Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 111 for “"Amplification factor"”.

  1. Optimisation of Natural Laminar Flow Aerofoils and Wings for Robustness to Critical Transition Amplification Factor

    … are represented by the critical transition amplification factor, or N-factor, from the eN transition model. A probabilistic distribution and quantification method for uncertainty in critical N-factor is first selected. This is then used to assess NLF aerofoil performance with uncertainty in …

    whiterose Download PDF for Optimisation of Natural Laminar Flow Aerofoils and Wings for Robustness to Critical Transition Amplification Factor (opens in a new tab)

  2. The Spectral Asymptotics of Toeplitz Operators on Hilbert Spaces of Analytic Functions

    … an input to the equation, in which case the amplification factor is called an “eigenvalue.” The usefulness of these amplification factors is that they can be used to describe properties of the physical system. In this dissertation, I have studied this amplification factor for a related set of …

    clemson Repository record for The Spectral Asymptotics of Toeplitz Operators on Hilbert Spaces of Analytic Functions (opens in a new tab)

  3. Effects of Different Stress Amplification Rates on Moment Resisting Frames with Reduced Beam Sections

    … material properties with different flow stress amplification factors to assess steel MRFs with RBS. Two steel heats, one having yield strength close to nominal yield strength of CAN/CSA G40.20/21 350W steel and other closer to probable yield strength of 385 MPa were used as bases for material …

    carleton Repository record for Effects of Different Stress Amplification Rates on Moment Resisting Frames with Reduced Beam Sections (opens in a new tab)

  4. Design, Analysis, and Applications of Failure Amplification Experiments

    … focus of this study is related to the Failure Amplification Method (FAMe) proposed by Joseph and Wu (2004). They suggested the use of an “amplification factor” to increase the information from experiments with a binary response variable. In addition to the amplification factor having a known …

    utk-theses Repository record for Design, Analysis, and Applications of Failure Amplification Experiments (opens in a new tab)

  5. Truck Platoon Impacts on Prestressed Concrete Girder Bridges

    … equations to estimate the live load distribution factor (Ft), may not be adequate for autonomous vehicles, especially regarding lane width requirements. The goal of this study is twofold: first, assess the performance of prestressed concrete girder bridges under truck platoons, considering …

    mcmaster Repository record for Truck Platoon Impacts on Prestressed Concrete Girder Bridges (opens in a new tab)

  6. Microtremor recordings in Northern Mississippi: Evaluating site effect and correlating with wave climate

    … predominant frequency (f0) and roughly estimate amplification factor as HVSR value at f0 (HVSR@f0). Within Northern Mississippi area, the f0 is tightly correlated with unconsolidated sediments thickness (UST) and average shear wave velocity (Vs) are also estimated. Within the low frequency range …

    mississippi Repository record for Microtremor recordings in Northern Mississippi: Evaluating site effect and correlating with wave climate (opens in a new tab)

  7. QUIC Protocol : Resilience against flooding attacks and defense mechanism

    … Syn Cookies under Syn flood attacks. The DDoS amplification factor was measured and analyzed based on the results. This work also proposes a detection mechanism based on a Bloom filter combined with Generalized Likelihood Ratio Cumulative Sum (GLR-CUSUM) to adapt to evolving attack patterns. It …

    concordia Download PDF for QUIC Protocol : Resilience against flooding attacks and defense mechanism (opens in a new tab)

  8. Velocity and Temperature Measurements in a High Mach Number Shock-Turbulence Interaction

    … The measured axial velocity fluctuation amplification factor (⟨UDS^ 2 ⟩ / ⟨ UF S^′2 ⟩) was nominally 1.1-1.2 over the Reynolds number range tested. The measured values were consistent with LIA. The temperature fluctuation amplification factor [(⟨TDS ′2 ⟩ / ⟨TDS⟩^2 ) / (⟨TF S^′2 ⟩ / ⟨TF …

    tamu Repository record for Velocity and Temperature Measurements in a High Mach Number Shock-Turbulence Interaction (opens in a new tab)

