Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 36 for “"Amorphous Alloy"”.
-
Development of multi-component iron-based amorphous alloy
… present study is concerned with developing a new alloy system which is capable of forming a metallic glass on rapid solidification of the melt, rather than modifying a known glass forming composition, and assessing its glass forming ability. Iron (Fe) was chosen as the solvent element because it …
-
Investigation of Zr-based amorphous alloy membranes for hydrogen purification
… zirconium‐copper and zirconium‐copper‐titanium amorphous alloys as hydrogen purification membranes. Binary ribbons of Zr55Cu45 and Zr58Cu42 (wt%) (Zr46Cu54 and Zr49Cu51 at% respectively) were fabricated by melt spinning. DSC analysis determined the thermal behaviour of each ribbon under argon …
-
Hydrogen Permeation and Crystallization Kinetics of Ni-based Amorphous Alloy Membranes
Amorphous Ni-based alloy membranes show great promise as inexpensive, hydrogen-selective membrane materials. One of the main barriers to the commercial uptake of these materials is their tendency to crystallize during long-term operation at elevated temperatures, a process which decreases strength, …
-
Structure and Phase Transformation of Nanocrystalline and Amorphous Alloy Thin Films
… study on the structure and morphology of Ag-Si alloy thin films shows nanocrystalline Ag clusters embedded in amorphous Si matrix for samples of different compositions and thicknesses. Ag cluster sizes increase from 2.5 nm to 3.5 nm as annealing temperature increases from room temperature to …
-
Hydrogen Solubility and Permeability of Ni-Nb-Zr based Amorphous Alloy Membranes
… gases like CO etc. Conventionally, Pd and Pd alloy membranes are being used for filtration of hydrogen from other mixed gases in coal-gasification produce. But high cost of Pd have forced scientific community to explore the possibility of using alternate to Pd as separation membrane and …
-
Glass forming ability and magnetic characteristics of rare earth - Transition metal alloys
… (GFA) and hard magnetic properties of bulk amorphous alloy Nd60Fe30Al10 were studied. RE60TM30MT10 alloys with RE = Nd, Sm, Dy, Gd, TM = Fe, Co and MT = Al, B, Si were prepared. Only substitutions by B and Si retained both the good GFA and hard magnetic properties at room temperature. Fully …
-
Study of conventional annealing and laser annealing of vitreloy1b zr-based BMG
The machining response of a Zr-based amorphous alloy (Zr44Ti11Cu10Ni10Be25) when subjected to nano-second laser machining is investigated. The surface integrity of laser machined fields in two sets of experiments is studied using scanning electron microscopy (SEM) followed by subsequent X-ray …
-
Modelle für die Kleinwinkel-Streuung und Anwendungen
… of the process of nanocristallization of amorphous alloys. The investigation of SANS on Fe73.5Si15.5B7Cu1Nb3 shows that the Fe3Si type nanocrystals created in the amorphous matrix during annealing are covered by Nb-atoms. The accumulation of Nb-atoms or Nb-B-aggregates acting as inhibitors …
-
Amorphous Phase Formation In Mechanically Alloyed Fe-based Systems.
… control them. The glass-forming ability (GFA) of alloys can be substantially increased by a proper selection of alloying elements and the chemical composition of the alloy. High GFA will enable in obtaining large section thickness of amorphous alloys. Ability to produce glassy alloys in larger …
-
Growth and characterization of amorphous ultrathin ruthenium metal films
… resulting in the failure of the barrier. Because amorphous metal alloys do not form grains, amorphous Ru alloys have been examined as a way to eliminate the grain boundary diffusion of copper across the film. Early attempts to produce such films with phosphorus as an alloying element by chemical …
-
Materials and environmental applications for sonochemistry
… high-intensity ultrasound in the production of amorphous alloys, amorphous coatings, metallic coatings, and organic waste abatement. The results of amorphous alloy production from organometallic precursors is discussed. Amorphous FeP and FeCo were produced and the effects of cavitation on the …
-
Morphological analysis and post processing of platinum-titanium nanoparticles
… morphology prior to full oxidation is an amorphous alloy structure. Theoretical analysis through DFT calculation was also employed to investigate the addition of oxygen to the nanoparticle in a layer by layer manner. The theoretical results confirmed that the most stable structure after …
-
STUDY OF STRUCTURAL, THERMAL, HYDROGENATION AND COMPOSITIONAL PROPERTIES OF NI-BASED AMORPHOUS MEMBRANES USING EXPERIMENTAL AND COMPUTATIONAL METHODS
… with excellent hydrogen permeation properties. Amorphous alloy membranes, such as NiNbZr membranes are good contenders due to their high glass forming ability and the hydrogen permeation properties comparable to Pd or Pd alloys. In spite of significant research performed on these glassy alloy …
-
Wear, Friction and High Shear Strain Deformation of Metallic Glasses
… studied as a function of composition, with amorphous alloy formation over the narrow range of 10 at% to 20 at% phosphorus. Pulsed current electrodeposition was used to obtain these binary amorphous alloys, which offers a facile and versatile alternative to conventional melt quenching route. …
-
Electrochemical Hydrogen Absorption by Zr-Cu-Al-Ni Metallic Glasses
… of hydrogen has been studied on the Zr-based amorphous alloys. The influence of hydrogen absorption on the stability of the amorphous phase and its crystallisation was investigated. Additionally, the cathodic hydrogen reaction mechanism on the surface of the alloy, the reversibility of the …
-
Diffusion and the thermal stability of amorphous copper-zirconium
… been made of diffusion and thermal relaxation in amorphous CU50Zr50. Samples were prepared by melt-spinning under vacuum. Diffusion measurements were made over the temperature range from 317 to 385 C, using Ag and Au as substitutional impurities, by means of Auger electron spectrometry (AES) and …
-
INTRINSIC STRENGTH, PRECIPITATION HARDENING AND TRIBOLOGICAL BEHAVIOR OF HIGH-ENTROPY ALLOYS
<p>Recently, concentrated multicomponent alloys, or high-entropy alloys (HEAs) consisting of several principal components in approximately equiatomic proportions, have increasingly attracted research interest because of their unusual intrinsic characteristics, such as severe lattice distortion and …
-
Processing and properties of biocompatible metallic glasses
Amorphous metals, or bulk metallic glasses (BMGs), based on the Mg-Zn-Ca ternary alloy system, are an emerging class of material that offer many improvements over conventional crystalline magnesium alloys. These materials present a very real possibility of replacing current metallic and polymeric …
-
BIOMAGNETISM: Stimulating and Recording Muscle Activity
… a novel low frequncy magnetic shield composed of amorphous alloy. Employing non-physiological test sources, the unshielded system could resolve a multipole configuration as an equivalent dipole source. Unfortunately, the shielded could not be completed and the magnetometer's sensitivity remains …
Page 1 of 2