Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 363 for “"Alloying elements"”.
-
Study on segregation behavior of alloying elements in titanium alloys during solidification
… study was conducted on segregation behavior of alloying elements in titanium alloys to clarify the formation mechanism of "beta-flecks", melt-related defects enriched in beta stabilizing elements, which can cause a decrease in mechanical performance. Commercial titanium alloys, which are prone …
-
Modeling of Effect of Alloying Elements on Radiation Damage in Metallic Alloys
… dynamics simulations were conducted to study the alloying element effects on the primary damage in Fe-based alloys, including defect production and dislocation loop transformations, and their connections with defect thermodynamics. First, effects of alloying elements on the primary damage in three …
-
The effect of alloying elements on creep behaviour with particular reference to steel
… from a different angle. The effect of individual alloying elements was thus Investigated by carrying out true stress-true strain tensile tests on various steels over a range of temperature(3,5). It was found that, with a simple iron-carbon alloy, a maximum in stress was obtained at about 200
-
Effects of alloying elements upon austenite decomposition in high strength low alloy steels
… was explained by synergistic interactions among alloying elements. The paraequilibrium model was applied to calculate the metastable fraction of ferrite in each alloy. This fraction was shown to coincide with cessation of transformation in the Mo alloy transformed at 600°C. Transformation stasis …
-
Effect of Alloying Elements on the Microstructure and Mechanical Properties of Magnesium-Zinc Alloys
… a pronounced age hardening response; and many alloying elements have been added into the system to improve its mechanical performance. However, the application of Mg-Zn alloys is still limited due to the high cost of rare earth alloying elements and processing technologies. Therefore, it has …
-
EFFECTS AND LIMITATIONS OF RESIDUAL ALLOYING ELEMENTS IN SILICON SOLID SOLUTION STRENGTHENED FERRITIC DUCTILE IRON
… need to reduce the amount of pearlite promoting elements, particularly copper and manganese, which are used in traditional grades. Knowing the acceptable threshold of residual alloying elements will allow for more cost-effective tailoring of the charge stream. Data were generated from a series of …
-
Influence of alloying elements, testing solution and surface roughness on corrosion behaviour of stainless steel reinforcing bars
… for their high cost is the price of their major alloying elements. Therefore, the contributions of these elements towards passive film properties, pitting corrosion resistance, critical chloride threshold (CCRIT) values and overall corrosion performance in the presence of deleterious species in …
-
Effect of microstructure and alloying elements on the resistance of fastener grade steels to hydrogen assisted cracking
… caused a deleterious effect but all other alloying elements studied did not cause much change in hydrogen assisted cracking susceptibility.
-
Effects of Water Vapour and Alloying Elements on High-Temperature Oxidation of Ferritic and Austenitic Chromia-forming Alloys
… oxidation. However, the effect of minor alloy elements on oxidation behaviour of chromia-forming alloys in water vapour is still unclear. This work investigated the oxidation behaviour of ferritic/austenitic Fe-Cr based alloys and alloys doped with 1 Si, 2Mn, 1Ti, and 0.1Ce (all in wt.%) in …
-
Effects of alloying elements on the microstructure and fatigue properties of cast iron for internal combustion engine exhaust manifolds
<p>In the design of exhaust manifolds for internal combustion engines the materials used must exhibit resistance to corrosion at high temperatures while maintaining a stable microstructure. Cast iron has been used for manifolds for many years by auto manufacturers due to a combination of suitable …
-
Effects of Water Vapour and Alloying Elements on Oxidation Behaviours of Ni-based Chromia-forming Alloys at High Temperature
… at 650°C and 750°C. The effects of minor alloying elements (Si, Fe, Al, Mn, Ta, Ce, Ti) on Ni-20Cr alloys were also examined. At 650°C, Ni-10Cr, Ni-20Cr, Ni-30Cr experienced breakaway oxidation in Ar-5H2O. Increasing water vapour content led to a slight reduction in weight gain rate. At …
-
The effects of alloying elements and thermal history of microstructure and hot cracking resistance of austenitic stainless steel weld metals
… research was to investigate the influence of the alloying elements and multiple thermal cycling on the hot cracking resistance of austenitic stainless steel weld metals. In addition, the effect of composition and multiple thermal cycling on the hot ductility was also determined and correlated with …
-
Influence of selected alloying elements and starting microstructure on Zn-assisted liquid metal embrittlement susceptibility of advanced high strength steels
… that Si in the AHSS substrate suppresses Fe-Zn alloying reactions and retards the nucleation and growth of intermetallic phases at the coating-substrate interface. Elemental characterization using scanning-TEM energy dispersive spectroscopy (STEM-EDS) and time-of-flight secondary-ion-mass …
-
Studies on Thermodynamic Considrations and Effects of Alloying Elements upon Carburization, Coking, and Metal Dusting for Fe-Ni-Cr Alloys
This doctoral thesis is related to the following articles:
-
Surface treatment of cast iron by adding different alloying elements to form metallic glass structure layer using an industrial carbon dioxide laser
… different mixing ratios of the aforementioned alloying elements as well as four different groove sizes on the surfaces of the samples were used. Determination of the characteristics of the laser-formed layers on the surfaces of the samples were conducted by the utilization of x-ray diffraction …
-
Performance Effect of the Content of Alloying Elements in the Development of High Entropy Alloys of the Ti-Nb-Zr-Ta-Mo Family for Biomedical Applications
[ES] Las aleaciones biomédicas de alta entropía (Bio-HEA) con propiedades no tóxicas, sintetizadas mediante métodos de pulvimetalurgia, han recibido una atención limitada a pesar de su potencial para un rendimiento mecánico y biológico favorable. Este estudio tuvo como objetivo investigar …
-
Glass Forming Ability and Relaxation Behavior of Zr Based Metallic Glasses
… in composition and inclusion of different alloying elements was studied by using thermal techniques to determine important GFA indicators for Zr-based bulk metallic glasses (BMG). The effect of alloying elements, annealing temperature and annealing time on the thermal and structural …
-
Production of sintered NdFeB magnets from scrap alloy powders
… due to supply restrictions. Rare earth elements are essential for the highest energy permanent magnets which are used in high-tech green applications such as wind turbines and electric motors. This rare earth 'crisis' has been addressed by many authors by reducing or substituting the …
Page 1 of 19