Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 1478 for “"Alloying"”.
-
Scanning Probe Alloying Nanolithography (SPAN)
… The new technique is called the Scanning Probe Alloying Nanolithography (SPAN). The SPAN was processed using an Atomic Force Microscope (AFM) in ambient environment. Firstly, an AFM probe was coated with gold (Au), and then slid on a silicon (Si) substrate. The contact-sliding motion generated a …
-
ALLOYING OF THIN-WALL DUCTILE IRON CASTINGS
… This study evaluates improvements resulting in alloying of thin wall ductile iron castings. Two, three, four and six-millimeter-thick sections were cast in chemically bonded sand molds and evaluated by optical microscopy, ultrasonic modulus, Brinell hardness and tensile testing. Increasing …
-
Cation doping/alloying in kesterite solar cells
… Li) to the kesterite matrix (so-called doping/alloying strategy) for improving the electronic properties of CZTSSe solar cells. First, the substitution of Cu by Ag for CZTSSe absorbers has been achieved by annealing Ag contained precursor. The formation mechanism of Ag alloyed CZTSSe has been …
-
Studies on polymer alloying using reactive extrusion
Thesis (M. S.)--Michigan State University. Department of Chemical Engineering, 1997
-
An improved gas nozzle for laser surface alloying
… field surrounding the molten metal during laser alloying. In addition, an objective of this project was to design a protective gas nozzle system for laser alloying that would control the entrainment of the outside gas, provide a gentle pressure to the molten metal and not adversely effect the …
-
Three Dimensional Digital Alloying with Reactive Metal Inks
3D printing of multifunctional components using two or more materials is a rapidly growing area of research. Metallic alloy inks have been used with various 3D printing techniques to create functional components such as antennas, inductors, resistors, and biocompatible implants. Most of these …
-
Mixed metal oxide nanowires via solid state alloying.
… control. In this dissertation, solid state alloying of binary oxide nanowires with solid and liquid precursors is studied to obtain mixed metal oxide nanowires. Solid state alloying studies were conducted using either solid precursors of hydroxides or liquid precursor of nitrates mixed with …
-
Synthesis of nanostructured titanium based intermetallics by mechanical alloying
… TiAl, TiN, and Al-TiN composites via mechanical alloying were investigated.Nanocrystalline Al3Ti was successfully fabricated by MA. The interfacial reactions, phase and grain size evolution, both during MA and subsequent heat-treatment were studied in detail. Mechanisms were proposed to explain …
-
Consolidation of WC-Co nanocomposites synthesised by mechanical alloying
The influence of mechanical alloying (MA) milling time, temperature, sintering method and microstructure on the mechanical properties of a tungsten carbide-cobalt (WC-Co) hardmetal, based on 10wt% Co, has been established. The effects of high-energy milling for 30, 60, 180 and 300 min and the …
-
Development of TiA1-based alloys using suspended droplet alloying
… synthesis method, Suspended Droplet Alloying (SDA), has been developed for the rapid production of small, bulk alloy samples for the large EU FP7 collaborative project, Accelerated Metallurgy. SDA can produce a discrete mm-sized fully dense alloy button with precise stoichiometry in …
-
Anion alloying of III-V semiconductors for water splitting.
… a band gap reduction discontinuity at such a low alloying levels. The most significant accomplishments of this work are the demonstration of anion substitution control in the growth of GaSbzP1-z alloys through HVPE and the demonstration of visible light absorbing GaSbxN1-x and GaBiyN1-y nanowires …
-
In Situ Alloying of Titanium via Laser Powder Bed Fusion
… addresses these challenges through in-situ alloying strategies that use mixed elemental or composite feedstocks to enable novel Ti-based alloy development directly during LPBF processing. The first stage of this work investigates a binary Ti–2.9Cu alloy fabricated from blended Ti and Cu …
-
First-Principles Investigation of Doping and Alloying of β-Ga2O3
… improving the thermal properties of β-Ga2O3 by alloying with the lightest Group-13 cation, B. We find that doping with Bi creates mid-gap states derived from the Bi 6s electrons at similar energy level to candidate acceptors through an anti-bonding hybridization of the Bi lone pair with the O 2p …
-
Alloying-induced softening in metal nanowires studied by atomistic simulations
… the mechanical properties of metal nanowires, alloying is believed to be an effective pathway by adding solute atoms into the host matrix during the fabrication process. In this project, the alloying effects on the mechanical properties and yield mechanisms of metal nanowires have been studied …
-
Polymer blends formed by the solid state mechanical alloying process
… This novel technique, called Mechanical Alloying (MA), involves the repeated welding, working hardening, and fracture of metallic powders to form an alloy. The research presented in this thesis describes the use of the MA process to form polymer blends. Until recently there has been no …
-
An investigation of alloying effects in aluminum dispersion strengthened with A1
… investigation was to determine the effects of alloying elements on the mechanical properties of aluminum dispersion strengthened by its own oxide, commonly referred to as sintered aluminum product (SAP). SAP is noted for its high strength at elevated temperatures compared to conventional …
-
Additive Manufacturing of Aluminium-Metal Matrix Composite developed through Mechanical Alloying
… investigates the suitability of the mechanical alloying as a novel method of producing feedstock material for the LM process. This research further explores the interaction of the composite powders with the laser until suitable process parameters were obtained. Furthermore, the fractography, …
-
The Influence of Alloying Additions on Diffusion and Strengthening of Magnesium
… where reduced weight is a primary motivator. Alloying can enhance the properties of magnesium without significantly affecting its density. Essential to alloy development, inclusive of processing parameters, is knowledge of thermodynamic, kinetic, and mechanical behavior of the alloy and its …
Page 1 of 74