Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 48 for “"Al-Li"”.
-
Fatigue crack propagation in Al-Li alloy 8090 : environmental effects
Fatigue crack propagation behaviour in Al-Li alloy 8090 plate were studied in four main testing environments: a relatively inert environment - desiccated air; and three freely corroding aqueous environments consisting of distilled water, 0.6 M NaCl and 1 M AlCl₃. It was found that the major role of …
-
An Analysis of the Effect of Ambient Temperature Aging on Al-Li Airframes
Aluminium Lithium (Al-Li) alloys exhibit behaviours in mechanical properties which separate them from conventional precipitation hardening aluminium (Al) alloys. One such behaviour is an increase in strength and a reduction in ductility which occurs as a result of exposure to relatively low …
-
Hot formability and microstructural development of spray-deposited Al-Li alloy and composite.
The deformational and microstructural behaviour of the commercial Al-Li alloy 8090 and an 8090 based composite containing silicon carbide particulate has been investigated. The materials were deformed at elevated temperature by the test methods of plane strain compression (PSC) and torsion to …
-
Effects of strain variations on aging response and corrosion properties of third generation Al-Li alloys
… specific stiffness (elastic modulus/density), Al-Li alloys are attractive alloys for structural aircraft applications. To produce contoured aircraft components from Al-Li wrought products, stretch forming prior to aging is a common manufacturing technique. The effects of different amounts of …
-
Elevated temperature creep behavior of a binary Al-Li alloy containing 2.0 weight percent lithium, The
Includes bibliographical references.
-
Thermodynamic Modeling of the Mg-Al-Li-Na-H System for Solid State Hydrogen Storage Applications
… work a thermodynamic database describing the Mg-Al-Li-Na-H system was constructed using thermodynamic modeling through the CALPHAD method. The constructed database was used to assess the hydrogen storage properties of the system at different pressures and temperatures and to understand the phase …
-
Exploration of incompatibility in Al-Li alloys using high energy diffraction microscopy and a crystal plasticity model
Aluminum-lithium (Al-Li) alloys have inherently desirable properties such as increased specific stiffness and strength. Without question, these alloys would be candidate materials for many aerospace structural designs if it were not for a complicated and confounding mode of fracture termed …
-
The use of friction-surface processing as a method of corrosion protection of a friction-stir weld in the AL-LI-CU alloy AA2050-T851
… corrosion of a friction-stir weld (FSW) in the Al-Li-Cu alloy AA2050-T851. The microstructure, hardness and corrosion behaviour of the base alloy, the FSW and the FSP regions was examined. The base alloy showed susceptibility to pitting parallel to the rolling direction and some intragranular …
-
Effect of surface treatment on the mechanical properties of the polysulfone-Al/Li bonded system including thin film studies of moisture intrusion and the viscoelastic response of the interphase region
An investigation of polysulfone-Al/Li alloy interaction involved single lap shear joints and wedge samples following an FPL etch, sulfuric acid anodization (SAA) and phosphoric acid anodization (PAA). The study of the Al/Li surfaces involved the determination of the elemental composition and …
-
Machinability study of aluminum-lithium alloys for aerospace applications: influences of heat treatments and machining conditions
This thesis investigates the machinability of advanced aluminum-lithium alloys (Al-Li, Al-Li- Cu, and Al-Li-Cu-Sc), prized for their low density, high tensile strength, and corrosion resistance, making them essential for aerospace applications. However, machining challenges such as reducing the …
-
Micromechanical models of delamination in aluminum-lithium alloys
Aluminum lithium (Al-Li) alloys are lighter, stiffer, and tougher than conventional aerospace aluminum alloys. Replacing conventional aluminums with Al-Li could substantially decrease the weight and cost of aerospace structures. However, Al-Li alloys often fracture intergranularly via a mechanism …
-
The "Lazy S" feature in Friction Stir Welding of AA2099 Aluminum-Lithium alloy
The addition of Lithium to Aluminum-Lithium (Al-Li) alloys results in reduced density as well as increased stiffness and strength, and so these materials are attractive for selected aerospace structures. Friction Stir Welding (FSW) of Al-Li alloys may provide high join efficiency in such structures …
-
Fatigue characterization and microstructure-sensitive modeling of extruded and friction stir welded aluminum lithium alloy 2099
Technological and design advances in military aircraft have dramatically changed the face of war. The need to rapidly deploy troops, military equipment and technology into conflict areas all over the globe, have placed aircrafts in a pivotal role in strategic battlefield operations. While enhanced …
Page 1 of 3