Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 17 of 17 for “"Airy stress function"”.

  1. ASSUMED STRESS FUNCTION FINITE ELEMENT METHOD (STRUCTURES, COMPLEMENTARY ENERGY, BLENDING INTERPOLATION).

    A finite element formulation, based on assumed stress functions, is developed for the linear elastic analysis of the stresses in two-dimensional elasticity problems, including multiply-connected regions and flat plate bending. For planar analysis the Airy stress function is utilized. The physical …

    arizona-thes Repository record for ASSUMED STRESS FUNCTION FINITE ELEMENT METHOD (STRUCTURES, COMPLEMENTARY ENERGY, BLENDING INTERPOLATION). (opens in a new tab)

  2. Analytical solutions to selected boundary value problems and their application to Rocky Mountain foreland deformation

    The Airy stress function is used, via the Principle of Superposition and the series summation concept, to obtain stress states in a static, self-gravitating elastic beam subjected to boundary stresses. The boundary conditions investigated are more complicated than those previously published and …

    rice Repository record for Analytical solutions to selected boundary value problems and their application to Rocky Mountain foreland deformation (opens in a new tab)

  3. Plane Elasticity Using Airy Stress Functions

    … dimensional solid element in a state of plane stress or plane strain with conservative body forces, the stress components are equal to the appropriate second order partial derivatives of a bi-harmonic function, ϕ , called an Airy Stress Function. It follows that the stress components …

    rit Repository record for Plane Elasticity Using Airy Stress Functions (opens in a new tab)

  4. The Development and Application of a Trapezoidal Shear Panel for Use in Finite Element Codes

    … to model aircraft structures. An equilibrium stress-based element with pure shear resultants on its sides was developed using the principle of complementary virtual work. The internal stress field was derived from a complete polynomial Airy stress function. The element was numerically tested …

    embry-riddle Repository record for The Development and Application of a Trapezoidal Shear Panel for Use in Finite Element Codes (opens in a new tab)

  5. Analysis of stress singularity of adhered contacts in MEMS

    … at adhered contacts because of biomaterial stress singularities at interface comers. Magnitude of the stress field induced due to this singularity is given by the value of the notch stress intensity. Hence it becomes very important to design MEMS devices based on the stress …

    ttu Repository record for Analysis of stress singularity of adhered contacts in MEMS (opens in a new tab)

  6. Determination of stress intensity factors for laboratory test specimens using numerical methods

    Using the Airy stress function, plane bnear elasticity problems reduce to solving a biharmonic problem of the first type. Analytic solutions to the biharmonic problems of the first type in a domain with a re-entrant sharp corner are discussed in this thesis. General solutions to the biharmonic …

    ubc Repository record for Determination of stress intensity factors for laboratory test specimens using numerical methods (opens in a new tab) Download PDF for Determination of stress intensity factors for laboratory test specimens using numerical methods (opens in a new tab)

  7. AN INTEGRAL EQUATION METHOD FOR CUTOUT PROBLEMS IN SHELLS

    … described for the determination of the state of stress in a shallow shell with a single curvilinear hole. A system of two coupled integral equations is obtained using the Green's function method. Each of these equations includes a contour integral associated with the corresponding plate solution …

    nebraska Repository record for AN INTEGRAL EQUATION METHOD FOR CUTOUT PROBLEMS IN SHELLS (opens in a new tab)

  8. A variational solution of the frictional unloading problem in linear elasticity

    … a minimum within the subset of admissable stress states; that is those that obey the equilibrium equations and the boundary conditions on stress. By considering the general traction boundery value problem, the complementary energy is reduced to a quadratic functional of the unknown surface …

    oxford Repository record for A variational solution of the frictional unloading problem in linear elasticity (opens in a new tab)

  9. Εφαρμογή του μοντέλου της βαθμοελαστικότητας στη νανοκλίμακα

    … to determine their elastic modulus and residual stresses. The Third chapter is devoted to correlating micro/nano technology and gradient elasticity with special interest given to modern technological problems where the classical elasticity analysis is not sufficient. In particular, Stoney’s …

    greece Repository record for Εφαρμογή του μοντέλου της βαθμοελαστικότητας στη νανοκλίμακα (opens in a new tab)

