Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 148 for “"Alkalis"”.

  1. Chemical enhanced oil recovery utilizing alternative alkalis

    … crude oil recovery at 55oC and 100oC. The alkalis studied were sodium metaborate, pH of 10-10.5, and a sodium silicate/borax mixture, pH of 11. Sodium metaborate showed very optimistic results similar to sodium carbonate studies. Sodium metaborate ASP floods recovered 97-99% of residual oil …

    texas Repository record for Chemical enhanced oil recovery utilizing alternative alkalis (opens in a new tab)

  2. Effect of Alkalis and Sulfate on Portland Cement Systems

    The effect of the sulfates and alkalis on the durability of Portland cement systems was investigated through a series of cube and prism mixes. Durability was assessed using expansion of mortar prisms and the compressive strength of mortar cubes. The study covered a large range of both alkali and …

    usf Repository record for Effect of Alkalis and Sulfate on Portland Cement Systems (opens in a new tab)

  3. NANOSTRUCTURED MATERIALS FOR ALKALIS ION BATTERIES AND THEIR MECHANISTIC STUDIES

    To be comparable with combustion engine and practical for large-scale applications in smart grids, the energy density and the rate capability of LIBs and SIBs must be improved, which urges the exploitation of novel composite cathode or anode materials high specific capacity, high rate capability, …

    nus Repository record for NANOSTRUCTURED MATERIALS FOR ALKALIS ION BATTERIES AND THEIR MECHANISTIC STUDIES (opens in a new tab) Download file for NANOSTRUCTURED MATERIALS FOR ALKALIS ION BATTERIES AND THEIR MECHANISTIC STUDIES (opens in a new tab)

  4. Laser Ionisation Spectroscopy of Alkalis: Applications to Resonance Ionisation Mass Spectrometry

    Resonance ionisation spectroscopy (RIS) at Glasgow University began as a result of the need to calibrate large gas-filled multiwire proportional counters (MWPCs) currently being built at CERN, specifically the ALEPH time projection chamber. From this work the direction shifted towards the …

    glasgow Download PDF for Laser Ionisation Spectroscopy of Alkalis: Applications to Resonance Ionisation Mass Spectrometry (opens in a new tab)

  5. Experimental development of a chemical flood and the geochemistry of novel alkalis

    … Secondly, this thesis investigates two novel alkalis that are compatible with free calcium ions, sodium acetate and tetrasodium EDTA, for their viability for use in ASP floods for reservoirs containing anhydrite or gypsum.

    texas Repository record for Experimental development of a chemical flood and the geochemistry of novel alkalis (opens in a new tab)

  6. Available alkalis in fly ash and their effects on alkali-aggregate reaction

    <p>The available alkalis of four Class C and two Class F fly ashes were evaluated according to ASTM C 311. The effects of alkalis in three Class C fly ashes on expansion of mortar bars with high and low-alkali cements were studied using the procedures described in ASTM C 441. The purpose of this …

    iastate Repository record for Available alkalis in fly ash and their effects on alkali-aggregate reaction (opens in a new tab)

  7. Outer-core emission spectroscopy of the heavy alkalis and alkali-alkali metal alloys

    … both as pure metals and as impurities in other alkalis, increases strongly with the observed emission band width. A dependence of the Auger matrix element on band width is the likely cause."

    uiuc Repository record for Outer-core emission spectroscopy of the heavy alkalis and alkali-alkali metal alloys (opens in a new tab)

  8. Surface reflectance core spectroscopy of halogens, rare gases, alkalis and CO on metal surfaces

    Submitted by Carolyn Mead (cmead2@illinois.edu) on 2011-06-28T15:03:36Z No. of bitstreams: 1 1980_cunningham.pdf: 5039429 bytes, checksum: 6a907df332d48a6816d0e9530d260918 (MD5)

    uiuc Repository record for Surface reflectance core spectroscopy of halogens, rare gases, alkalis and CO on metal surfaces (opens in a new tab)

  9. Mechanochemical activation of supplementary cementitious materials through the intergrinding of impure kaolinitic clay and alkalis

    … basis, clays mechanochemically activated without alkalis were found to be the most pozzolanic, followed by clays interground with sodium silicate, calcined clay, and clays interground with soda-lime waste glass powder. However, on a per gram of clay basis, clays interground with sodium silicate …

    texas Repository record for Mechanochemical activation of supplementary cementitious materials through the intergrinding of impure kaolinitic clay and alkalis (opens in a new tab)

