Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 47 for “"Analog Control"”.

  1. Analog Control of the Diamond Quantum Processor

    … long coherence times and high-fidelity optical control at room temperature, making them a promising platform for quantum technologies. Until now, they have been operated almost exclusively using the gate-based digital quantum computing (DQC) paradigm. This thesis introduces a novel derivation of …

    anu Repository record for Analog Control of the Diamond Quantum Processor (opens in a new tab)

  2. Galvanically isolated transmission of analog control signals and study of commercial state of the art technology for satellites and launchers

    Space, the unknown place where satellites operate on our behalf. In space, the only known renewable energy comes from the sun, where the energy is captured by solar cells that supply all electronics on-board the satellite via rechargeable batteries. With an environment surrounded by vacuum and …

    chalmers Repository record for Galvanically isolated transmission of analog control signals and study of commercial state of the art technology for satellites and launchers (opens in a new tab)

  3. Nonlinear control of an electrostatically actuated MEMS

    … may be primarily categorized as digital and analog. Although the technology in digital operations is quite well developed the analog operations are not as developed due to an inherent nonlinear phenomenon in electrostatic actuation commonly known as "snap-through" "or pull-in." The concern of …

    ttu Repository record for Nonlinear control of an electrostatically actuated MEMS (opens in a new tab)

  4. Digital Control for Power Factor Correction

    … implementation and improvement of a digital controller for a power factor correction (PFC) converter. The development of the telecommunications industry and the Internet demands reliable, cost-effective and intelligent power. Nowadays, the telecommunication power systems have output current …

    vt Repository record for Digital Control for Power Factor Correction (opens in a new tab)

  5. Digital control of a multi-channel boundary-conduction-mode boost converter for power-factor-correction applications

    This thesis focuses on the design of digital control schemes for multi-channel boundary-conduction-mode (BCM) boost converters. Multi-channel BCM boost converters are commonly used for the front-end power-factor-corrected (PFC) stage of isolated ac-dc power supplies due to the advantages of being …

    cork Repository record for Digital control of a multi-channel boundary-conduction-mode boost converter for power-factor-correction applications (opens in a new tab)

  6. Discrete signal processing techniques for power converters : multi-carrier modulation and efficient filtering techniques

    Digital control has become ubiquitous in the field of power electronics due to the ease of implementation, reusability, and flexibility. Practical engineers have been hesitant to use digital control rather than the more traditional analog control methods due to the unfamiliar theory, relatively …

    ubc Repository record for Discrete signal processing techniques for power converters : multi-carrier modulation and efficient filtering techniques (opens in a new tab) Download PDF for Discrete signal processing techniques for power converters : multi-carrier modulation and efficient filtering techniques (opens in a new tab)

  7. Parameter plane analysis of automatic control systems using an IBM compatible microcomputer

    A group of lesser used analog control system design techniques, generally termed parameter plane methods, is examined through the use of an IBM compatible microcomputer program developed as part of this thesis. The coefficients of a system's characteristic polynomial are determined by the plant and …

    nps Repository record for Parameter plane analysis of automatic control systems using an IBM compatible microcomputer (opens in a new tab)

  8. Preconditioner circuit analysis

    … must be attenuated and measured to provide control feedback for many applications like medium voltage generators or pulsed power systems. How these medium voltage signals can be conditioned so that they can be input to analog control circuits or analog-to-digital converters is the focus of …

    nps Repository record for Preconditioner circuit analysis (opens in a new tab)

  9. An interactive computer aid for the design and analysis of linear, single input

    In this thesis the development of the Digital and Analog Control System Analysis Program (DACSAP) is discussed. DACSAP is an interactive computer aid for the design and analysis of linear, single input/output feedback control systems. DACSAP is user friendly; it uses menus for option selection and …

    nps Repository record for An interactive computer aid for the design and analysis of linear, single input (opens in a new tab)

