Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 19 of 19 for “"Air Charge"”.
-
AIR CHARGE ESTIMATION FOR AN SI ENGINE USING IN-CYLINDER PRESSURE SENSOR
… and the composition of the combustion chamber charge is required for engine control strategies to meet stringent pollution emission and fuel consumption regulations. Estimation of fresh charge and residual gas masses is beneficial in terms of fuel efficiency, tailpipe emissions, engine …
-
Boost Pressure and EGR Rate Control of a Diesel Engine Air Charge System with eBoost Assistance
Thesis (Ph.D.)--Michigan State University. Mechanical Engineering - Doctor of Philosophy, 2024
-
Intake Port Isolation for Direct Injected Turbo Charged Gasoline Engines
… lower engine speeds, in a direct injection turbo charged gasoline engine. It has been known for a long period of time that heat transfer rate in flow components, such as intake system can have considerable effects on mass flow and consequently volumetric efficiency. There are several ways to …
-
IMPACT OF WATER INGESTION ON COMBUSTION PERFORMANCE IN A SPARK IGNITED INTERNAL COMBUSTION ENGINE
… performed on a 2.0L inline four cylinder turbocharged engine. Port water injection (with two different levels of atomization) was utilized to introduce water into the combustion system. Five speed / load points were tested from 1300 rpm 3 bar BMEP to 3250 rpm 15 bar BMEP. Testing was done with …
-
System Identification and State Estimation for Intake Manifold Charge Flow Temperature of a Compression Ignition Diesel Engine
<p>Intake manifold charge temperature is a factor used in mean value engine models (MVEMs) for the calculation of intake mass air charge and oxygen flow. More stringent emission requirements have led to increased deployment of more advanced engine combustion models onto production engine …
-
Observer Based Cylinder Charge Estimation for Spark-ignition Engines
… combustion engines require accurate cylinder charge estimation for determining engine torque, controlling air-to-fuel ratio (AFR), and ensuring high after-treatment efficiency. This is challenging due to the highly transient operating conditions that are common in automobile engines. The …
-
Performance Analysis of an Advanced Emission Reduction Technology Engine During Diesel-Hydrogen Dual Fuel Operation
… stream of hydrogen was infused into the intake air charge after the turbocharger. At 50% of rated load, the addition of hydrogen, at three different speeds (1300, 1800, and 2100 RPM), was examined. The hydrogen addition varied from 0-60% of input energy. The maximum amount of hydrogen added …
-
A QUANTITATIVE INVESTIGATION OF THE WATER CONDENSATION INSIDE TUBES OF COMPACT CHARGE AIR COOLER
… (OEMs) are increasing the number of turbocharged engines in their powertrain line-ups. The turbine-driven technology uses a forced induction device, which increases engine performance by increasing the density of the air charge being drawn into the cylinder. Denser air allows more fuel to …
-
Employing experimental and computational fluid dynamic methods to reduce methane emissions in large bore two-stroke natural gas engines by using in-cylinder techniques
… was the injection of a premixed natural gas and air charge into the pre-combustion chamber to improve homogeneity of the pre-combustion chamber. Using hydrogen as a fuel saw reductions in methane emissions of nearly 30%. The optimized prechamber design saw decreases between 22% and 31%, depending …
-
Diesel engine out exhaust temperature modelling- moving from a map based to physically based model approach
… which are directly or indirectly responsible for air charge control, emission regulation, torque control or are used as feedback to the engine control system. This makes the accurate prediction of the exhaust gas an important criterion for the control system. Automotive manufacturers use map based …
-
Numerical studies for charge formation in combustion engines
… the inherent cyclic variation in engines. Fuel-air charge combustibility is highly dependent on local in-cylinder metrics such as flow turbulence, mixture composition and temperature, for which experimental investigations are difficult. Thereby, it would be highly beneficial to develop fast and …
-
The Influence of Synthetic Gelatine on the Transient Loading and Response of Aluminium Panels Subjected to Blast Loading
… velocity were found to be the same for a free-air and a buried charge. Showing that a shallow buried charge produces a similar effect on the target plate as the equivalent free-air charge in far-field explosions. A simplified numerical simulation of blast-loaded hybrid gelatine/aluminium panels …
-
EVALUATION OF SENSORS AND STRATEGIES FOR CLOSED LOOP COMBUSTION CONTROL OF A GASOLINE SPARK-IGNITION TURBOCHARGED DIRECT INJECTION ENGINE
… fuel economy in the engine such as dilution of air charge can have a negative effect on combustion stability [2]. In a laboratory environment combustion stability is measured during steady state operation using cylinder pressure data typically using a 100 cycle moving window for averaging. …
-
Large Eddy Simulation of Turbulent Combustion in PPC and Diesel Engines
… the turbulent structures and the fuel and air mixing, and to provide high spatial and temporal resolution of the unsteady fluid motions and the reaction processes. Lagrangian particle tracking (LPT) method is used to model the fuel spray. Finite rate chemistry is employed with a …
-
Performance and emission characteristics of an automotive diesel engine using biodiesel fuel with the influence of air intake variables
The air induction system plays a major role by providing necessary air charge for combustion to take place in an engine cylinder. The pressure drop across the air intake manifold is known to have a significant effect on the indicated power of the internal combustion engine. Most car manufacturers …
-
Computational fluid dynamics studies on spray assisted combustion of alternative energy carriers
… in the combustion system. The premixed LRF-air charge is then ignited by a directly injected high reactivity fuel (HRF) such as diesel spray. Due to the adopted lean-burn concept of the premixed charge, LTC is attained with better fuel economy and cleaner emissions. Moreover, early …
-
An experimental and computational study of flow in the Squish Jet combustion chamber
Fast controlled burning of the fuel-air charge inside combustion chambers of spark ignition engines typically leads to reductions in specific fuel consumption and exhaust emissions. These advantages are especially useful in engines running on natural gas—a fuel with a relatively low flame speed. …
-
Physics-based Models for Engine System Studies: Quasi-D Dual-fuel Combustion and Real-time Intake Charge Flow Estimation
… an attractive alternative. NG is mixed with air in the intake system, and a relatively small amount of diesel fuel is injected directly into the cylinder to initiate combustion. In that case, the conversion from a conventional diesel engine requires little modification of engine hardware. …
-
MODEL-BASED ENGINE-OUT EMISSIONS ANALYSIS FOR A GASOLINE TURBOCHARGED DIRECT INJECTION SPARK-IGNITED ENGINE IN ELEVATED HEV CRANKING SPEED
The in-cylinder trapped air, residual gas, and temperature are important dynamic parameters in Gasoline Direct Injection (GDI) Spark Ignition (SI) engines for fuel and combustion control. However, their real-time prediction for transient engine operations is complicated, especially when concerning …