Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 35 for “"AlTiN"”.

  1. Coating Development for High-Speed Turning of Stainless Steel Addressing Combined Wear Mechanism

    … for the semi-finish turning of SS304; monolayer AlTiN PVD coatings were investigated for the high-speed and ultra-high-speed turning of SS304 under various cooling conditions. Based on the research, a novel self-adaptive bilayer AlTiN PVD coating was developed and applied for the ultra-high-speed …

    mcmaster Repository record for Coating Development for High-Speed Turning of Stainless Steel Addressing Combined Wear Mechanism (opens in a new tab)

  2. Microdrilling of Nitinol

    … uncoated tungsten carbide tools, as well as with AlTiN/Si3N4 and AlTiN coated tools in minimum quantity lubrication condition. The proper and optimal coatings protected the tool surface and reduced tool wear at higher cutting speeds but were ineffective at lower cutting speeds. Additionally, …

    tamu Repository record for Microdrilling of Nitinol (opens in a new tab)

  3. Ovlivnění základu daně různými způsoby pořízení majetku

    … financování pořízení dlouhodobého majetku firmou Altin JM Group s. r. o. Zkoumá, jak jednotlivé způsoby financování ovlivní základ daně a sleduje také jejich daňové aspekty. Hledá nejvhodnější variantu financování dle firmou zadaných podmínek. Tato varianta by měla mít také co nejlepší dopad na …

    brno-tech Repository record for Ovlivnění základu daně různými způsoby pořízení majetku (opens in a new tab)

  4. Studium povlakovací technologie HIPIMS pro řezné nástroje

    … vlastností stopkových vrtáků s povlakem AlTiN naneseným pomocí technologie HiPIMS. Účelem je charakterizování těchto vlastností a jejich následným porovnáním s vlastnostmi obdrženými u povlaků vytvořených klasickými metodami PVD.

    brno-tech Repository record for Studium povlakovací technologie HIPIMS pro řezné nástroje (opens in a new tab)

  5. Posouzení environmentální zátěže při výrobě otěruvzdorných povlaků magnetronovým naprašováním

    … zátěže výroby dvou druhů povlaků, TiN a AlTiN. Výroba těchto povlaků je popsána, jsou vyhodnoceny dopady na životní prostředí jednotlivých povlaků a tyto výsledky jsou porovnány, aby mohly být učiněny závěry a doporučení.

    brno-tech Repository record for Posouzení environmentální zátěže při výrobě otěruvzdorných povlaků magnetronovým naprašováním (opens in a new tab)

  6. ASSESSMENT OF CORROSION BEHAVIOUR OF MACHINED SUPER DUPLEX STAINLESS STEEL OBTAINED WITH THREE DIFFERENT PVD COATED TOOLS

    … where the tool with best cutting performance, AlTiN, also presented the best electrochemical behaviour. Stress cracking corrosion was found to be associated with residual stresses on the workpiece, among the three tested PVD coated tools the AlCrN/TiSiN showed lowest tensile residual stresses …

    mcmaster Repository record for ASSESSMENT OF CORROSION BEHAVIOUR OF MACHINED SUPER DUPLEX STAINLESS STEEL OBTAINED WITH THREE DIFFERENT PVD COATED TOOLS (opens in a new tab)

  7. Micromilling of Wrought H13 Tool Steel

    … six different coatings --Nano3, Uni+, TiSiNext, AlTiN, TiN, and TiAlN. Line and area surface finish of micromilled channels, and channel width were used as tool evaluating criteria. Scanning electron microscopy observation revealed the similar wear mechanism of coated microtools; the thin coating …

    tamu Repository record for Micromilling of Wrought H13 Tool Steel (opens in a new tab)

  8. Investigation of the High-Speed Finish-Turning of Ti-5Al-5V-5Mo-3Cr Using Novel Mono/Bi-layered PVD-Coated WC Tools

    … in wet conditions. A commercially applied AlTiN-based coating is used as the baseline reference and compared with mono-layered ta-C (diamond-like carbon, DLC), AlCrN, and TiAlSiN coatings applied over the AlTiN base on three different cutting tools. The study focuses on assessing the tool …

    mcmaster Repository record for Investigation of the High-Speed Finish-Turning of Ti-5Al-5V-5Mo-3Cr Using Novel Mono/Bi-layered PVD-Coated WC Tools (opens in a new tab)

  9. Microdrilling of Biocompatible Materials

    … pattern, hole positioning accuracy and effect of AlTiN tool coating are experimentally determined. The experimental data trend agrees with classical Taylor's machining equation. Despite of fragile and long microdrills, the progressive pecking cycle and micromist allowed deep hole drilling on all …

    tamu Repository record for Microdrilling of Biocompatible Materials (opens in a new tab)

