Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 17 of 17 for “"Altium"”.

  1. Návrh a realizace testovacího polygonu pro řízení elektrické energie v bytových domech

    … polygonu. Gateway byla navržena v programu Altium Designer. Polygon byl navržen jako simulace malého domu nebo chaty. Výsledkem práce je prototyp gateway a laboratorní model polygonu vhodný pro další vývojovou a výukovou činnost.

    brno-tech Repository record for Návrh a realizace testovacího polygonu pro řízení elektrické energie v bytových domech (opens in a new tab)

  2. Model pásového vozidla s dálkovým rádiovým ovládáním

    … s návrhovým programem pro desky plošných spojů Altium Designer. Program mikroprocesoru bude vytvořen ve vývojovém prostředí CodeWarrior a to v jazyce C. K navrhování obvodů byli využity zpravidla katalogové listy jednotlivých komponent. Návrh se skládá z několika funkčních obvodových celků, …

    brno-tech Repository record for Model pásového vozidla s dálkovým rádiovým ovládáním (opens in a new tab)

  3. Distributed Element Designs for a Wireless System

    … schematic capture and layout was performed in Altium Designer. The RF system was able to transmit up to 60 cm with an input power of 0 dBm without any dedicated amplification. The use of a distributed element 2.4 GHz bandpass filter was used as an opportunity to investigate the impact on filter …

    gvsu Repository record for Distributed Element Designs for a Wireless System (opens in a new tab)

  4. Hönnun gítarpedals eftir lampamagnara

    … í Matlab, að lokum verður prentplata hönnuð í Altium og pedall fullgerður.

    reykjavik Repository record for Hönnun gítarpedals eftir lampamagnara (opens in a new tab)

  5. Mažatriukšmis stiprintuvas terahercinių dažnių detektoriams /

    … characteristics, amplifiers were designed using “Altium Designer”, milled with PCB rapid prototyping machine “LPKF ProtoMat S63” and soldered.

    vilnius Repository record for Mažatriukšmis stiprintuvas terahercinių dažnių detektoriams / (opens in a new tab)

  6. Design, Control and Evaluation of a Prototype Three Phase Inverter in a BLDC Drive System for an Ultra-Light Electric Vehicle

    … sensor- less control approaches was designed in Altium Designer. The PCB was manufactured and software control algorithms as well as drivers were imple- mented. The three phase inverter and its control algorithms were tested and eval- uated. The three phase inverter operates successfully with …

    chalmers Repository record for Design, Control and Evaluation of a Prototype Three Phase Inverter in a BLDC Drive System for an Ultra-Light Electric Vehicle (opens in a new tab)

  7. Low Cost Wet Diaper Detector System

    … detector. The prototype was designed using the Altium software environment and fabricated on a printed circuit board (PCB) using standard off-the-shelf components from the datasheet. Compared to other wet diaper detectors it has very low power consumption, is simple in design, and consumes a …

    waterloo Repository record for Low Cost Wet Diaper Detector System (opens in a new tab)

  8. Daiktų interneto maršrutizatorius /

    … router. In this work, using professionally "Altium Designer" program, has been successfully developed new libraries: TPS62050, LM46001, LAN8720A, BlueNRG, MAX3355E, LPC1768. All components of the plate have been properly positioned that PCB has a minimum parasitic capacities and optimal size. …

    vilnius Repository record for Daiktų interneto maršrutizatorius / (opens in a new tab)

  9. Design of High Efficiency Brushless Permanent Magnet Machines and Driver System

    … design and the control board is designed using Altium Designer. Both the motor and control board have been fabricated and tested to verify the design. The electrical and mechanical design are combined, and it provides an analytical IPMBLDC design method and an innovative and reasonable …

    ucf Repository record for Design of High Efficiency Brushless Permanent Magnet Machines and Driver System (opens in a new tab)

  10. Designing and developing nine-level Packed U-Cell (PUC9) inverter for high power applications

    … design the PCB of PUC9 and UX-Cell inverter with Altium Design software and test both patents experimentally in stand-alone and grid-connected modes.

    ets-quebec Download PDF for Designing and developing nine-level Packed U-Cell (PUC9) inverter for high power applications (opens in a new tab)

  11. A Design Methodology for Implementation of Serial Peripheral Interface Using VHDL

    In this thesis, an approach is proposed for the design and implementation of a serial peripheral interface using Complex Programmable Logic Devices, (CPLD's). The focus of this research was to develop an effective Serial Peripheral Interface. The Serial Peripheral Interface, (SPI), created by …

    usf Repository record for A Design Methodology for Implementation of Serial Peripheral Interface Using VHDL (opens in a new tab)

  12. Návrh elektroniky a řízení pro tester zařízení s dotykovým panelem

    Tato práce se zabývá komplexním návrhem řídicí elektroniky pro zařízení pro dotykové panely a následnou implementací základního komunikačního rozhraní mezi řídicím mikrokontrolerem a obslužným PC. Je zde podrobně popsán postup výběru vhodných senzorů pro osazení na testovací zařízení a také …

    brno-tech Repository record for Návrh elektroniky a řízení pro tester zařízení s dotykovým panelem (opens in a new tab)

  13. Generování pozičních dat pro rentgen DPS

    Cílem této práce bylo seznámit se s formátem pozičních dat pájecích plošek pro rentgen plošných spojů Phoenix X-ray Micromex 180 a následně vytvořit programy pro export dat vstupních pro toto zařízení. Teoretická část se věnuje popisu rentgenového zařízení a popisuje problematiku přepočtu a …

    brno-tech Repository record for Generování pozičních dat pro rentgen DPS (opens in a new tab)

  14. Monitorování výrobních zařízení

    Cieľom diplomovej práce je preštudovať možnosti vytvorenia monitorovacieho systému pre staršie výrobné zariadenia už v jestvujúcej prevádzke. Vybrať voči charakteru zariadení potrebné komponenty pre vytvorenie systému, ktorý je schopný snímať a poskytovať informácie o činnostiach na zariadení. …

    brno-tech Repository record for Monitorování výrobních zařízení (opens in a new tab)

  15. Kompaktní měnič pro BLDC motor

    Práce se zabývá návrhem a realizací kompaktního měniče pro bezkartáčový elektromotor o mechanickém výkonu 600 W a jmenovitém momentu 1,6 Nm. Motor je koncipován na napětí meziobvodu 300 V. Důraz je kladen především na cenu a jednoduchost. Na základě toho je měnič navržen s jednoúčelovými obvody. …

    brno-tech Repository record for Kompaktní měnič pro BLDC motor (opens in a new tab)

  16. Obvody pro tvarování svazku antény v pásmu L

    Tato práce se zaměřuje na návrh obvodů určených pro tvarování svazků (dále jen OTS) antén pasivního radaru. Ve své úvodní části postupně prochází základní teorii pasivních radarů a principy řízení svazků antén. Následně dochází k návrhu OTS na úrovni blokového schématu. Poté jsou vybrány obvody …

    brno-tech Repository record for Obvody pro tvarování svazku antény v pásmu L (opens in a new tab)