Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 92 for “"AlSi10Mg"”.

  1. Laser Powder Bed Fusion of AlSi10Mg+4Cu and AlSi10Mg alloys

    L'abstract è presente nell'allegato / the abstract is in the attachment

    poli-torino Repository record for Laser Powder Bed Fusion of AlSi10Mg+4Cu and AlSi10Mg alloys (opens in a new tab)

  2. Development of AlSi10Mg based alloys for Additive Manufacturing Processes

    L'abstract è presente nell'allegato / the abstract is in the attachment

    poli-torino Repository record for Development of AlSi10Mg based alloys for Additive Manufacturing Processes (opens in a new tab)

  3. Small-Scale Characterization Of Additively Manufactured And Heat Treated AlSi10Mg

    … characteristics of an additive manufactured AlSi10Mg alloy in the as-printed and heat treated conditions. Post heat treatment cycle were conducted at the elevated temperature of 520 ℃ solutionizing and then followed by four different cooling rates: water quenching (WQ), air cooling (AC), …

    nodak Repository record for Small-Scale Characterization Of Additively Manufactured And Heat Treated AlSi10Mg (opens in a new tab)

  4. Laser Powder Bed Fusion of AlSi10Mg for Fabrication of Fluid Power Components

    … of knowledge for process development in LPBF of AlSi10Mg in order to improve the resulting part density, surface roughness, and material performance for fluid power applications. The material performance is evaluated through a comparison with an existing product: the cast aluminum pump housing …

    waterloo Repository record for Laser Powder Bed Fusion of AlSi10Mg for Fabrication of Fluid Power Components (opens in a new tab)

  5. Analýza teplotního chování procesu aditivní výroby mikro-prutových struktur z materiálu AlSi10Mg

    Pomocí aditivních technologií je možné vyrábět složité díly, které jsou konvenčními technologiemi nevyrobitelné. Jedním z typických příkladů jsou mikro-prutové struktury. Výroba těchto struktur je poměrně náročná a odlišuje se od výroby objemových dílů. Cílem diplomové práce je popsání teplotního …

    brno-tech Repository record for Analýza teplotního chování procesu aditivní výroby mikro-prutových struktur z materiálu AlSi10Mg (opens in a new tab)

  6. Mechanical Characterization of Additively Manufactured Inconel 625 and AlSi10Mg via High-Throughput Tensile Testing

    … super-alloy Inconel 625 and the aluminum alloy AlSi10Mg after stress relief annealing. Statistical analysis using 3-parameter Weibull distributions is used to determine low-probably extreme values of both material’s mechanical properties. Abnormally low ductility values of hot isostatic pressed …

    unm Repository record for Mechanical Characterization of Additively Manufactured Inconel 625 and AlSi10Mg via High-Throughput Tensile Testing (opens in a new tab)

  7. The effect of hydrogen on gas porosity in Laser Powder Bed Fusion of AlSi10Mg

    … By limiting the hydrogen content of the AlSi10Mg powder and the solidification through build parameters, gas porosity can be reduced. In this study, three types of porosity were characterized in AlSi10Mg samples built by both SLM and Concept Laser systems. Trends relating to energy input …

    ut-knoxville Repository record for The effect of hydrogen on gas porosity in Laser Powder Bed Fusion of AlSi10Mg (opens in a new tab)

  8. Optimization and Characterization of Laser Powder Bed Fusion of AlSi10Mg for Complex Aerospace Structures

    … wall buckling. After the part was printed from AlSi10Mg using LPBF, it was subjected to compression testing. A novel test fixture was designed and validated to allow fixed-end free-end buckling testing. The design exhibited exceptionally even stress distribution and very high buckling …

    waterloo Repository record for Optimization and Characterization of Laser Powder Bed Fusion of AlSi10Mg for Complex Aerospace Structures (opens in a new tab)

  9. Deformation Rate-dependent Behavior of AlSi10Mg Alloy 3D-Printed via Laser Powder Bed Fusion

    … mechanisms, and work hardening behavior of AlSi10Mg alloy, 3D-printed via laser powder bed fusion, were comprehensively assessed as a function of strain, strain rate and stress state, considering the as-built optimized microstructure. Accordingly, in the first step, the process parameters …

    queens Repository record for Deformation Rate-dependent Behavior of AlSi10Mg Alloy 3D-Printed via Laser Powder Bed Fusion (opens in a new tab)

  10. The Effects of Laser Shock Peening on the Fatigue Life of Additive Manufactured AlSi10Mg

    … the residual stresses that were created on an AM AlSi10Mg sample from femto-second laser shock peening (LSP). The residual stress was quantified to have a maximum compressive residual stress on the order of 300 MPa and to a depth ~0.5 to 1 mm using the contour method. A simulation was then …

    clemson Repository record for The Effects of Laser Shock Peening on the Fatigue Life of Additive Manufactured AlSi10Mg (opens in a new tab)

  11. Microstructure and Mechanical Properties of Micro-SiCp and Nano-SiCp Reinforced AlSi10Mg Composites Using Spark Plasma Sintering

