Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 82 for “"Alloying Additions"”.

  1. The Influence of Alloying Additions on Diffusion and Strengthening of Magnesium

    … where reduced weight is a primary motivator. Alloying can enhance the properties of magnesium without significantly affecting its density. Essential to alloy development, inclusive of processing parameters, is knowledge of thermodynamic, kinetic, and mechanical behavior of the alloy and its …

    ucf Repository record for The Influence of Alloying Additions on Diffusion and Strengthening of Magnesium (opens in a new tab)

  2. Effect of Alloying Additions on Austenite Refinement in Nickel-Alloyed Ductile Cast Irons

    … This research investigates the impact of in-mold additions of different alloying elements on the austenite morphology and grain refinement of nickel-alloyed ductile iron along with the associated mechanical properties. A hypoeutectic alloy with primary austenite phase was designed using …

    gsu Repository record for Effect of Alloying Additions on Austenite Refinement in Nickel-Alloyed Ductile Cast Irons (opens in a new tab)

  3. The effects of ternary alloying additions on solute-drag creep in Al-Mg alloys

    Effects of ternary additions of Zn, Fe, and Cu on solute-drag creep and duc tility in Al-Mg alloys are studied. The materials studied are, in wt. pct., Al 2Mg-5Zn, Al-3Mg-5Zn, Al-4Mg-5Zn, Al-3Mg-0.11Fe, Al-3Mg-0.27Fe, Al-3Mg 0.40Fe, Al-3Mg-0.50Cu, Al-3Mg-1.02Cu, Al-3Mg-1.52Cu, and Al-3Mg-2.15Cu. …

    texas Repository record for The effects of ternary alloying additions on solute-drag creep in Al-Mg alloys (opens in a new tab) Restricted access

  4. Effect of alloying additions on corrosion behavior of nickel-molybdenum alloys in fused fluoride mixtures.

    … indicated the corrosion susceptibility of alloying additions to increase in this order: Fe, Nb, V, Cr, W, Ti, and Al. However, metallographic examinations of loop surfaces showed relatively light attack for all alloys except those containing combined additions of Al and Ti or Al and Cr. A …

    ut-knoxville Repository record for Effect of alloying additions on corrosion behavior of nickel-molybdenum alloys in fused fluoride mixtures. (opens in a new tab)

  5. Effect of alloying additions of aluminium and iron on the creep resistance of Ti-12Cr (wt.%)

    ABSTRACTEFFECT OF ALLOYING ADDITIONS OF ALUMINIUM AND IRON ON THE CREEPRESISTANCE OF TI-12CR (WT.%)ByHarish Narasimhan ChakravartyTitanium (Ti) and its alloys are among the desired materials for biomaterial, marine, and aerospace applications due to their excellent properties. Metastable beta …

    msu Repository record for Effect of alloying additions of aluminium and iron on the creep resistance of Ti-12Cr (wt.%) (opens in a new tab)

  6. Influence of processing parameters and alloying additions on the mechanically determined no-recrystallization temperature In niobium microalloyed steels

    Microalloying elements are added to plate steels to improve the mechanical properties through grain refinement and precipitation strengthening. In industrial practice, such refinement is obtained by controlling the rolling near critical temperatures in austenite. Generally, a large amount of hot …

    colo-mines Repository record for Influence of processing parameters and alloying additions on the mechanically determined no-recrystallization temperature In niobium microalloyed steels (opens in a new tab)

  7. Effect of Alloying Additions and Heat Treatment on Localized Corrosion Susceptibilities of AA7xxx Alloys Grain Refined with Al-5Ti-1B Master Aloy

    … of this research was to identify the effect of alloying additions and heat treatment on the localized corrosion mechanisms of AA7xxx alloys that have been grain refined with an Al-5Ti-1B master alloy. The major alloying elements, Zn (3.5 – 6.5 wt. %), Mg (1.5 – 2.5 wt.%), Cu (0 – 3 wt. %), and …

    mcmaster Repository record for Effect of Alloying Additions and Heat Treatment on Localized Corrosion Susceptibilities of AA7xxx Alloys Grain Refined with Al-5Ti-1B Master Aloy (opens in a new tab)

  8. Crystal structure, microstructure and magnetic properties of rapidly solidified samarium-cobalt based alloys

    … binary alloy systems modified with Nb and C additions. Melt spinning at 40 m/s resulted in the formation of the metastable TbCu7-type structure in all instances regardless of alloying additions. While the unalloyed Sm12Co88 alloy displayed a coercivity of 0.5 kOe, alloying additions resulted …

    nebraska Repository record for Crystal structure, microstructure and magnetic properties of rapidly solidified samarium-cobalt based alloys (opens in a new tab)

