Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 10 of 10 for “"Al-5083"”.

  1. Plasticity and Damage in Bimodal Grain Size Al-5083: Microstructural Finite Element

    Bimodal and nanocrystalline aluminum alloys are being investigated as stronger replacements for conventional polycrystalline aluminum alloys. Higher strengths are achieved by reducing the grain size of a metal; however, as the grain size is reduced the ductility diminishes. One solution that limits …

    utahstate Repository record for Plasticity and Damage in Bimodal Grain Size Al-5083: Microstructural Finite Element (opens in a new tab)

  2. Correlation of surface finish and cover gas with weld defects in autogenous AL 5083 laser beam welds

    <p>Aluminum laser weld quality is influenced by gas porosity and surface reflectivity. The experimental study was performed on A1 5083 in three parts: the first, to correlate surface finish and cover gas with porosity formation, the second, to establish the effects of the laser sustained plasma on …

    ut-knoxville Repository record for Correlation of surface finish and cover gas with weld defects in autogenous AL 5083 laser beam welds (opens in a new tab)

  3. Incremental equal channel angular pressing at elevated temperatures of Al 5083 and follow-up backward micro-extrusion of components

    … telecommunications, automotive, and medical fields,need small and precise micro parts. However, the main challenge lies in manufacturingthese microparts using the most suitable process. One promising option is backwardmicro-extrusion, which is characterised by low material consumption, low …

    strathclyde Repository record for Incremental equal channel angular pressing at elevated temperatures of Al 5083 and follow-up backward micro-extrusion of components (opens in a new tab)

  4. Development of aluminum-based coatings produced by Cold Gas Dynamic Spraying

    … below the melting point of the sprayed materials. The undesirable effects of high temperatures found in conventional thermal spray processes, such as oxidation, grain growth and thermal stresses, are therefore avoided. In response to the potential of CGDS, this study primarily explores and …

    ottawa-retro Repository record for Development of aluminum-based coatings produced by Cold Gas Dynamic Spraying (opens in a new tab)

  5. Effects of microstructure on the spall behavior of aluminum-magnesium alloys

    This research focuses on the spall properties of aluminum-magnesium (Al-Mg)alloys.Aluminum alloy 5083 (Al 5083) was used as a model alloy for the work performed in this study. Al-Mg alloys represent a light-weight and corrosion resistant alloy system often used in armor plating. It is desirable to …

    gatech Repository record for Effects of microstructure on the spall behavior of aluminum-magnesium alloys (opens in a new tab)

  6. Mechanical properties and microstructural characteristics of an Al-Mg alloy with bimodal grain size at room and elevated temperatures

    The strength of aluminum alloy 5083 has been shown to be significantly improved when it is engineered to have a bimodal grain size consisting of coarse grains (CGs) embedded in an ultrafine grained (UFG) matrix. This study investigates how a variety of parameters including strain rate, temperature, …

    alabama Repository record for Mechanical properties and microstructural characteristics of an Al-Mg alloy with bimodal grain size at room and elevated temperatures (opens in a new tab)

  7. Anti wetting additives for aluminosilicate refractories in molten aluminum contact applications

    "Aluminosilicate based refractories are widely used in furnace installations for melting aluminum because they are inexpensive, readily available and generally exhibit the properties desired from a refractory material. However, they face severe corrosion and degradation issues due to the extremely …

    must-thes Repository record for Anti wetting additives for aluminosilicate refractories in molten aluminum contact applications (opens in a new tab)

  8. Investigation of Microstructure and Mechanical Behavior of Novel Powder-Extruded Al-Ce-Mg Alloys

    <p>Pursuing advanced structural materials with enhanced performance, reduced weight, and lower costs is a constant endeavor in the aerospace and automotive industries. Conventional structural alloys, such as cast irons, carbon steels, and titanium alloys, have strength, weight, and cost …

    utk-theses Repository record for Investigation of Microstructure and Mechanical Behavior of Novel Powder-Extruded Al-Ce-Mg Alloys (opens in a new tab)

  9. Corrosion Protection of Friction Stir Welded Al 7075 Panel for use in Aerospace Applications using Cold Gas Dynamic Spray

    … as a means of joining previously unweldable Al 7075, a high-strength aluminum alloy commonly used in aerospace for its high specific strength. This eliminated the need for costly and time consuming rivets to be installed, firstly reducing the production cost of the airplane and secondly …

    ottawa-retro Repository record for Corrosion Protection of Friction Stir Welded Al 7075 Panel for use in Aerospace Applications using Cold Gas Dynamic Spray (opens in a new tab)

  10. Πειραματική και αριθμητική μελέτη ρομποτικών συγκολλήσεων λεπτών ελασμάτων κραμάτων αλουμινίου της σειράς 5xxx

    The design of a metallic construction that includes welding parts introduces special and specific difficulties. The presence of concentrated heat source, basically demanded for the welding of metallic elements, result adverse effects such as residual stresses, deformations, or metallurgical changes …

    greece Repository record for Πειραματική και αριθμητική μελέτη ρομποτικών συγκολλήσεων λεπτών ελασμάτων κραμάτων αλουμινίου της σειράς 5xxx (opens in a new tab)