Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 14 of 14 for “"Airplanes Fuselage"”.

  1. Active control of interior noise using piezoelectric actuators in a large-scale composite fuselage model

    … interior noise in a realistic composite aircraft fuselage is experimentally studied. The control inputs are due to piezoelectric actuators bonded to the cylinder wall while error information from the interior acoustic field is sensed by microphones. A preliminary analytical development was …

    vt Repository record for Active control of interior noise using piezoelectric actuators in a large-scale composite fuselage model (opens in a new tab)

  2. Small fatigue crack detection using phased array technology

    … layered lap joint configuration. Mock aircraft fuselage panels were created by overlapping two 0.063 inch thick 2024-T3 aluminum plates with three rows of fasteners. These test specimens were then subjected to a cyclic tension-tension loading between 3,276 lb and 327 lb. These specimens were …

    ttu Repository record for Small fatigue crack detection using phased array technology (opens in a new tab)

  3. Optimal design of composite fuselage frames for crashworthiness

    … to address the problem of designing composite fuselage frames for crashworthiness. A key feature of any optimization strategy for increasing structural crashworthiness is a progressive failure analysis. Currently, the most widely used analysis methods for progressive failure of composite …

    vt Repository record for Optimal design of composite fuselage frames for crashworthiness (opens in a new tab)

  4. Rule-based fuselage and spine and cross-section methods for computer aided design of aircraft components

    … are needed. One such method, the Rule-Based Fuselage method, was suggested by Lockheed. The Rule-Based Fuselage method allows an aircraft designer to define complex aircraft fuselage geometry by specifying the fuselage profile and individual parametric cross-sections along the fuselage. This …

    vt Repository record for Rule-based fuselage and spine and cross-section methods for computer aided design of aircraft components (opens in a new tab)

  5. Detection and characterization of impact damage in carbon fiber aircraft fuselage structure

    … characterize damage in full-scale carbon fiber fuselage structure. It also examines embedded and bonded methods of deploying an in-situ fiber optic (FO) Swept Wavelength Interferometry (SWI) strain sensing system for damage detection. The hypothesis is that the more advanced scanning …

    unm Repository record for Detection and characterization of impact damage in carbon fiber aircraft fuselage structure (opens in a new tab)

  6. Optimisation and improvement of the design of scarf repairs to aircraft

    … are used, particularly on the surface of the fuselage, wings and other external surfaces. The use of these repairs, whilst difficult to manufacture provide an aerodynamic, “stealthy” finish that is also more structurally efficient than overlap repairs. This research was undertaken to improve …

    unsw Repository record for Optimisation and improvement of the design of scarf repairs to aircraft (opens in a new tab)

  7. Fatigue and damage tolerance assessment of aircraft structure under uncertainty

    This thesis presents a new modeling framework and application methodology for the study of aircraft structures. The framework provides a ‘cradle-to-grave’ approach to structural analysis of a component, where structural integrity encompasses all phases of its lifespan. The methodology examines the …

    gatech Repository record for Fatigue and damage tolerance assessment of aircraft structure under uncertainty (opens in a new tab)

  8. LS-DYNA3D Modeling and Simulation for Uncontained Engine Debris Impact on Fuselage Skins

    … events for uncontained engine debris on fuselage skins are simulated using the LS-DYNA3D finite element analysis code. The LS-DYNA3D code is a nonlinear transient dynamic simulation tool with contact algorithms for impact. A finite element analysis is used to simulate the penetration of …

    odu Repository record for LS-DYNA3D Modeling and Simulation for Uncontained Engine Debris Impact on Fuselage Skins (opens in a new tab)

  9. Investigation of the effect of fuselage dents on compressive failure load

    … aircrafts is related to dent removal from fuselages. This thesis is a preliminary investigation of aircraft fuselage dents using the Finite Element Method (FEM) via FEA ABAQUS software. We investigated single impact dent on fuselage panel at various locations and impact speeds. The material …

    nps Repository record for Investigation of the effect of fuselage dents on compressive failure load (opens in a new tab)