Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 163 for “"Air injection"”.
-
Air injection in a pseudo boiling system
… technique by macro-convection mechanism using an air injection system. Air injection through the heated wall is hypothesized to provide significant heat transfer enhancement like the convective component in pool boiling. The stirring action of bubbles is expected to provide heat transfer …
-
CONTROLLING STEAM FLOOD MIGRATION WITH AIR INJECTION WELLS
… flooding are generally low compared to steam injection rates and pressures, and have limited influence over the lateral growth of the steam zone. Steam can be controlled with air injection wells that limit steam migration away from the target, preventing mobilization of contamination outside …
-
AIR INJECTION AS A SCOUR COUNTERMEASURE AT BRIDGE PIERS
… aims to reduce the local scour by injecting air in order to reduce the effect of the scour-inducing downward roller flow pattern by harnessing the buoyancy of the injected air bubbles. A clear-water scour experimental study is conducted in a rectangular channel with a pier embedded in a sand …
-
Optimization of Air-injection Spargers for Column Flotation Applications
… in a pulp. To achieve this process separation an air sparging device, which is required to produce bubbles in the flotation cell is required. In column flotation operations, Sparger sparging devices are employed in column flotation operations to generate small bubbles into the cell with the aim to …
-
Experimental study of air injection process for enhanced oil recovery
As an enhanced oil recovery method, the air injection process (AIP) can improve the mobility of crude oil by the heat generated through crude oil oxidation. Generally speaking, the higher the crude oil temperature, the better the crude oil mobility. Therefore, the crude oil temperature is essential …
-
Air injection EOR and its application in shale oil reservoirs
… been applied in the shale oil reservoir, but the air injection method has not been used. Considering the availability of air and thermal effect caused by the oxidation reaction, the air injection could be a potential method for shale oil development. The main problem for air injection used in the …
-
Experimental and numerical study of air injection in light oil reservoirs
AIP (Air injection process) can offer unique economic and technical opportunities for enhanced oil recovery in light oil reservoirs. The complicated reaction mechanisms among crude oil, rock, and air make AIP different than conventional EOR (enhanced oil recovery) methods. Till now, the mechanisms …
-
A study of oxidation reaction kinetics during an air injection process.
Air injection is an enhanced oil recovery (EOR) process in which compressed air is injected into a high temperature, light-oil reservoir. The oxygen in injected air is intended to react with a fraction of reservoir oil at elevated temperature resulting in in-situ generation of flue gases and steam, …
-
Stilling Basin Scour Remediation Using Air Injection and Flat Plate Extension
… investigate the effectiveness of two-dimensional air diffusers and plate extensions (without air injection) on a 1/30 scale model of one of SFWMD gated spillway structures, the S65E gated spillway. A literature review examining the results of similar studies was conducted. The experimental design …
-
In Situ Combustion for Heavy Oil: Toe-to-Heel Air Injection
… greater efficiency and lower operating costs. Air injection based recovery processes offer potential for improved efficiency given that the heat is generated within the reservoir. However, industry has been reluctant to adopt air injection methods for oil sands reservoirs. In the research …
-
Minesweeping for pressure actuated mines by air injection into a water column
The U.S. Navy historically has not had an adequate means to remotely pressure-sweep for mines at reasonable speeds and cost, and this is still the case. The Navy has addressed such threats, but countermeasures are time consuming and considered to be very resource intensive. During this thesis two …
-
Ignition by air injection (CIBAI) for controlled auto-ignition in a CFR engine
Compression ignition by air injection (CIBAI) has been successfully achieved in a modified single cylinder, four-stroke, spark ignition cooperative fuel research (CFR) engine. The CIBAI cycle was invented by Professor John Loth and Professor Gary Morris, US patent No's: 6,994,057 Feb. 7, 2006 and …
-
Design, Testing and Evaluation of an Air Injection Grouting System for Geothermal Bores
… research was to examine the feasibility of an air injection grouting system for geothermal bores. The system that was researched used a pressurized blow tank to pneumatically transport dry bentonite granules through a three quarter inch hose into a wet bore. Upon contact with the annular fluid …
-
Laboratory Investigation of High Pressure Air Injection (HPAI) in a Dolomite Reservoir Core
… using thermal recovery by High Pressure Air Injection (HPAI) on a Mexican light oil reservoir. The main difference between HPAI and In Situ Combustion (ISC) is that the latter term is used to refer to air injection-based processes in heavy oil reservoirs, which require operation in the …
-
Start up of anaerobic bioreactor landfills in cold climates by intermittent air injection
Thesis (Ph. D.)--Michigan State University. Department of Civil and Environmental Engineering, 2005
Page 1 of 9