  10. Development of a power electronics for a flywheel energy storage system

    … DC-DC converter, allowing the use of mostly analog control. Second, there is a problem associated with the existing six-step brushless DC motor/generator control in the generator mode. A twelve-step control scheme is proposed to solve this problem. Third, high-switching frequency is necessary …

    vt Repository record for Development of a power electronics for a flywheel energy storage system (opens in a new tab)

  11. Digital current loop control of a brushless DC motor

    Servo control of motors has important applications m such areas as robotics, numerically controlled machines and 'fly by wire* aircraft systems. The development of high power high coercivity magnetic alloys, such as samarium cobalt, has led to the advent of the brushless dc machine, which offers a …

    dcu Download PDF for Digital current loop control of a brushless DC motor (opens in a new tab)

  12. Design of a Hybrid Digital-Analog Power Supply for Semiconductor Testing on Automated Test Equipment

    … This work presents a hybrid digital–analog control approach to address these challenges. By combining the strengths of analog circuitry with the flexibility of digital control, the system can adapt its behavior during operation. In particular, time-variant control strategies are used …

    qucosa-diss

  13. A Comparison of Analog and Direct Digital Control (DDC) of a Physical Process

    … Corporation. There are two main categories of control available to the user: (1) analog control and (2) digital control. Within each of these categories the following types of control systems are available: (1) Proportional control, (2) Proportional-Integral control, (3) …

    ucf Repository record for A Comparison of Analog and Direct Digital Control (DDC) of a Physical Process (opens in a new tab)

  14. Identification and Rendering of Contact Dynamic Models in Robotic and Haptic Systems

    … ability to render highly damped environments. Analog control is proposed as an alternative for implementing high impedance virtual environments, and a study of analog haptic stability is presented. A mixed analog-digital is also proposed which uses nonlinear analog feedback and real-time …

    queens Repository record for Identification and Rendering of Contact Dynamic Models in Robotic and Haptic Systems (opens in a new tab)

  15. One way of Stabilizing a Bipedal Walking Machine

    A feedback control system for a bipedal walking machine model given in previous study is presented and analyzed. The bipedal model is first simplified and then equations of motion are derived. Criteria for stability are chosen and different control systems are briefly considered. In the survey of …

    sdstate Repository record for One way of Stabilizing a Bipedal Walking Machine (opens in a new tab)

  16. Control of Switch-mode Power Supplies A digital approach for half-bridge converters

    In this master thesis a digital controller for a switch-mode power supply (SMPS) based on a half-bridge topology has been implemented. The SMPS originally has an analog control board. This original control board has been removed and replaced by a digital controller. Hardware for output voltage and …

    chalmers Repository record for Control of Switch-mode Power Supplies A digital approach for half-bridge converters (opens in a new tab)

  17. Optical end point sensing and digital control of a scanning tunneling microscope

    … addressed in this thesis is that of digitally controlling a Scanning Tunneling Microscope and implementing end point sensing to close the control loop for accurate X-Y positioning of the microscope tip. This first part entails modifying a microscope with an analog controller so that it may be …

    ubc Repository record for Optical end point sensing and digital control of a scanning tunneling microscope (opens in a new tab) Download PDF for Optical end point sensing and digital control of a scanning tunneling microscope (opens in a new tab)

  18. Novel Digital Controller for Multi Full-Bridge DC/DC Converter

    … but suffers from complexity associated with an analog control implementation. This thesis presents a novel Look-Up-Table (LUT) based digital controller required for such converter. The applied design approach also reduces the design time and controller requirements, which in turn decreases the …

    queens Repository record for Novel Digital Controller for Multi Full-Bridge DC/DC Converter (opens in a new tab)

  19. Modeling and Control of a Single-Axis Magnetic Levitation System Using LabVIEW

    This research investigates the control of a low cost vertical-axis maglev system for mechatronics and controls education. The tabletop maglev system consists of an electromagnetic coil as the actuator that levitates a ferromagnetic object while an infrared sensor is used to determine the object's …

    marquette Repository record for Modeling and Control of a Single-Axis Magnetic Levitation System Using LabVIEW (opens in a new tab)

Page 1 of 3