  10. Analytic modelling of the deformation due to plate coupling at subduction zones

    … earthquakes result from the build-up of coupling stresses between tectonic plates at subduction zones. These earthquakes arise, periodically, when the accumulating stress reaches a level which exceeds the rupture strength of the interface. The stresses along the interface may be inferred from …

    ubc Repository record for Analytic modelling of the deformation due to plate coupling at subduction zones (opens in a new tab) Download PDF for Analytic modelling of the deformation due to plate coupling at subduction zones (opens in a new tab)

  11. Ανάλυση της συμπεριφοράς στρωσιγενούς πετρώματος γύρω από υπόγεια ανοίγματα

    … part, an analytical solution is acquired by an Airy stress function solution for a fixed beam under its own weight based on Timoshenko beam theory. A finite difference numerical solution is performed and verified. The model is then used to investigate the behavior of a two-member stratified roof …

    greece Repository record for Ανάλυση της συμπεριφοράς στρωσιγενούς πετρώματος γύρω από υπόγεια ανοίγματα (opens in a new tab)

  12. Two enabling developments for computational contact mechanics

    … uniform distribution of nodes and a set of basis functions for traction are defined so that each basis function has a value of 1 in the vicinity of the corresponding node and a value of zero elsewhere. The surface displacement field associated with each traction basis function is obtained through …

    msu Repository record for Two enabling developments for computational contact mechanics (opens in a new tab)

  13. Analýza vybraných metod pro řešení krutu tyčí s nekruhovým příčným průřezem

    Tato bakalářská práce se zabývá analýzou vybraných metod pro řešení krutu tyčí s nekruhovým příčným průřezem. Práce je rozdělena na dvě části část rešeršní a část výpočtová. V první části byly zavedeny všechny potřebné pojmy a vztahy, které jsou dále aplikovány v analyzovaných metodách. Ve druhé …

    brno-tech Repository record for Analýza vybraných metod pro řešení krutu tyčí s nekruhovým příčným průřezem (opens in a new tab)

  14. Řešení vybraných úloh pružnosti pomocí Airyho funkce napětí

    … vybraných úloh z pružnosti pevnosti pomocí Airyho funkce napětí. V práci je nejprve popsáno užití a zavedení této funkce a metody, které funkci využívají při řešení úloh. Ve výpočetní části jsou řešeny vybrané úlohy Airyho funkcí napětí a jejich řešení je srovnáno s řešením, které bychom …

    brno-tech Repository record for Řešení vybraných úloh pružnosti pomocí Airyho funkce napětí (opens in a new tab)

  15. Popis rozložení napětí v okolí ostrého vrubu

    Předkládaná diplomová práce se zabývá problémem stanovení exponentu singularity napětí u vrubu. Tuto práci lze rozdělit do dvou částí. První se zabývá teoretickým pozadím, tj. základními vztahy mechaniky kontinua a základními pojmy lomové mechaniky. Druhá část se zabývá sestavením postupu řešení …

    brno-tech Repository record for Popis rozložení napětí v okolí ostrého vrubu (opens in a new tab)

  16. Napjatostní a pevnostní analýza ramene kliky nekruhového průřezu u jízdního kola

    Tato bakalářská práce pojednává o analytickém řešení krutu u tyče s obdélníkovým profilem. Řešení je podloženo Prandtlovým popisem krutu tyče obecného průřezu. V celkové napjatosti v klice se uvažuje smykové napětí od kroutícího momentu a od posouvajících sil, dále normálové napětí od ohybových …

    brno-tech Repository record for Napjatostní a pevnostní analýza ramene kliky nekruhového průřezu u jízdního kola (opens in a new tab)

  17. Αλληλεπίδραση ρευστού-κυτταρικού βιολογικού υλικού σε αγγεία και πορώδη μέσα

    … method of local spatial averaging with a weight function is implemented in order to establish the partial differential equations that describe the dynamics of fluid flow and matrix deformation at the coarser scale. The hypotheses and conditions which delimit the domain of validity of the upscaled …

    greece Repository record for Αλληλεπίδραση ρευστού-κυτταρικού βιολογικού υλικού σε αγγεία και πορώδη μέσα (opens in a new tab)