Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 133 for “"Aluminum-based"”.

  1. Plasma spraying of aluminum-based glass forming alloys

    … purpose of this research is to produce aluminum-based amorphous metallic coatings on aluminum alloy plates using an atmospheric plasma spray (APS) technique to form the corrosion resistant barrier coating. The corrosion resistance of APS coatings tested in a neutral salt-fog chamber …

    must-thes Repository record for Plasma spraying of aluminum-based glass forming alloys (opens in a new tab)

  2. Enhancing reactivity of aluminum-based structural energetic materials

    … such as peak blast pressure and blast impulse. Aluminum is a good candidate for such enhanced blast applications involving structural reactive warhead casings due to its high combustion enthalpy; however, under explosive loading, conventional aluminum casings expend little of the energetic …

    uiuc Repository record for Enhancing reactivity of aluminum-based structural energetic materials (opens in a new tab)

  3. Improving reactivity of aluminum-based structural energetic materials

    … A strong contender for this application is aluminum because of its high combustion enthalpy, but current aluminum blast casings do not expend much of this stored energy. Aluminum casings also tend to create fragments that are too large to ignite and provide blast enhancement. The objective …

    uiuc Repository record for Improving reactivity of aluminum-based structural energetic materials (opens in a new tab)

  4. Development of aluminum based composites by pressure-assisted sintering

    … through innovative combinations of materials. Aluminum matrix composites (AMCs) are one of these innovations that allow combining light weight alloys with chosen reinforcements in order to obtain improved materials when compared to unreinforced aluminum alloys, with optimized mechanical, wear …

    minho-thes Repository record for Development of aluminum based composites by pressure-assisted sintering (opens in a new tab)

  5. Cryomilling of Aluminum-based and Magnesium-based Metal Powders

    … causing significant grain growth. In this work, aluminum-rich and magnesium-rich alloys of varying composition are produced by cryomilling and characterized by x-ray diffraction. A novel consolidation process called high shear powder consolidation (HSPC) is used to densify as-received and …

    vt Repository record for Cryomilling of Aluminum-based and Magnesium-based Metal Powders (opens in a new tab)

  6. Optimization of enhancements to aluminum-based structural energetic materials

    … that reacts in the detonation environment. Aluminum is a good candidate for this application due to its low cost, widespread availability, good manufacturability, and high enthalpy of combustion. Difficulty arises in the timely ignition of the aluminum. A plain aluminum case produces mostly …

    uiuc Repository record for Optimization of enhancements to aluminum-based structural energetic materials (opens in a new tab)

  7. Shock compression response of aluminum-based intermetallic-forming reactive systems

    Heterogeneities at the meso-scale strongly influence the shock compression response of composite materials. These heterogeneities arise from both structural variations and differing physical/mechanical properties between constituents. In mixtures of reactive materials, such as Ni and Al, the …

    gatech Repository record for Shock compression response of aluminum-based intermetallic-forming reactive systems (opens in a new tab)

  8. PROCESSING, MICROSTRUCTURE AND MECHANICAL PROPERTIES OF ALUMINUM BASED METAL MATRIX COMPOSITES

    In the present study, processing, microstructure and properties of Al-4.5Cu alloy and A1-4.5Cu/15wt%SiCp metal matrix composites were investigated. The microstructural characterization studies revealed a relatively uniformly dispersed distribution of SiC particulates and a good interfacial …

    nus Repository record for PROCESSING, MICROSTRUCTURE AND MECHANICAL PROPERTIES OF ALUMINUM BASED METAL MATRIX COMPOSITES (opens in a new tab) Download file for PROCESSING, MICROSTRUCTURE AND MECHANICAL PROPERTIES OF ALUMINUM BASED METAL MATRIX COMPOSITES (opens in a new tab)

  9. Small Molecule Activation and Transformation using Aluminum-based Frustrated Lewis Pairs

    … which cannot form adducts – few of these use aluminum-based Lewis acids. The research outlined in this thesis expands the small molecule activation chemistry of FLPs to include Al.Combinations of bulky phosphines and AlX3 (X = halide or C6F5) with CO2 leads to the rapid activation to form the …

    toronto-retro Repository record for Small Molecule Activation and Transformation using Aluminum-based Frustrated Lewis Pairs (opens in a new tab)

  10. Study, development and characterization of aluminum based materials by additive manufacturing

    … kind of materials by DMLS, in particular aluminum alloys. Among these, AlSi10Mg0.3 casting alloy was investigated and characterized from both mechanical and microstructural (through optical and electron microscopy) point of view. It was previously fundamental to study the process …

    poli-torino Repository record for Study, development and characterization of aluminum based materials by additive manufacturing (opens in a new tab)