  9. Effect of humps on the stability of boundary layers over an airfoil

    … integrated along a prescribed path to yield the amplification factor (i.e., N-factor), which is used to predict transition from laminar to turbulent flow. The analysis is performed for different heights and locations of the hump and for different Mach numbers. The results show that …

    vt Repository record for Effect of humps on the stability of boundary layers over an airfoil (opens in a new tab)

  10. Analytical Modeling of Write Amplification for Garbage Collection in Solid-State Drives

    … To prolong SSD lifespan, minimizing write amplification factor, a metric for the garbage collection (GC) algorithm overhead that unproductively consumes the write budget, becomes a central problem in the flash management software stack known as the flash translation layer (FTL). …

    toronto-retro Repository record for Analytical Modeling of Write Amplification for Garbage Collection in Solid-State Drives (opens in a new tab)

  11. Effect of roughness element on the stability of boundary layers

    … instability of this flow is analyzed, and the amplification factors are computed. Results are obtained for several height/width ratios and locations. The theoretical results have been used to correlate the experimental results of Greening and Walker. The observed transition locations are found …

    vt Repository record for Effect of roughness element on the stability of boundary layers (opens in a new tab)

  12. Torsional effects in structures subjected to strong ground motion

    … Parametric studies were made for the dynamic amplification of the torsional response of simple structural systems. An amplification factor of about 2.5 was observed for static eccentricity in structural response arising from earthquake ground excitation.

    uiuc Repository record for Torsional effects in structures subjected to strong ground motion (opens in a new tab)

  13. Seismic Analysis of and Provisions for Dry-Stack Concrete Masonry Wall Systems with Surface Bond in Low-Rise Buildings

    … parameters, including the force reduction factor, overstrength factor, and the displacement amplification factor. To determine these factors the guidelines from the Federal Emergency Management Agency (FEMA) Quantification of Building Seismic Performance Factors 2009 were followed. The …

    byu Repository record for Seismic Analysis of and Provisions for Dry-Stack Concrete Masonry Wall Systems with Surface Bond in Low-Rise Buildings (opens in a new tab) Download PDF for Seismic Analysis of and Provisions for Dry-Stack Concrete Masonry Wall Systems with Surface Bond in Low-Rise Buildings (opens in a new tab)

  14. Earthquake-induced inelastic displacement ratio in reinforced concrete box girder bridges in California

    … the inelastic displacement is estimated using an amplification factor (R_d) suggested by AASHTO which was developed based on Single-Degree-of-Freedom system. This study models the nonlinear behavior in different components of bridge and presents an equation of inelastic displacement ratio, C_μ, …

    ndsu Repository record for Earthquake-induced inelastic displacement ratio in reinforced concrete box girder bridges in California (opens in a new tab)

  15. Dynamic response of simple pile-structure systems

    … are to assess the effects of the various factors that affect the response of the system. The second part deals with the harmonic response of rigid and elastically supported simple systems on pile groups. The main aim is to incorporate pile-to-pile interaction and investigate its effect on …

    rice Repository record for Dynamic response of simple pile-structure systems (opens in a new tab)

  16. Optimization of in-plane directional microphone

    … is presented. Finally, the expression for "amplification factor" is derived and selection of appropriate performance criterion could lead to improved sensitivity.

    texas Repository record for Optimization of in-plane directional microphone (opens in a new tab)

  17. Adsorbuotų biomolekulių tyrimas naudojant naujus Raman sklaidą stiprinančius paviršius /

    … with a silver coating. The optimal SERS signal amplification factor, which averages ~ 3x105 over the entire active area, has been achieved. Using these SERS substrates, we developed and characterised new different mixed self-assembled monolayers that could be applied to the construction of tBLM …

    vilnius Repository record for Adsorbuotų biomolekulių tyrimas naudojant naujus Raman sklaidą stiprinančius paviršius / (opens in a new tab)

  18. Design and Analysis of an Explosive Driven Hydrodynamic Conical Shock Tube

    … as (R).22. The charge weight was amplified by a factor of 3600 compared to a theoretical amplification of 7770. An estimate of the energy absorbed by the breach plug (which houses the charge) during an explosion was performed. The peak pressure data taken from the detonation of number 8 strength …

    ucf Repository record for Design and Analysis of an Explosive Driven Hydrodynamic Conical Shock Tube (opens in a new tab)

Page 1 of 6