Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 51 for “"Al 6061"”.

  1. The Microstructural Annealing Response of Cold Gas Dynamically Sprayed Al 6061

    The Cold-Gas Dynamic-Spray process also known as Cold Spray (CS) has been researched for three decades. The CS process is a solid-state deposition technique via supersonic velocity of powder particles at a temperature significantly below the melting point of the spray material. This thesis presents …

    unf Repository record for The Microstructural Annealing Response of Cold Gas Dynamically Sprayed Al 6061 (opens in a new tab) Download PDF for The Microstructural Annealing Response of Cold Gas Dynamically Sprayed Al 6061 (opens in a new tab)

  2. Microstructure and mechanical properties of friction stir welded aluminum alloy Al 6061-T651

    … for strong, light weight, and robust materials that can be used in extreme environments has increased. The use of such materials has been significant in the transportation sector, where reduction in fuel consumption and emission of harmful gases are required. Aluminum is one of the most …

    sask Repository record for Microstructure and mechanical properties of friction stir welded aluminum alloy Al 6061-T651 (opens in a new tab)

  3. Modeling the depth of penetration in laser welded Al 6061 using statistical and neural network approaches

    <p>This research attempted to evaluate the capibilities of modeling the depth of penetration in laser welded A1 6061 using both traditional statistical modeling tools and artificial neural networks. Aluminum 6061 was welded with a pulsed 400W Nd:YAG laser. The experiment consisted of measuring …

    ut-knoxville Repository record for Modeling the depth of penetration in laser welded Al 6061 using statistical and neural network approaches (opens in a new tab)

  4. An analysis of the microstructure and reinforcement distribution of an extruded particle-reinforced Al 6061-10 volume percent A1O3 metal matrix composite

    … was performed in conjunction with funding by DURALCAN- USA through a Cooperative Research and Development Agreement (CRDA). The program seeks to improve the ductility of cast and extruded Al 6061-Al203 metal matrix composite (MMC) materials. Annealing stages were designed to be introduced into …

    nps Repository record for An analysis of the microstructure and reinforcement distribution of an extruded particle-reinforced Al 6061-10 volume percent A1O3 metal matrix composite (opens in a new tab)

  5. Surface nitridation of aluminum alloys for protective nitride coating

    … chamber components that are primarily made of aluminum alloys such as Al-6061. A technology to prolong life of chamber components was sought with the goal of resisting fluorine diffusion. AlN is a well-known diffusion barrier to fluorine in the semiconductor industry. However, there is no …

    bu Repository record for Surface nitridation of aluminum alloys for protective nitride coating (opens in a new tab)

  6. Investigation of electroless nickel undercoat for duplex nickel chromium electrodeposition onto aluminium and its alloys

    … the deposition of a multilayer coating onto two aluminium alloys: Al 1050 and Al 6061. Of particular interest has been the treatment of the surface of both these samples for deposition of metallic coatings through a zincate based immersion process. The zinc immersion layer chemically displaces …

    wlv Repository record for Investigation of electroless nickel undercoat for duplex nickel chromium electrodeposition onto aluminium and its alloys (opens in a new tab) Download file for Investigation of electroless nickel undercoat for duplex nickel chromium electrodeposition onto aluminium and its alloys (opens in a new tab)

  7. Corrosion protection mechanisms of trivalent chromium based passivations on γ-ZnNi coated Al6061-T6 alloy

    <p>“The role of cobalt in trivalent chromium passivations (TCPs) to improve corrosion resistance of γ-ZnNi coated steel and aluminum is based on its effect on hexavalent chromium content in the passive layer. Investigations of both a cobalt-containing and cobalt-free TCP on SAE 1008 steel indicated …

    must-thes Repository record for Corrosion protection mechanisms of trivalent chromium based passivations on γ-ZnNi coated Al6061-T6 alloy (opens in a new tab)

  8. Porovnání analytického a numerického řešení vzpěrné stability profilu z hliníkové slitiny

    Tato bakalářská práce se zabývá řešením vzpěrné stability tenkostěnného profilu, vyrobeného z hliníkové slitiny Al 6061.T6. Řešení je provedeno analytickými a numerickými metodami. K numerickému řešení byl využit program Abaqus, fungující na bázi metody konečných prvků. Cílem bylo zjistit maximální …

    brno-tech Repository record for Porovnání analytického a numerického řešení vzpěrné stability profilu z hliníkové slitiny (opens in a new tab)

  9. Optimization of the sintering process: metal matrix composites and zinc oxide varistors

    The sintering process of Metal Matrix Composites and Ceramic Varistors has been studied in this project. Metal Matrix Composites of A1/A1203 and Al-6061/SiC and ceramic ZnO varistors were manufactured through compaction and sintering process. The compressibility of A1/A1203 was studied with respect …

    dcu Download PDF for Optimization of the sintering process: metal matrix composites and zinc oxide varistors (opens in a new tab)

  10. Analysis of Activation and Residual Radiation Doses in the MEC-U Laser Facility

    … beyond tens of MeV during each experiment. Normal operation of this facility will result in activation of the instrumentation and structure in the experimental hutch. This research aims to quantify the hazards from activation over the lifetime of the MEC-U, and use this data to make informed …

    gatech Repository record for Analysis of Activation and Residual Radiation Doses in the MEC-U Laser Facility (opens in a new tab)