  11. Development of aluminum-based coatings produced by Cold Gas Dynamic Spraying

    … the development and characterization of aluminum-based coatings consolidated by the CGDS process. The first part of this thesis is dedicated to particle in-flight velocity measurements. Two different particle in-flight velocity measurement tools, a Cold Spray Meter (CSM) and a Particle …

    ottawa-retro Repository record for Development of aluminum-based coatings produced by Cold Gas Dynamic Spraying (opens in a new tab)

  12. Simultaneous phosphorus and nitrogen removal using aluminum based water treatment residual

    In this study, an aluminum-based water treatment residual (Al-WTR) from a local water treatment facility was investigated for its capacity for phosphorus (P) and nitrogen (N) removal in wastewater. Characterization results indicated that Al-WTR had a high content of amorphous aluminum hydroxide, …

    colostate Repository record for Simultaneous phosphorus and nitrogen removal using aluminum based water treatment residual (opens in a new tab)

  13. Environmental Life Cycle Comparison of Aluminum-based High Barrier Flexible Packaging Laminates

    … barrier layer, adhesive, and sealing layer. Aluminum foil and metallized polymer films are commonly used gas barrier layers in flexible packaging, but their true environmental impacts are not well-represented. This study investigated the potential environmental impacts of three widely-used, …

    rit Repository record for Environmental Life Cycle Comparison of Aluminum-based High Barrier Flexible Packaging Laminates (opens in a new tab)

  14. Aluminum-based Material Fabrication by Friction Stir Processing: Microstructural Evolution and Mechanical Properties

    … a) friction stir back extrusion (FSBE) of 6063 aluminum alloy for tube making and b) FSP of 7075 aluminum alloy from powder feedstock. FSBE fabricated Al 6063 alloy tubes with refined grains in the inner walls and less orientation asymmetry, which is beneficial to the thin-walled light-wight …

    utk-theses Repository record for Aluminum-based Material Fabrication by Friction Stir Processing: Microstructural Evolution and Mechanical Properties (opens in a new tab)

  15. Application of Machine Learning in Failure Prediction of Brazed-Aluminum Based Heat Exchangers

    Brazed aluminum plate-fin heat exchangers (BAHX), extensively used by the natural gas liquid recovery and gas processing industry, are subject to a uniquely stressful and harsh environment that involves large thermal stresses due to steady-state and transient thermal loads, mechanical loads, …

    houston Repository record for Application of Machine Learning in Failure Prediction of Brazed-Aluminum Based Heat Exchangers (opens in a new tab)

  16. Assessment of the biodistribution of aluminum-based vaccine adjuvants using ¹¹¹/¹¹⁵In-AlO(OH)

    Aluminum-based adjuvants are found in a wide range of non-living vaccines to enhances antibody-mediated immune responses. Alhydrogel is one of the most common aluminum-based adjuvants and consists of 1-12 μm clusters of loosely aggregated aluminum oxyhydroxide (AlO(OH)) nanoparticles. Despite …

    ubc Repository record for Assessment of the biodistribution of aluminum-based vaccine adjuvants using ¹¹¹/¹¹⁵In-AlO(OH) (opens in a new tab) Download PDF for Assessment of the biodistribution of aluminum-based vaccine adjuvants using ¹¹¹/¹¹⁵In-AlO(OH) (opens in a new tab)

  17. Characterization of impact initiation of reactions in aluminum-based, intermetallic-forming reactive materials

    … compressed intermetallic-forming aluminum-based reactive materials upon impact initiation, consisting of equi-volumetric tantalum-aluminum, tungsten-aluminum, nickel-aluminum, and pure aluminum. A modified Taylor rod-on-anvil setup was employed to determine the reaction initiation …

    gatech Repository record for Characterization of impact initiation of reactions in aluminum-based, intermetallic-forming reactive materials (opens in a new tab)

  18. Transformation of bulk alloys to aluminum-based ceramic nanowires and their selected applications

    One-dimensional (1D) nanomaterials may offer great benefits by enabling superior thermal, mechanical, and electrical properties compared to the conventional particles of the same composition. Their efficient fabrication has been sought after for many decades. Unfortunately, known routes to …

    gatech Repository record for Transformation of bulk alloys to aluminum-based ceramic nanowires and their selected applications (opens in a new tab)

Page 1 of 7