  10. Surface Reflectance Core Spectroscopy of Halogens, Rare Gases, Alkalis and Carbon-Monoxide on Metal Surfaces

    … spectra for the halogens, rare gases, alkalis and the CO molecule adsorbed on metal and insulating surfaces are described. This research employed synchrotron radiation in the energy range from 4 to 20 eV, using both s and p polarized light. Results for adsorbates in three neighboring …

    uiuc Repository record for Surface Reflectance Core Spectroscopy of Halogens, Rare Gases, Alkalis and Carbon-Monoxide on Metal Surfaces (opens in a new tab)

  11. Removal of Sulfur Dioxide and Nitric Oxide From a Flue Gas Stream By Two Sodium Alkalis of Various Sizes

    <p>The primary purpose of this research effort was to examine the dry removal of SO<sub>2</sub> and NO from a flue gas stream by injecting two sodium additives into a pilot bag house system. The additives tested were NaHCO<sub>3</sub> and Na<sub>2</sub>CO<sub>3</sub> dusts with mass mean diameters …

    ut-knoxville Repository record for Removal of Sulfur Dioxide and Nitric Oxide From a Flue Gas Stream By Two Sodium Alkalis of Various Sizes (opens in a new tab)

  12. Application of different types of solvents for heavy oil recovery : experimental study on dimethyl ether, organic alkalis, and surface active solvents

    … recovery, such as dimethyl ether (DME), organic alkalis, and surface active solvents (SAS), as a potential additive to the injection fluid. These solvents are not conventionally used for enhanced oil recovery (EOR). The first part of the dissertation presents potential methods of improving the …

    texas Repository record for Application of different types of solvents for heavy oil recovery : experimental study on dimethyl ether, organic alkalis, and surface active solvents (opens in a new tab)

  13. The action of barium hydroxide on certain of the monobasic sugar acids

    … in the last thirty years on the action of alkalis upon sugars, very little has been done to determine the effect of alkalis upon the corresponding sugar acids, and many times it was tacitly assumed that the acids would be relatively stable if they were formed during the degradation of …

    nebraska Repository record for The action of barium hydroxide on certain of the monobasic sugar acids (opens in a new tab)

  14. Fat extraction from mechanically deboned beef with various pH and alkalis : a thesis presented in fulfilment of the requirements for the degree of Master of Technology at Massey University

    The study showed that meat surimi with a 1.3% fat content could be prepared from mechanically deboned beef. The process used in the laboratory to prepare the meat surimi was a relatively simple process requiring few unit operations, unit operations which are already used for the manufacture of fish …

    massey Repository record for Fat extraction from mechanically deboned beef with various pH and alkalis : a thesis presented in fulfilment of the requirements for the degree of Master of Technology at Massey University (opens in a new tab)

  15. Evaluation of test methods and specifications for supplementary cementitious materials for concrete

    … C311 standard method for determining available alkalis were explored by evaluating modifications to the standard available alkali test method that included varying the length of curing and increasing the pH of the reagent solution to better represent conditions in real concrete. The results of …

    texas Repository record for Evaluation of test methods and specifications for supplementary cementitious materials for concrete (opens in a new tab)

  16. Thermochemical Conversion of Biomass: Acid Catalysed Pathways and Kinetics of Cellulose Pyrolysis

    … quantitative and kinetic effects of acids and alkalis on the yield of anhydrosaccharides. The extent of cellulose conversion via beta-elimination depends on the amount and strength of acid infused within the cellulose matrix. However, the beta-elimination route could also be …

    nus Repository record for Thermochemical Conversion of Biomass: Acid Catalysed Pathways and Kinetics of Cellulose Pyrolysis (opens in a new tab) Download file for Thermochemical Conversion of Biomass: Acid Catalysed Pathways and Kinetics of Cellulose Pyrolysis (opens in a new tab)

  17. The susceptibility of various UK aggregates to alkali silica reaction

    … suite was derived from ASR caused by the initial alkalis in a concrete mix and was identical to ASR gels derived from the various concretes when immersed in distilled water. The second suite was developed by alkalis derived from a reaction between NaCl and the C3A component of the cement paste. It …

    aston Download PDF for The susceptibility of various UK aggregates to alkali silica reaction (opens in a new tab)

  18. Characterization of fly ash for evaluating the alkali-silica reaction resistance of concrete

    … the ability for the hydration products to bind alkalis. This prevents the availability of these alkalis for ASR. This project aims to characterize fly ash in a way that best predicts how it will perform in concrete with an emphasis on ASR. Fly ashes with a variety of chemical compositions were …

    texas Repository record for Characterization of fly ash for evaluating the alkali-silica reaction resistance of concrete (opens in a new tab)

Page 1 of 8