Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 59 for “"Alloys -- Microstructure."”.
-
Laser shock processing of magnesium alloys: microstructure evolution and enhanced mechanical properties
… of metallic materials, magnesium (Mg) and its alloys have attracted tremendous research interests due to their low density and high specific strength. However, the applications of Mg alloys is often restricted by their poor mechanical properties. Recently, LSP has been utilized to tailor the …
-
Anomalous Eutectic and Nanolaminated Composites of Mg-Al Alloys: Microstructure and In-Situ Compression Test
Eutectic alloys demonstrate excellent casting behavior and composite properties. Their morphologies are characterized by the simultaneous growth of at least two solid phases from the liquid phase. Besides, the solidification condition can affect the final morphology. Under a non-equilibrium …
-
Sensor development for intelligent processing of age hardenable aluminum alloys
… the aging response of heat treatable aluminum alloys. This type of system would allow for 'real time' evaluation of alloy properties as the material is age hardened. Such continuous monitoring, coupled with a control system, is referred to as 'intelligent processing'. The system consists of …
-
IMPACTS OF PRECIPITATES AND ELECTROCHEMICAL ASPECTS OF LOCALISED CORROSION IN INDUSTRIAL ALLOYS
… while segregations of Si in the SS304L microstructure led to discoveries of anomalies in existing corrosion susceptibility test methods. Overall, this thesis represents a holistic study of the various precipitates in the industrial alloys’ microstructure and their correlation to …
-
Redistribution Mechanisms and Quantification of Homogeneity in Friction Stir Welding and Processing of an Aluminum Silicon Alloy
… of nondeforming particle distributions in a cast alloys microstructure is highly important in controlling the materials strength, ductility, and fatigue resistance. Friction stir processing (FSP) is an effective post-casting technique for redistributing constituent material into a more homogeneous …
-
Investigation of Microstructure and Mechanical Behavior of Novel Powder-Extruded Al-Ce-Mg Alloys
… automotive industries. Conventional structural alloys, such as cast irons, carbon steels, and titanium alloys, have strength, weight, and cost limitations. Aluminum-based alloys, known for their lightweight and high strength, have gained popularity in these industries. This dissertation focuses …
-
Investigation of Fine-scaled Alpha Precipitation in the Modeled Ti-Mo and Ti-Mo-Al Alloys
… and mechanical characteristics, ? titanium alloys are becoming more and more significant in the domains of chemical industry, aerospace, and biomedical materials. The size scale, distribution, and volume fraction of the precipitated phase in the parent phase matrix are all significant …
-
Identification of atomic and microstructural responses in anhysteretic Fe-based ferromagnetic shape memory alloys
… This thesis focuses on a class of Fe-based alloys softer than amorphous ferromagnets but crystalline in structure, exhibiting linear, isotropic, as well as totally hysteresis-free magnetization. This class includes Fe-Ga, Al, Ge, Si and Pd alloys, and the majority of the experimental studies …
-
Effect of Microstructure on High-Temperature Mechanical Behavior of Nickel-Base Superalloys for Turbine Disc Applications
… and improved fuel efficiency. Nickel-base superalloys are the material of choice for turbine discs, which experience some of the highest temperatures and stresses in the engine. Engine performance is proportional to operating temperatures. Consequently, the high-temperature capabilities of disc …
-
Grain refinement and epitaxial interruption of freeform fabricated Ti-6Al-4V alloy
Includes bibliographical references.
-
Microstructural Evolution and Mechanical Response of Materials by Design and Modeling
… materials are highly correlated to their microstructure. The relationship between microstructure and mechanical properties can be established experimentally. The growing need for structural materials in industry promotes the study of microstructural evolution of materials by design using …
-
TEXTURE, MICROSTRUCTURE AND FORMABILITY OF ALUMINUM ALLOYS
Texture, microstructure and formability were studied in Direct Chill Cast (DC) and Strip Cast (SC) aluminum alloys with regard to crystallographic anisotropy, the Portevin-Le Chatelier effect and aging softening behavior. It was found that material properties change greatly with manufacturing …
-
Microstructure and Mechanical Properties of Additive Manufacturing Titanium Alloys After Thermal Processing
Titanium alloys are widely used for aerospace and biomaterial applications since their high specific strength, and high corrosion resistivity. Besides these properties, titanium is an excellent biocompatible material widely used for internal body implants. Because the products have complex …
-
Microstructure and texture evolution in cold-rolled and annealed alloy MA-956
… plate consisting of a layered and inhomogeneous microstructure was systematically assessed. The alloy contained in mass percent, 20 Cr, 4.8 Al, 0.4 Ti, 0.4 Y2O3, and the balance iron. The starting material was as-hot-rolled plate, 9.7 mm thick. The as-hot-rolled plate was subjected to 40%, 60%, …
-
Microstructural Phase Evolution In Laser Deposited Compositionally Graded Titanium Chromium Alloys
… followed by furnace cooling or air cooling). The alloys were characterized by SEM BSE imaging, XRD, EBSD, TEM and micro-hardness measurements to determine processing-structure-property relations. For the as-deposited alloy, α-Ti, β-Ti, and TiCr2 (C15 Laves) phases exist in varying phase fractions, …
-
Laser Surface Modification of AZ31B Mg Alloy Bio-Implant Material
Magnesium and its alloys are considered as the potential biomaterials due to their biocompatibility and biodegradable characteristics but suffer from poor corrosion performance. Various surface modification techniques are employed to improve their corrosion resistance. In present case, laser …
-
Structure Evolution and Nano-Mechanical Behavior of Bulk Metallic Glasses and Multi-Principal Element Alloys
Bulk metallic glasses and multi-principal element alloys represent relatively new classes of multi-component engineering materials designed for satisfying multiple functionalities simultaneously. Correlating the microstructure with mechanical behavior (at the microstructural length-scales) in these …
-
Study of interrupted aging in Al-Cu-Mg alloys, A
… the strength and toughness of heat treatable Al alloys. It consisted of the following three stages, namely, 1) artificially underaging at a typical temperature (150-200C) and quenching to room temperature, 2) reheating to a lower aging temperature (60-100C) for times that result in hardening, and …
-
Deformation Micro-mechanisms of Simple and Complex Concentrated FCC Alloys
… the intrinsic dislocation mechanisms in two FCC alloys. First alloy Al0.1CoCrFeNi was from a new class of material known as complex concentrated alloys, particularly high entropy alloys (HEA). The second was a conventional Al-Mg-Sc alloy in ultrafine-grained (UFG) condition. In the case of HEA, …
Page 1 of 3