  11. ΠΡΟΒΛΕΨΗ ΤΗΣ ΔΙΑΔΟΣΗΣ ΡΩΓΜΩΝ ΣΕ ΤΥΧΑΙΑ ΜΕΤΑΒΑΛΛΟΜΕΝΑ ΦΟΡΤΙΑ

    … ΑΕΡΟΠΟΡΙΚΑ ΙΣΤΟΡΙΚΑ ΦΟΡΤΙΣΗΣ ΓΙΑ ΤΑ ΥΛΙΚΑ AL-2024-T3, AL-6061-T6 ΚΑΙ AL-8090-T8. ΟΙ ΠΡΟΒΛΕΨΕΙΣ ΔΙΑΔΟΣΗΣ ΡΩΓΜΗΣ ΓΙΑ ΤΑ ΥΛΙΚΑ ΑΥΤΑ ΗΤΑΝ ΣΕΚΑΛΗ ΑΡΜΟΝΙΑ ΜΕ ΤΑ ΠΕΙΡΑΜΑΤΙΚΑ ΑΠΟΤΕΛΕΣΜΑΤΑ.

    greece Repository record for ΠΡΟΒΛΕΨΗ ΤΗΣ ΔΙΑΔΟΣΗΣ ΡΩΓΜΩΝ ΣΕ ΤΥΧΑΙΑ ΜΕΤΑΒΑΛΛΟΜΕΝΑ ΦΟΡΤΙΑ (opens in a new tab)

  12. Effect of thermal residual stresses on the stress-strain behavior of metal-matrix composites

    A phenomenological and parametric study was conducted to assess the effect of thermal residual stresses on the stressstrain response of a discontinuous fiber-reinforced metalmatrix composite in tensile and compressive loading. The material chosen for this investigation was the SiC-whisker …

    nps Repository record for Effect of thermal residual stresses on the stress-strain behavior of metal-matrix composites (opens in a new tab)

  13. FIRST-PRINCIPLES AND MACHINE LEARNING INVESTIGATION OF REFRACTORY HIGH ENTROPY ALLOYS AND CONVENTIONAL ALLOYS.

    Refractory high entropy alloys (RHEAs) are gaining prominence because of their balanced mechanical properties and are regarded as suitable alloys for a variety of applications such as aerospace, structural material, nuclear, and hydrogen storage. The first part of the dissertation explored the …

    lsu-thes Repository record for FIRST-PRINCIPLES AND MACHINE LEARNING INVESTIGATION OF REFRACTORY HIGH ENTROPY ALLOYS AND CONVENTIONAL ALLOYS. (opens in a new tab)

  14. An investigation into the failure of aluminum alloys

    The rate dependence of several aluminum alloys (6061, 7075, 5083) was examined through the means of quasi-static tension tests, dynamic tension tests, and split pressure Hopkinson bar tests. The macroscopic strains of the quasi-static and dynamic tension tests were measured after failure within the …

    texas Repository record for An investigation into the failure of aluminum alloys (opens in a new tab)

  15. Mechanical properties of metallic materials subjected to current pulses

    Materials used in high-current applications -- Al6061-T6 and Cu 102 -- are subjected to heat pulses of short duration (in the range of a few hundred microseconds to a few milliseconds); immediately following or along with such heat pulses, the specimens are subjected to large mechanical forces. The …

    texas Repository record for Mechanical properties of metallic materials subjected to current pulses (opens in a new tab) Restricted access

  16. Design and development of a multifunctional composite radiation shield for space applications

    … (CSA) in conjunction with the other departmental agencies and industrial partners. PCW mission will provide essential communications and meteorological services to the Canadian Arctic, as well as space weather observations of ionizing radiation along the orbit. The CSA has identified three …

    manitoba Repository record for Design and development of a multifunctional composite radiation shield for space applications (opens in a new tab)

  17. Optical generation of tone-burst Rayleigh surface waves for nonlinear ultrasonic measurements

    Conventional contact ultrasonic methods suffer from large variability, which is known to originate from a number of sources such as coupling variability, and the surface roughness at the transducer/specimen interface. The inherently small higherharmonic signals can be significantly influenced by …

    gatech Repository record for Optical generation of tone-burst Rayleigh surface waves for nonlinear ultrasonic measurements (opens in a new tab)

  18. Design, Validation, and Verification of the Cal Poly Educational Cubesat Kit Structure

    … of a structure for use in an educational CubeSat kit is explored. The potential uses of this kit include augmenting existing curricula with aspects of hands on learning, developing new ways of training students on proper space systems engineering practices, and overall contributing to …

    calpoly Repository record for Design, Validation, and Verification of the Cal Poly Educational Cubesat Kit Structure (opens in a new tab)

  19. ML-empowered Nondestructive Evaluation in Additive Manufacturing

    … AI-based approaches to enhance Nondestructive Evaluation in Additive Manufacturing (AM). As a larger workflow that aims to design complex alloys and shape memory polymers for AM, this effort tries to leverage machine learning to achieve performance and structural integrity goals in the material …

    lsu-thes Repository record for ML-empowered Nondestructive Evaluation in Additive Manufacturing (opens in a new tab)

  20. Fabrication and characterization of bulk nanostructured materials of steel and aluminum alloys by air blast shot peening

    In recent years, bulk nanostructured materials processed by methods of severe plastic deformation (SPD) have attracted the growing interest in academia and industry. This interest is caused not only by unique physical and mechanical properties inherent to various nanostructured materials, e.g., …

    alabama Repository record for Fabrication and characterization of bulk nanostructured materials of steel and aluminum alloys by air blast shot peening (opens in a new tab)

Page 1 of 3