Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 48 for “"Analog Filters"”.

  1. A New Algorithm for the Tuning of Analog Filters

    Made available in DSpace on 2014-12-12T20:55:03Z (GMT). No. of bitstreams: 1 8008956.pdf: 2875974 bytes, checksum: b355d49c46adef69f1fe26d58398c0b1 (MD5) Previous issue date: 1979

    uiuc Repository record for A New Algorithm for the Tuning of Analog Filters (opens in a new tab)

  2. Design and Automatic Calibration of Analog Filters for VLSI Applications

    … of D flip-flops, counters, switches, digital to analogue converter, and passive components. The tuning method was verified by simulation and experimental results. The simulation results show the frequency tuning error of 0.13% and the bandwidth tuning error of 0.88% at 1.5 GHz with bandwidth of …

    tamu Repository record for Design and Automatic Calibration of Analog Filters for VLSI Applications (opens in a new tab)

  3. Design and Applications of Minimally Invasive All-Pole Analog Filters

    … design technique for minimally invasive all-pole analog lowpass filters is introduced and the concept of minimally invasive filtering has been generalized for higher orders both in voltage-mode and current-mode operations. The proposed fully differential solution has minimal impact on the in-band …

    tamu Repository record for Design and Applications of Minimally Invasive All-Pole Analog Filters (opens in a new tab)

  4. Nonlinearity and noise modeling of operational transconductance amplifiers for continuous time analog filters

    … Transconductance Amplifier-Capacitor) filters is proposed. Efficient procedures for evaluating nonlinear distortion and noise valid for any filter of arbitrary order are developed based on the matrix description of a general OTA-C filter model . Since these procedures use OTA …

    tamu Repository record for Nonlinearity and noise modeling of operational transconductance amplifiers for continuous time analog filters (opens in a new tab)

  5. 3D Electromagnetic Simulation Tool Exposure for Undergraduate Electrical Engineers: Incorporation Into an Analog Filters Course

    … High-Frequency Amplifier Design, EE 425/455: Analog Filter Design, EE 502: Microwave Engineering, and EE 533: Antennas. As a starting point, EE 425/455 was targeted. In choosing which filters to investigate, simplicity and cost were the most important factors. For simplicity, transverse …

    calpoly Repository record for 3D Electromagnetic Simulation Tool Exposure for Undergraduate Electrical Engineers: Incorporation Into an Analog Filters Course (opens in a new tab)

  6. High Linearity Techniques for Analog Filters, Built-in Testing and Impedance Spectroscopy in Scaled CMOS Technologies

    … highly-complex digital circuits, high-fidelity analog peripherals, radio-frequency (RF) circuits, and power management circuits. Advancement in SoC enabled new technologies such as smart homes, smart cities, and wearable medical devices. However, the increasing number of integrated analog parts …

    tamu Repository record for High Linearity Techniques for Analog Filters, Built-in Testing and Impedance Spectroscopy in Scaled CMOS Technologies (opens in a new tab)

  7. Design and security of analog and mixed-signal circuits with innovations in temperature sensing for power/thermal Management, Trojan detection in analog filters, and optimization for programmable current mirrors

    … hardware Trojans. By examining continuous time filters such as the KHN filter, the Tow-Thomas filter structures, and switched-capacitor filters, the research demonstrates the crucial relationship between passive component values and the nonlinear parameters of amplifiers in either fostering or …

    iastate Repository record for Design and security of analog and mixed-signal circuits with innovations in temperature sensing for power/thermal Management, Trojan detection in analog filters, and optimization for programmable current mirrors (opens in a new tab)

  8. Implementation of comb filters by sampled analog techniques.

    The design of sampled analog filters using Z-transform techniques developed in digital filter theory is studied. Both recursive and non-recursive algorithms are implemented and analyzed. Some deviations from theoretical frequency responses are noted. An analog Fourier transformer is constructed by …

    nps Repository record for Implementation of comb filters by sampled analog techniques. (opens in a new tab)