    AlSi10Mg is a casting alloy commonly used in the automobile and additive manufacturing (AM) industry, such as the vehicle-mounted battery shell. As such its applications in additive manufacturing and casting have been widely studied in recent years. On the other hand, there are limited researches …

    unsw Repository record for Microstructure and Mechanical Properties of Micro-SiCp and Nano-SiCp Reinforced AlSi10Mg Composites Using Spark Plasma Sintering (opens in a new tab)

  12. The Effect of Geometric Defects and Porosity on the Mechanical Behavior of Additively Manufactured SS 316L and AlSi10Mg Components

    … were intentionally manufactured into SS 316L and AlSi10Mg AM tubular tensile specimens to investigate and improve the understanding of the ductility-defect-porosity relationship of AM Metals. SS 316L and AlSi10Mg compression specimens were tested from different build heights and locations on the …

    clemson Repository record for The Effect of Geometric Defects and Porosity on the Mechanical Behavior of Additively Manufactured SS 316L and AlSi10Mg Components (opens in a new tab)

  13. THE EFFECT OF POST PROCESSING ON THE MECHANICAL PROPERTIES AND FRACTURE MECHANISMS OF ALSI10MG PRODUCED THROUGH SELECTIVE LASER MELTING

    The use of selective laser melting for AlSi10Mg has been gaining a lot of popularity, but unfortunately, there are a great deal of issues surrounding internal porosity. Hot isostatic pressing (HIP) has been used in many instances alongside a standard T6 treatment to reduce porosity, but that …

    mcmaster Repository record for THE EFFECT OF POST PROCESSING ON THE MECHANICAL PROPERTIES AND FRACTURE MECHANISMS OF ALSI10MG PRODUCED THROUGH SELECTIVE LASER MELTING (opens in a new tab)

  14. Investigation of material and mechanical properties of Al alloy and Al based MMC parts produced by DMLS for industrial application

    … matrix for producing composites in DMLS process. AlSi10Mg was selected as lightweight alloy and it is similar to an A360 cast alloy in chemical composition. The morphology and size distribution of the AlSi10Mg starting powder was investigated by using Field Emission Scanning Electron Microscope …

    poli-torino Repository record for Investigation of material and mechanical properties of Al alloy and Al based MMC parts produced by DMLS for industrial application (opens in a new tab)

  15. Effet de la température de frittage et du vieillissement artificiel sur la microstructure et les propriétés mécaniques de l’alliage AlSi10Mg

    … ainsi que le comportement mécanique de l’alliage AlSi10Mg avant et après vieillissement artificiel. Des poudres d’aluminium, compactées, ont été frittées sous atmosphère d’azote à 571, 575 et 579 °C, avec des vitesses de chauffage de 0.5 et 3 °C/min, incluant un palier de 2 h à la température de …

    ets-quebec Download PDF for Effet de la température de frittage et du vieillissement artificiel sur la microstructure et les propriétés mécaniques de l’alliage AlSi10Mg (opens in a new tab)

  16. Utilization of Industrial Waste Alloy as An Alternative to Micron-Al in Energetic Applications

    … Here, we report on the feasibility of using AlSi10Mg micron particle, an industrial waste alloy from additive manufacturing with a median diameter of 13 μm, as a promising alternative for aluminum microparticles in propulsion applications. Compared to Al micron particles with a similar …

    waterloo Repository record for Utilization of Industrial Waste Alloy as An Alternative to Micron-Al in Energetic Applications (opens in a new tab)

  17. How to feed and validate a phase-field model predicting the evolution of microstructures and properties in AlSi10Mg processed by Selective Laser Melting

    AlSi10Mg processed by Selective Laser Melting (SLM) exhibits an out-AlSi10Mg processed by Selective Laser Melting (SLM) exhibits an out-of-equilibrium microstructure as a result of rapid solidification. This microstructure is composed of α-Al sub-micron cells surrounded by an eutec- tic mixture of …

    liege Repository record for How to feed and validate a phase-field model predicting the evolution of microstructures and properties in AlSi10Mg processed by Selective Laser Melting (opens in a new tab) Restricted access

  18. Investigation into the Effects of Heat Treatment and Nanoparticles on the Microstructure and Mechanical Properties of LPBF'ed AlSi10MgAlloy

    … manufacturing of aluminum alloys, particularly AlSi10Mg, using Laser Powder Bed Fusion (LPBF). It investigates methods to enhance mechanical properties for industrial applications, focusing on the interplay between process parameters, microstructure, and mechanical behavior. This includes …

    carleton Repository record for Investigation into the Effects of Heat Treatment and Nanoparticles on the Microstructure and Mechanical Properties of LPBF'ed AlSi10MgAlloy (opens in a new tab)

  19. Creep Resistance and Microstructure in Binary Aluminum Cerium Alloy Produced by Laser Powder Bed Fusion

    … alloy for additive manufacturing (AM) is AlSi10Mg, which is not suitable for high temperature applications. Al-Ce based alloys have been shown to be highly printable, cost-efficient alloys. Compared to cast Al-Ce alloys, the eutectic features are refined (<1μm), which give AM Al-10Ce …

    marquette Repository record for Creep Resistance and Microstructure in Binary Aluminum Cerium Alloy Produced by Laser Powder Bed Fusion (opens in a new tab)

Page 1 of 5