  10. Experimental Analysis of Finish Turning of Inconel 617

    … superalloy in finish turning and determined that AlTiN coatings provide the longest tool life. The investigations performed uncovered the relationship between cutting parameters and their influence on the surface integrity and tool life. MQL deposition was tested and found to be comparable and at …

    mcmaster Repository record for Experimental Analysis of Finish Turning of Inconel 617 (opens in a new tab)

  11. Comparison of Structure, Properties and Wear Performance of Coatings Applied by HiPIMS and CAE PVD Deposition Methods During the Machining of Difficult-to-Machine Alloys

    … mechanical and physical properties of AlTiN coatings deposited on carbide tools by HiPIMS and Cathodic Arc Evaporation (CAE) were analyzed when machining Inconel 718 and Stainless Steel 304. Experimental turning tests were performed to evaluate tool life, and the wear mechanisms were …

    mcmaster Repository record for Comparison of Structure, Properties and Wear Performance of Coatings Applied by HiPIMS and CAE PVD Deposition Methods During the Machining of Difficult-to-Machine Alloys (opens in a new tab)

  12. Effects of milling methods, cooling strategies and end-mill coatings on machinability in high speed end-milling of Inconel- 718 using carbide end-mills

    … and tool coatings (Uncoated, AlTiN and GMS<sup>2</sup>) on cutting forces, cutter tooth frequency, tool wear, chip morphology and surface roughness in high-speed end-milling of Inconel-718 to improve its machinability and reduce cost. Firstly, a comparative investigation of …

    must-thes Repository record for Effects of milling methods, cooling strategies and end-mill coatings on machinability in high speed end-milling of Inconel- 718 using carbide end-mills (opens in a new tab)

  13. IMPROMPTU: FROM PUBLISHER'S IMPULSE TO AN ESTABLISHED SMALL­ SCALE GENRE IN PIANO LITERATURE

    … written by Leopold Godowsky, Antonio Bibalo, Altin Volaj, and Nikolay Mazhara. I personally requested the two last named composers to contribute impromptus to this project. My selection represents works by twenty composers and reflects the different types of impromptus that have been …

    maryland Repository record for IMPROMPTU: FROM PUBLISHER'S IMPULSE TO AN ESTABLISHED SMALL­ SCALE GENRE IN PIANO LITERATURE (opens in a new tab)

  14. Investigation of the adhesion behavior of aluminum on various PVD coatings applied to H13 tool steel to minimize or eliminate lubrication during high pressure die casting, An

    … that had no adhesion strength (e.g., AlCrN, AlTiN and CrWN), (2) reactive metals (e.g. chromium) that either dissolve into the liquid aluminum or react to form intermetallics, (3) those with surface properties that result in nanoscale mechanical interlocking that result in the highest …

    colo-mines Repository record for Investigation of the adhesion behavior of aluminum on various PVD coatings applied to H13 tool steel to minimize or eliminate lubrication during high pressure die casting, An (opens in a new tab)

  15. Surface Finish Modeling in Micromilling of Biocompatible Materials

    … edge. The build-up-edge was reduced when using AlTiN coated tools and milling in minimum quantity lubrication. The empirical surface roughness model obtained in this study shows the dependence of surface finish on chip load in micromilling. In order to further enhance the surface finish of …

    tamu Repository record for Surface Finish Modeling in Micromilling of Biocompatible Materials (opens in a new tab)

  16. ION, OPERA IN SEVEN SCENES, BASED ON EURIPIDES ORIGINAL PLAY

    The opera ION serves as my Doctoral Dissertation at the University of Maryland School of Music. The librettist of the opera is Nick Olcott, Opera Assistant Director at the University. My interest in this little-known play of Euripides began with my work with Professor Lillian Doherty of the …

    maryland Repository record for ION, OPERA IN SEVEN SCENES, BASED ON EURIPIDES ORIGINAL PLAY (opens in a new tab)

  17. Rationalizing everyday life in late nineteenth century Istanbul c. 1900

    This dissertation explores the rationalizing process of everyday life in late nineteenth century Istanbul, within the framework of the modernization agendas that swept the Ottoman Empire from the 1830s on. Starting with the period known as Tanzimat (literally 'the reforms'), the study covers the …

    njit Repository record for Rationalizing everyday life in late nineteenth century Istanbul c. 1900 (opens in a new tab)

  18. Charred Chronicles: People’s Perceived Experiences of Landscape, Attachment, and Recovery After Wildfires

    Wildfires intensified by climate change jeopardize not only physical infrastructure but also the emotional scaffolding that ties people to place. On 30 June 2021 the Lytton Creek Fire in British Columbia destroyed 90 percent of the village, displacing more than one thousand residents and leaving …

    calgary Repository record for Charred Chronicles: People’s Perceived Experiences of Landscape, Attachment, and Recovery After Wildfires (opens in a new tab)

Page 1 of 2