Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 78 for “"Air-coupled"”.
-
Air-coupled ultrasonic measurements in composites
<p>Air-coupled ultrasound is a non-contact technique and has clear advantages over water-coupled testing. This work aims at gaining quantitative understanding of the principles underlining air-coupled ultrasonic measurement. The beams of air transducers, with and without Apodization, were mapped …
-
Variable Frequency Air Coupled Ultrasonic Phased Array Sensors
… phased array approach is extended to work with aircapacitive ultrasonic transducer, the design and development of which is outlined in the work detailed in the thesis A simulation study of the excitation modal frequencies comparing the analytical and the numerical air-damped approach are …
-
Air-coupled ultrasonic tomographic imaging of concrete elements
… internal velocity variations can be constructed. Air-coupled UPV can allow for more automated and rapid collection of data for tomography of concrete. This research aims to integrate recent developments in air-coupled ultrasonic measurements with advanced tomography technology and apply them to …
-
Additive manufacturing (3D print) of air-coupled diaphragm ultrasonic transdrucers
Air-coupled ultrasound is a non-contact technology that has become increasingly common in Non Destructive Evaluation (NDE) and material evaluation. Normally, the bandwidth of a conventional transducer can be enhanced, but with a cost to its sensitivity. However, low sensitivity is very …
-
A frequency agile approach to air-coupled Lamb wave inspection
… and evaluation of a single sided through-air Lamb wave scanner for Non-Destructive Evaluation (NDE). The new scanning system utilises novel wideband piezocomposite transducers and specialised receive electronics to detect and monitor the thickness of faults within the structure under …
-
Ultrasonic Nondestructive Evaluation Using Non-Contact Air-Coupled Lamb Waves
… system is constructed by using a non-contact air-coupled piezoelectric transducer (ACT) for actuation and remote scanning laser Doppler vibrometer (SLDV) for sensing. Extensive studies on ACT configuration, actuation, and calibration are conducted to operate ACT actuation with optimal …
-
Advancements in evaluation of air-coupled impact-echo test method
… work to investigate a recently-developed air-coupled impact-echo (IE) nondestructive testing (NDT) method, in which microphones replace the traditional physically-coupled IE sensors. To develop an optimum testing system and verify the new method, two concrete plates were tested in the …
-
Non-Contact NDT of Concrete Structures Using Air -Coupled Sensors
The second application is air-coupled impact-echo. Two reinforced concrete slabs containing different types of defects were inspected using an air-coupled impact test testing scheme. 2-D scanning impact-echo tests were conducted over the slab containing voids and delaminations. The 2-D scanning …
-
Air-coupled Capacitive Micromachined Ultrasonic Transducers based on Annular Cell Geometry
Air-coupled ultrasound is gaining increasing industry momentum due to the demands and development of non-destructive evaluation (NDE) of aerospace composite materials. Currently, the micromachining technology has advanced such that vacuum cavities sealed by thin plates, known as Capacitive …
-
An air-coupled ultrasonic array scanning system for rapid through transmission NDT
… now being used frequently in the manufacture of aircraft. The complexity of the material manufacture necessitates that evaluation is required prior to final production and it is the development of a novel approach to this testing that constitutes the focus for the work of this Thesis. Existing …
-
Non-Contact Acoustic Emission Detection of Rail Defects Using Air-Coupled Sensors
… addresses this critical concern by testing air-coupled optical microphones for non-contact AE detection. The goal of this research is to investigate AE signal characteristics using both rail-mounted and vehicle-mounted methods, establishing the understanding of AE signals in relation to …
-
Air-coupled impact-echo damage detection in reinforced concrete using wavelet transforms
Decline of the state of infrastructure in North America due to aging over the past decades has spawned burgeoning interest in the detection of internal damage of reinforced concrete (RC) structures via nondestructive testing. This study proposes a new impact-echo analysis method using wavelet …
-
Air-coupled Ultrasonic Arrays for Inspection of Pipe Internal Geometry and Condition
… requiring manual review of the captured images. Air-coupled ultrasonic arrays possess some qualities that lend themselves to this inspection problem, but have yet to see application here. They are capable of producing 3-D spatial images, which can be used to map out the interior geometry of …
-
Novel air-coupled heat exchangers for waste heat-driven absorption heat pumps
A detailed investigation of novel air-coupled absorbers for use in a diesel engine exhaust-driven ammonia-water absorption system operating in extreme ambient conditions was conducted. Electrically driven vapor-compression systems are under scrutiny due to the environmental impact of synthetic …
-
Nondestructive evaluation of a carbon fiber wing spar using air-coupled ultrasound
… of the laminate are discussed in this thesis. Air-coupled ultrasound, the computer aided tap tester, and pitch-catch contact ultrasound are the nondestructive methods employed for the inspection of a carbon fiber reinforced composite main wing spar. Impact damage and foreign object inclusions …
-
Air-coupled non-destructive evaluation technology for condition assessment of railroad ties
This study describes the development of fully air-coupled non-destructive evaluation (NDE) technology for condition assessment of railroad ties. Ultrasonic surface waves are generated in railroad ties using an air-coupled ultrasonic sender. Surface waves are sensed at the receiving end using an …
-
Analysis of air-coupled system for exciting and sensing stress waves in concrete
… bridges. Recent studies show the feasibility of air-coupled sensing, which eliminates the contact requirement and thus accelerates IE test. To further improve the test speed, a fully non-contact IE test using air-coupled sensing and excitation is investigated in this dissertation. This …
-
An evaluation of 1-3 connectivity composite transducers for air-coupled ultrasonic applications
… should ideally propagate across an intermediate airgap. This possibility has been inhibited by the lack of a suitable transducer technology to overcome the practical difficulties inherent in the air medium. The large acoustic impedance mismatch, between a piezoelectric element and air, and the …
-
Simulation and comparison of vapor-compression driven, liquid- and air-coupled cooling systems
… cooling systems that either directly supply cold air to the various locations, or cool an intermediate single-phase coolant closed loop, which in turn serves as the coolant for the passenger cabins and auxiliary loads such as electronics modules. Efforts are underway to enhance the performance of …
Page 1 of 4