Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 170 for “"Al alloy"”.
-
Development of Al alloy composites by powder metallurgy routes
<p>Particulate reinforced Al alloy composites (AlMCs) are recognized as important structural materials due to their lightweight, high modulus and strength and high wear resistance. In order to understand the effect of matrix, reinforcement and secondary processing techniques on the microstructure …
-
Effect of titanium diboride particle size on al-alloy properties
Most experimental studies which investigate aluminium alloys and TiB2 additions focus on varying the quantities of material added to the alloy. This thesis attempts to address the lack of information regarding to what effect the particle size distribution of the TiB2 additions has on an A205 alloy. …
-
The Precipitation Hardening and Annealing Behavior of a Laminated Al Alloy System
… technology is reported to contain a compositional gradient between the different layers. The interface region exhibits various precipitation characteristic during the subsequent heat treatment. The precipitation behavior at the interface region and core layer of a laminated AA3xxx-AA6xxx alloy …
-
A Nacreous Self-Assembled Nanolaminate for Corrosion Resistance on 2024-Al Alloy
… and polymer were formed on mica, silicon, and aluminum 2024-T3 alloy using alternating solutions of positively and negatively charged polymer and clay, respectively. Atomic force microscopy was used to observe the morphology of the composite films on mica and silicon. It was found that solution …
-
Microstructural characterization of a 4043 Al alloy produced by molten metal deposition (MMD)
… production of complex geometries, reducing material waste, and offering unprecedented design flexibility. These advantages have made AM particularly attractive for industries such as aerospace, automotive and biomedical engineering. However, despite its growing adoption, conventional AM …
-
Hot Deformation Behavior of an Fe-Al Alloy Steel in Two Phase Region
… Cast Direct Rolling (TSCDR) process offers several economic and environmental advantages. The elimination of slab reheating and roughing deformation, however, leave fewer opportunities for grain refinement and some large grains persist in the microstructure. To solve this problem, a new chemistry …
-
Thermomechanical processing of an Al alloy 2519, and an assessment of its superplastic response
… prior to the rolling portion of a thermomechanical process (TMP) were examined to determine those combinations resulting in refined microstructures capable of supporting superplastic behavior. Specimens of processed Al 2519 were tension tested at elevated temperatures after varying TMP …
-
The effect of transition metal additions on double oxide film defects in Al alloy castings
… work investigated the effect of transition metal additions on the double oxide film defects in Al alloys. A bubble trapping experiment was initially conducted, which deliberately trapped an air bubble inside the aluminium melt for a period of time in three different Al alloys (Commercial purity …
-
Preparation of Extinction Free Gamma Ti-51at.%Al Alloy Powder and Characterization by X-ray Diffraction
… parameters, structure factors, and Debye-Waller temperature factor of a homogenized, binary Ti-51at.%Al intermetallic alloy were determined using powder X-ray diffraction (XRD). Previous studies have been hampered by extinction at low Bragg angles, therefore improved powdering methods were …
-
An investigation of the interatomic bonding characteristics of a Ti - 51at.% Al alloy by X-ray diffraction
… factors on an homogenized, binary, Ti-51at.%Al intermetallic alloy were investigated using powder X-ray diffraction procedures. Powder samples were prepared by pulverizing in a mortar and pestle lathe turnings taken from a sample ingot. The powder was then annealed to relieve the induced …
-
Influence of welding process variables on the structure of Fe-Cr-Al alloy weld overlay clad, The
Includes bibliographical references.
-
Effect of the Processing Route on the Localized Corrosion Susceptibility of Al Alloy AA7050 in Saline Solutions
… conducted to characterize and compare the localized corrosion susceptibility of the granular microstructure of aluminum (Al) alloy AA7050 in the peak aged T6 condition cast by the novel controlled diffusion solidification (CDS) process against the conventional wrought plate counterpart. CDS is …
-
Study of grain refinement in Al alloy 2519 using backscatter orientation-contrast mode in the scanning electron microscope
The effects of variations in thermomechanical processing (TMP) parameters on grain refinement in 2519 Al-Cu alloy were studies. Refined grains enhance tensile ductility and are a prerequisite for superplastic response. The TMP variables were adjusted based on particle stimulated nucleation (PSN) …
Page 1 of 9