Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 259 for “"Alloy composition"”.

  1. Effect of Alloy Composition on the Hot Deformation Behavior, Extrudability and Mechanical Properties of AA6XXX Aluminum Alloys

    … in the application of high specific strength alloys such as the AA6xxx aluminum alloys. In the near term, light weighting of vehicles through the use of high strength aluminum alloys is one solution to improve fuel efficiency. This research was performed to help understand the extrudability of …

    waterloo Repository record for Effect of Alloy Composition on the Hot Deformation Behavior, Extrudability and Mechanical Properties of AA6XXX Aluminum Alloys (opens in a new tab)

  2. Influence of base alloy composition on processing time during transient liquid phase bonding of nickel-base superalloys

    … to study the influence of base metal composition on the time required to achieve complete isothermal solidification (tf) during TLP bonding of three Ni-base superalloys was performed. Alloys IN 738, DS Rene80 and DS IC 6 show similar behaviour when bonded at 1100 oC, with comparable …

    manitoba Repository record for Influence of base alloy composition on processing time during transient liquid phase bonding of nickel-base superalloys (opens in a new tab)

  3. Effect of Alloy Composition, Free Volume and Glass Formability on the Corrosion Behavior of Bulk Metallic Glasses

    … and mechanisms. Presence of Nb in Zr-based alloys was found to significantly improve corrosion resistance due to the formation of a stable passive oxide. Relaxed glasses showed lower rates compared to the as-cast alloys. This was attributed to lowering of chemical potential from the reduced …

    unt Repository record for Effect of Alloy Composition, Free Volume and Glass Formability on the Corrosion Behavior of Bulk Metallic Glasses (opens in a new tab)

  4. Development of atomization gas and alloy composition for gas atomization reaction synthesis of oxide dispersion strengthened ferritic alloys

    … oxide dispersion strengthened (ODS) ferritic alloys are strong candidates for such applications. While mechanical alloying (MA) has been the traditional method of producing ODS alloys, gas atomization reaction synthesis (GARS) produces a cleaner feedstock of powders with Cr-enriched surface …

    iastate Repository record for Development of atomization gas and alloy composition for gas atomization reaction synthesis of oxide dispersion strengthened ferritic alloys (opens in a new tab)

  5. The influence of alloy composition and thermo-mechanical processing procedure on microstructure and mechanical properties of high-magnesium aluminum-magnesium alloys

    … procedure to process Aluminum- Magnesium alloys and testing effects of alloying additions on these alloys. Magnesium contents of eight and ten weight percent and the alloying effects of copper and manganese were studied. Microstructures and mechanical properties at six warm rolling …

    nps Repository record for The influence of alloy composition and thermo-mechanical processing procedure on microstructure and mechanical properties of high-magnesium aluminum-magnesium alloys (opens in a new tab)

  6. The Growth of Copper - Chromium Metastable Alloys by Bias Sputtering: Effect of Substrate Bias and Alloy Composition on Solubility and Morphology

    Cu-Cr metastable alloys are interesting both from a basic science viewpoint (i.e., alloy theory for elements with very limited mutual liquid and solid solubilities) and from a technological viewpoint (i.e., "stainless" copper for corrosion and thin film circuit fabrications). Single phase Cu-Cr …

    uiuc Repository record for The Growth of Copper - Chromium Metastable Alloys by Bias Sputtering: Effect of Substrate Bias and Alloy Composition on Solubility and Morphology (opens in a new tab)

  7. Characterization of Structural Evolution as a Function of Alloy Composition, Strain Rate, and Heat Input for Precipitation Strengthened Aluminum Alloys Processed via Additive Friction Stir Deposition

    Precipitation strengthened aluminum alloys have been identified for their use in a wide range of aerospace and structural applications due to the excellent strength-to-weight ratio these alloys exhibit. However, these alloys experience significant challenges due to cracking caused by solidification …

    alabama Repository record for Characterization of Structural Evolution as a Function of Alloy Composition, Strain Rate, and Heat Input for Precipitation Strengthened Aluminum Alloys Processed via Additive Friction Stir Deposition (opens in a new tab)

  8. Electrodeposition of NiFe 3-D microstructures

    … microactuators. In these applications, the compositional structure of the NiFe deposit has a great impact on device performance. Thus, control of alloy composition during deposition is an important processing challenge. In this study, we report on the development of an electrodeposition …

    washington Repository record for Electrodeposition of NiFe 3-D microstructures (opens in a new tab)

  9. Inverse segregation in Al-Cu alloys

    … in unidirectionally cast ingots as a function of alloy composition and casting conditions. Chill face segregation and the extent of segregation adjacent to the chill face has been examined in the Al-Cu and the Al-Ag systems, using radioactive copper (Cu64) and radioactive silver (Ag110) to measure …

    ubc Repository record for Inverse segregation in Al-Cu alloys (opens in a new tab) Download PDF for Inverse segregation in Al-Cu alloys (opens in a new tab)

  10. Nickel-based single crystal superalloys for industrial gas turbines

    … four prototype single crystal nickel-based superalloys for industrial gas turbine applications is studied. All contain greater quantities of Cr than in most existing single crystal superalloys; two are alloyed with Si, one with Re. To explain the results, the factors known to influence the rate …

    birmingham Download PDF for Nickel-based single crystal superalloys for industrial gas turbines (opens in a new tab)

  11. Impact Ionisation in Wide Band-Gap III-V Quaternary Alloys

    … of the characteristics of two III-V quaternary alloy systems, (AlxGa1-x)0.52In0.48P and AlxGa1-xAs0.56Sb0.44. These materials are studied primarily for their application as multiplication regions in SACM avalanche photodiodes for the detection of SWIR wavelengths. The impact ionisation …

    whiterose Download PDF for Impact Ionisation in Wide Band-Gap III-V Quaternary Alloys (opens in a new tab)

  12. Hydrogen and water vapour effects on oxygen solubility and diffusivity in high temperature Fe-Ni alloys

    … oxygen solubility and diffusivity, in the base alloy is required. The objective of this study is to measure the permeability, solubility and diffusivity of oxygen in Fe-Ni alloys at temperatures above 1,000&degC. In order to obtain the best results, the formation of an external oxide layer …

    unsw Repository record for Hydrogen and water vapour effects on oxygen solubility and diffusivity in high temperature Fe-Ni alloys (opens in a new tab)

  13. An x-ray study of the structure of K1-xRbxCy

    … and K1-xRbxC24 represent quasi two-dimensional alloys interleaved by graphite hexagonal planes. We report extensive x-ray scattering investigations of the structural aspects of these compounds. In stage 1 K1-xRbxC8, we find that the interlayer separation exhibits a slight deviation from …

    uiuc Repository record for An x-ray study of the structure of K1-xRbxCy (opens in a new tab)

  14. Solidification cracking resistance of high strength aluminum alloys

    … in the manufacture of high strength aluminum alloys uneven cooling rates at different parts of the ingot cause thermal stresses. Due to these thermal stresses, cracks are initiated at the startup stage which may propagate as the stress elevates. Hence the evaluation of fracture toughness …

    wvu Repository record for Solidification cracking resistance of high strength aluminum alloys (opens in a new tab)

Page 1 of 13