  9. Digital Filtering of Evoked Potentials Using a Microprocessor: A Feasibility Study

    … This is not readily removed by prefiltering with analog filters since a wideband system must be used to avoid waveform distortion secondary to phase shift. Zero-phase digital filters, however, may be used to filter the averaged waveform without causing distortion. This research examines the …

    marquette Repository record for Digital Filtering of Evoked Potentials Using a Microprocessor: A Feasibility Study (opens in a new tab)

  10. Improved radar range-gated MTI processor

    A redesigned timing circuit and improved handpass filters were constructed and integrated with the MTI range-gate-and-filter modification kit for the Naval Postgraduate School AN/UPS-1D radar. Principle improvements allow operation is a jittered PRF mode and increased effectiveness of channel …

    nps Repository record for Improved radar range-gated MTI processor (opens in a new tab)

  11. Some Comparisons Between FIR and IIR Digital Filters

    … phase, finite impulse response (FIR) digital filters and infinite impulse response (IIR) digital filters which meet equivalent frequency domain specifications. The basis of comparison is, for the most part, the number of multiplications per sample required in the usual realizations of these …

    marquette Repository record for Some Comparisons Between FIR and IIR Digital Filters (opens in a new tab)

  12. Computer aided filter design.

    … find equivalent digital filter realizations of analog filters. An analog video bandpass filter for TV Intermediate Frequency signal extraction was selected as an example. First we introduce the Finite Impulse Response Filter (FIR) and the Remez program that is used for optimal FIR filter design. …

    nps Repository record for Computer aided filter design. (opens in a new tab)

  13. Oversampling A/D Converters with Improved Signal Transfer Functions

    … image-rejection requirements of the front-end filters an oversampling complex discrete-time ΔΣ ADC with a signal-transfer function that achieves a significant filtering of interfering signals is proposed. A filtering ADC reduces the complexity of the receiver by minimizing the requirements of …

    toronto-retro Repository record for Oversampling A/D Converters with Improved Signal Transfer Functions (opens in a new tab)

  14. IIR Digital Filter (For CT Data Collection System at G.E. medical Systems Div.)

    … assumption that one has a basic understanding of analog filters and z-transforms. Some knowledge of digital filters would also be helpful. Chapter 1 begins with a description of the present CT Data Collection Architecture. The goals of the project are then discussed. Chapter 2 discusses the analog …

    marquette Repository record for IIR Digital Filter (For CT Data Collection System at G.E. medical Systems Div.) (opens in a new tab)

  15. Design Considerations for a Digital Audio Equalizer

    … error between a digital and a "reference" analog equalizer throughout the entire audio frequency range from 20 Hz to 20 Khz. The first step is to obtain a set of analog filters that suitably represent the reference equalization. From these filters, digital filter coefficients are generated …

    ucf Repository record for Design Considerations for a Digital Audio Equalizer (opens in a new tab)

  16. Organic inkjet-printed carbon nanotube field effect transistor DC model for sensing applications

    … the way for fully printed passive and active analog filters. The main electrical component being researched to meet industrial standards is the printed transistor. This thesis establishes a digital model of a unique transistor, designed and printed in-house. The behavior of the device was …

    uab Repository record for Organic inkjet-printed carbon nanotube field effect transistor DC model for sensing applications (opens in a new tab)

  17. Analog Feedback Control of Broadband Fan Noise

    … noise control (ANC) has been implemented using analog filters to reduce broadband noise from a small axial cooling fan. Previous work successfully attenuated narrow-band, tonal portions of the noise using a digital controller. The practical performance limits of this system were reached and it …

    byu Repository record for Analog Feedback Control of Broadband Fan Noise (opens in a new tab) Download PDF for Analog Feedback Control of Broadband Fan Noise (opens in a new tab)

  18. Inexpensive solutions for direction finding of bridge-to-bridge radio transmitters using phase difference in received signal

    … the phase difference using both a series of analog mixers and filters as well as digitally, using software radio. Analog filters were built and tested to determine the relationship between phase difference and voltage output. Software programs were written for a Software-Defined Radio …

    nps Repository record for Inexpensive solutions for direction finding of bridge-to-bridge radio transmitters using phase difference in received signal (opens in a new tab)

Page 1 of 3