Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 14 of 14 for “"Air-Inflated"”.

  1. Effect of membrane weight on vibrations of air-inflated dams

    … membrane structures, pressurized with either air, water, or both, which have been used in recent years as a means of temporarily impounding water. A number of procedures have been developed to investigate the static behavior of the dams, but the dynamic behavior has been largely neglected. The …

    vt Repository record for Effect of membrane weight on vibrations of air-inflated dams (opens in a new tab)

  2. Field Study to Evaluate Driver Fatigue Performance in Air-Inflated Truck Seats

    … - one a polyurethane foam cushion and one an air-inflated cushion. Objective measurements of pressure distribution were taken throughout each test session, while subjective measurements were collected using surveys taken at one-hour intervals. Based on these results, we find that the …

    vt Repository record for Field Study to Evaluate Driver Fatigue Performance in Air-Inflated Truck Seats (opens in a new tab)

  3. A Comparative Analysis of Air-inflated and Foam Seat Cushions for Truck Seats

    A comprehensive comparison between an air-inflated seat cushion designed for truck seats and a commonly used foam cushion is provided, using a single-axis test rig designed for dynamic seat testing. Different types of tests are conducted in order to evaluate various aspects of each type of cushion; …

    vt Repository record for A Comparative Analysis of Air-inflated and Foam Seat Cushions for Truck Seats (opens in a new tab)

  4. A Study of the Effect of Varying Air-Inflated Seat Cushion Parameters on Seating Comfort

    … The objective of this thesis is to examine air-inflated seat cushions to determine how seating comfort (determined by pressure change rate) is affected by changing various parameters of the cushion. To this end, a mathematical model was built using MatLab and SimuLINK to accurately …

    vt Repository record for A Study of the Effect of Varying Air-Inflated Seat Cushion Parameters on Seating Comfort (opens in a new tab)

  5. Marino te hau = calm the wind : an exegesis presented in partial fulfilment of the requirements for the degree of Master of Fine Arts at Massey University Te Kunenga ki Pūrehuroa, Wellington, Aotearoa, New Zealand

    … myth, and material process. Through large scale air-inflated sculptural forms made from parachutes and other repurposed materials, the project is an adaptation of printmaking beyond the frame and into atmospheric space, where air and breath become medium and metaphor. Engaging mythic figures such …

    massey Repository record for Marino te hau = calm the wind : an exegesis presented in partial fulfilment of the requirements for the degree of Master of Fine Arts at Massey University Te Kunenga ki Pūrehuroa, Wellington, Aotearoa, New Zealand (opens in a new tab)

  6. Nonlinear vibration analysis of inflatable dams

    … In this study, the equation of motion for an air-inflated dam is derived, then solved using the Galerkin approximation method. The solution is performed for a one-term approximation and a two-term approximation, where both solutions use a sine function to approximate the deflected shape of the …

    vt Repository record for Nonlinear vibration analysis of inflatable dams (opens in a new tab)

  7. Free vibrations of inflatable dams

    … the linear two-dimensional free vibrations of an inflated cylindrical membrane. An air-inflated membrane is considered first. Vibration frequencies and modes are determined for various cases. The lowest mode shape is anti-symmetric. In the rest of the work, the membrane is inflated with water. In …

    vt Repository record for Free vibrations of inflatable dams (opens in a new tab)

  8. EFFECT OF NITROGEN FILLING ON TIRE ROLLING RESISTANCE AND VEHICLE FUEL ECONOMY

    … contact with the road. The rolling resistance of inflated tires is an important component of resistance to vehicle motion and contributes to vehicle fuel consumption. Many research works have been focused on how the various tire parameters (e.g., load, inflation pressure and speed) affect rolling …

    clemson Repository record for EFFECT OF NITROGEN FILLING ON TIRE ROLLING RESISTANCE AND VEHICLE FUEL ECONOMY (opens in a new tab)

  9. Analysis of the vibrations of inflatable dams under overflow conditions

    … the equilibrium state. The dam is inextensible, air-inflated, and has two anchored points. The base width, curved perimeter, and internal air pressure are given. The overflow is incompressible, inviscid, and irrotational, and the total head is specified. In the static analysis, the self-weight of …

    vt Repository record for Analysis of the vibrations of inflatable dams under overflow conditions (opens in a new tab)

  10. Experimental investigation on the dynamics of inflatable dams

    … as dams are considered here. Single-anchored air-inflated membranes are predominantly studied. Load combinations are considered without any water, with impounding water, and with water overflow. The two major experimental variables are the dam's internal pressure and the stream's flow rate or …

    vt Repository record for Experimental investigation on the dynamics of inflatable dams (opens in a new tab)

  11. Vibration Analysis of Single - Anchor Inflatable Dams

    … modeled as an elastic shell. It is assumed to be air-inflated and resting on a rigid foundation. The cross-sectional perimeter, material thickness, modulus of elasticity, and Poisson's ratio are given. The analysis is performed for different values of internal pressure and external water heads. …

    vt Repository record for Vibration Analysis of Single - Anchor Inflatable Dams (opens in a new tab)

  12. The First Moving Load Simulator for Testing Bridges in Canada and its Application on a Full Scale Precast Box Girder

    … of a large tandem, each comprising a dual air-inflated tires spaced at either 1.2 or 2.4 m. Each half-axle can apply up to 125 kN, representing the heaviest half-axle load of the CL-625 design truck of CHBDC. The maximum travel range and speed are 14.9 m and 6 ms, respectively. A bridge …

    queens Repository record for The First Moving Load Simulator for Testing Bridges in Canada and its Application on a Full Scale Precast Box Girder (opens in a new tab)

  13. Flight simulation and stability control of wingsuits

    … increase in lift during flight through the air. A wingsuit flight normally starts by a pilot jumping from a point that provides sufficient altitude for flight and ends by deploying a parachute. During the flight, the pilot can adjust his or her arms and legs to make different body …

    gatech Repository record for Flight simulation and stability control of wingsuits (opens in a new tab)

  14. Analysis of tire-pavement interaction and pavement responses using a decoupled modeling approach

    … using a decoupled modeling approach. First, an air-inflated three-dimensional (3-D) finite element (FE) tire model was built and the interaction between a tire and a non-deformable pavement surface was simulated. The tire is modeled as a composite structure including rubber and reinforcement. …

    uiuc Repository record for Analysis of tire-pavement interaction and pavement responses using a decoupled modeling approach (opens in a new tab)