
… heat exchanger network, desulphurizer and an afterburner. Modelled in VMGSimTM, inlet diesel gas is provided at the mass flow rate of 0.2596kg/hour, with the oxygen to carbon ratio calculated at 0.31 and the steam to carbon ratio arbitrarily set to be 2.25. The diesel fuel is preheated and …
-
Parametric study of the aerothermodynamics of a jet engine test facility
… (Phantom II) J-79-GE-8 gas turbine engine with afterburner. The PHOENICS generated pressure, velocity, and temperature fields of the test cell facility based on the k-epsilon turbulence model are compared with results generated by a model incorporating a temperature dependent kinematic turbulent …
-
Dependence of the Asymmetry Energy and Time in Dynamical Models Using Isoscaling
… GEMINI, a statistical decay model, used as an afterburner for the dynamical models. The dynamical models were studied at time-steps, or maximum times, of 300 fm/c and 3000 fm/c. In the AMD simulations, GEMINI was applied at 300 fm/c to de-excite the system. The fragment distributions and …
-
Charcoal in a Nutshell: Biocarbon Production from Cellulose, Norwegian Wood, Macadamia Nutshells and Sewage Sludge
… and to better monitor the self-designed thermal afterburner. Avicel cellulose carbonization experiments conducted under varying elevated pressures in the upgraded Wall-Heated Tubing Bomb Reactor produced, while showing evidence of a molten phase, high-quality solid pieces of charcoal. They …
-
Development of shrouded turbojet to form a turboramjet for future missile applications
Development of shroud to form part of an afterburner for a turbo- ramjet engine which has a possible application for high speed long range missile applications. Research has been conducted on scram-jet engines with little or no emphasis on a turbojet/ramjet combined cycle engines. With the …
-
Computational analysis of thermo-acoustic instabilities in combustion chambers and afterburners
… include annular combustion chamber and afterburner configurations, hence, apart from the effect of model parameters the effect of geometry on the overall stability of the system is considered in this article. The system's periodicity is leveraged using a recently developed root-of-unity …
-
Development of a water-cooled LDV probe for rocket/gas-turbine engine environments
… insertion of the water-cooled jacket into the afterburner or augmentor section of an air-breathing gas-turbine engine operating at 2000 K static temperature. The augmentor diameter was chosen to be 18 inches based on the existing General Electric J-85 jet engine augmentor. Different …
-
Flying qualities and performance of the F-16B airplane
… The FlOO-PW-200 engine has restricted afterburner (AB) operating envelope limitations and was a major deficiency. Loss of rudder authority, angle of attack (ADA) limitations and limited roll performance at high AGA were all major deficiencies designed into the flight control laws to …
-
The role of droplets in the autoignition of a polydisperse Jet-A spray in vitiated co-flow
… the interest of developing a flame-holder-less afterburner concept. In this system, liquid fuel is injected into a high temperature, flowing, vitiated air flow. Previous studies of fuel spray autoignition have suggested multiple mechanisms for a fuel spray to autoignite, including single droplet …
-
Energy Quantity Estimation in Radiated Acoustic Fields
… model for jet noise from an F-22 at military and afterburner engine conditions. An optimization is used to find the best-matching wavepacket model for measured intensity vectors. The results are compared to another intensity method of estimating the source region and source directivity, and the …
Page 1 of 2