  9. Development of corrosion resistant galvanising alloys

    In this work an investigation into the effect of alloying additions (Mn, Cu, Sb and Zr) on microstructure and corrosion of Zn alloys and hot dip galvanised coatings was undertaken. The first part of this thesis focuses on the effect of alloying additions on the corrosion of Zn alloys. The result …

    birmingham Download PDF for Development of corrosion resistant galvanising alloys (opens in a new tab)

  10. Phase Stability In Cobalt-Based L12 Quaternary Intermetallics From Density Functional Theory

    The effects of higher order alloying additions (Mo, Ti, Ta, Hf, Fe, V) on the phase stability of L12 (γ’) intermetallics have been studied via first-principles. A 32 atom special-quasi-random structure was used to mimic the experimentally observed solid solution sublattice. Density of states …

    mississippi Repository record for Phase Stability In Cobalt-Based L12 Quaternary Intermetallics From Density Functional Theory (opens in a new tab)

  11. Factors affecting the constitution and stability of iron-base austenitic alloys.

    … + sigma phase. The effect of fourth element additions namely:- (Mn,Cu,C,N, Si,Mo,Nb and Ti) which are known austenite or delta ferrlte/sigma phase formers have been investigated. The constitutional effects of the fourth element additions have been quantified by the determination of nickel and …

    sheffield-hallam Download PDF for Factors affecting the constitution and stability of iron-base austenitic alloys. (opens in a new tab)

  12. First Principles Study of the Effect of Local Bonding on Diffusion Mechanisms in Alloys

    … engineering stiffer directional bonds via micro-alloying additions in Mg is a promising route to dramatically improve their high temperature creep response. The second part of my work investigates the effects of Si, P, and S solutes on H interstitial diffusion mechanism in Ni. It examines how H …

    unt Repository record for First Principles Study of the Effect of Local Bonding on Diffusion Mechanisms in Alloys (opens in a new tab)

  13. THE EFFECT OF MICROALLOY ADDITIONS AND LASER TREATMENT ON THE WEAR AND CORROSION BEHAVIOUR OF CHROMIUM CAST IRON

    THE INFLUENCE OF STRONG CARBIDE-FORMING ADDITIONS (NB, TI, W) ON THE WEAR RESISTANCE OF CHROMIUM BEARING CAST IRONS (WITH 11-12 WT PERCENT CR), SUBJECTED TO A CO2-LASER TREATMENT, IS EXAMINED. DIFFERENT POWER OUTPUTS OF THE LASER BEAM WERE USED, COMBINED TO DIFFERENT SCANNING VELOCITIES. THE …

    greece Repository record for THE EFFECT OF MICROALLOY ADDITIONS AND LASER TREATMENT ON THE WEAR AND CORROSION BEHAVIOUR OF CHROMIUM CAST IRON (opens in a new tab)

  14. The High temperature properties of Fe-Ni-Cr alloys.

    … presented concerning the influence of the common alloying additions in Austenitic Stainless Steels and Ni-Fe Base Superalloys on their grain coarsening characteristics, precipitation hardening and recrystallization behaviour. The effects of various microstructural features on the high temperature …

    sheffield-hallam Download PDF for The High temperature properties of Fe-Ni-Cr alloys. (opens in a new tab)

  15. The influence of alloy composition and thermo-mechanical processing procedure on microstructure and mechanical properties of high-magnesium aluminum-magnesium alloys

    … Magnesium alloys and testing effects of alloying additions on these alloys. Magnesium contents of eight and ten weight percent and the alloying effects of copper and manganese were studied. Microstructures and mechanical properties at six warm rolling temperatures located above and below …

    nps Repository record for The influence of alloy composition and thermo-mechanical processing procedure on microstructure and mechanical properties of high-magnesium aluminum-magnesium alloys (opens in a new tab)

  16. Use of cellular automata-based methods for understanding material-process-microstructure relations in alloy-based additive processes

    … to guide future experiments towards sets of alloying additions and deposition conditions that produce preferred microstructures. Cellular Automata (CA) based modeling techniques provide a way to bridge the scales of the complex phenomena that occur during AM processes, reducing them to …

    iastate Repository record for Use of cellular automata-based methods for understanding material-process-microstructure relations in alloy-based additive processes (opens in a new tab)

Page 1 of 5