Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 18 of 18 for “"Anchorage Zone"”.

  1. Analysis and Control of Anchorage-Zone Cracking in Prestressed Concrete

    Made available in DSpace on 2014-12-08T23:56:50Z (GMT). No. of bitstreams: 1 6706773.pdf: 7050641 bytes, checksum: 7f724152f0a863c87e407ebf60abd3de (MD5) Previous issue date: 1966

    uiuc Repository record for Analysis and Control of Anchorage-Zone Cracking in Prestressed Concrete (opens in a new tab)

  2. Anchorage Zone Design for Pretensioned Bulb-Tee Bridge Girders in Virginia

    … of Virginia develop cracks within the anchorage zone region. The lengths and widths of these cracks range from acceptable to poor and in need of repair. Field observations also indicate deeper cross sections, very heavily prestressed sections, and girders with lightweight concrete tend …

    vt Repository record for Anchorage Zone Design for Pretensioned Bulb-Tee Bridge Girders in Virginia (opens in a new tab)

  3. Fibre-reinforced post-tensioned anchorage zone An experimental comparison of reinforcement configurations

    … In post-tensioned concrete structures, the anchorage zones are critical details, which normally end up both heavily reinforced and labour-intensive while following the manufacturer’s European Technical Assessment (ETA) approval for additional reinforcement and applicable design procedures. …

    chalmers Repository record for Fibre-reinforced post-tensioned anchorage zone An experimental comparison of reinforcement configurations (opens in a new tab)

  4. Performance and Design of Anchorage Zones for Post-Tensioned Box Girder Bridges

    … form of bridge construction. The post-tensioning anchorage zone is the location where very large prestressing forces are applied to the box girder, and then spread into the box section. The spreading of the large compressive forces creates transverse tension forces that must be considered in …

    unr Repository record for Performance and Design of Anchorage Zones for Post-Tensioned Box Girder Bridges (opens in a new tab)

  5. Shear and disturbed regions in high performance concrete bridges

    … maximum shear reinforcement. A key factor is the anchorage of the longitudinal reinforcement. (3) The horizontal wires of the orthogonal welded wire fabric have been found to be extremely effective to control shear cracking and increase the shear capacity. Based on the strut-and-tie model analysis …

    nebraska Repository record for Shear and disturbed regions in high performance concrete bridges (opens in a new tab)

  6. DESIGN & DEVELOPMENT OF HETEROTOPIC TRANSCATHETER TRICUSPID VALVES TO AMELIORATE TRICUSPID REGURGITATION

    … tricuspid valve anatomy and the lack of an anchorage zone. Thus, the next best anchorage zone is the vena cava. Placing the valves in the superior and inferior vena cava will prevent the back flow of blood into the venous structures and minimises the detrimental effect of reverse flow. The …

    nus Repository record for DESIGN & DEVELOPMENT OF HETEROTOPIC TRANSCATHETER TRICUSPID VALVES TO AMELIORATE TRICUSPID REGURGITATION (opens in a new tab) Download file for DESIGN & DEVELOPMENT OF HETEROTOPIC TRANSCATHETER TRICUSPID VALVES TO AMELIORATE TRICUSPID REGURGITATION (opens in a new tab)

  7. Investigation of transfer bond in pretensioned prestresses concrete members by an original method

    … fully the bond characteristics in the anchorage zones of pretensioned pre-stressed members. Conditions in one anchorage zone of a member are simulated, the central zone of constant stress being replaced by a rigid steel frame. Loads in the wire on either side of the specimen are …

    ubc Repository record for Investigation of transfer bond in pretensioned prestresses concrete members by an original method (opens in a new tab) Download PDF for Investigation of transfer bond in pretensioned prestresses concrete members by an original method (opens in a new tab)

  8. CFRP as Shear and End-Zone Reinforcement for Concrete Bridge Girders

    … of CFRP grid needed for reinforcement in the anchorage zone. This thesis concludes that NEFMAC grid is a viable shear design option and presents the initial recommendations for design methods. These methods provide a basis for the design of NEFMAC grid shear reinforcing that could be used as a …

    vt Repository record for CFRP as Shear and End-Zone Reinforcement for Concrete Bridge Girders (opens in a new tab)

  9. Shear database for prestressed concrete members

    … signs of horizontal shear damage and/or anchorage zone distress. The ACI 318-08 detailed method was found to be less conservative than the MCFT-based design expressions. Additionally, on the basis of a careful examination of test results included in the database, a new limit for the …

    texas Repository record for Shear database for prestressed concrete members (opens in a new tab)

  10. Effect of partial debonding of prestressing strands on beam end cracking

    … The effect of partial strand debonding on the anchorage zone of bridge girders was studied through numerical simulations within the context skew U-beam case study for which evidence of damage exists. The type of sheathing, flexible or rigid, and the effect of staggered distribution for debonded …

    msu Repository record for Effect of partial debonding of prestressing strands on beam end cracking (opens in a new tab)

  11. Αντοχή και ικανότητα παραμόρφωσης μελών οπλισμένου σκυροδέματος, με ή χωρίς ενίσχυση

    … to slippage of longitudinal reinforcement from anchorage zone, are also developed. Calculation of effective stiffness is based on two alternative models, one theoretical and one purely empirical. Deformation at ultimate is then examined where two methods for calculating chord rotation at …

    greece Repository record for Αντοχή και ικανότητα παραμόρφωσης μελών οπλισμένου σκυροδέματος, με ή χωρίς ενίσχυση (opens in a new tab)

  12. Fatigue Bond Behaviour of Corroded Reinforcement and CFRP Confined Concrete

    … ease of handling and application. Forty-seven anchorage-beam specimens were cast and tested. The specimens’ dimensions were 152 x 254 x 2000 mm reinforced with two 20M bars. The steel reinforcement in a specimen was unbonded except for 250 mm from each end. This bonded length was selected to …

    waterloo Repository record for Fatigue Bond Behaviour of Corroded Reinforcement and CFRP Confined Concrete (opens in a new tab)

  13. Essays on Maritime Transport and International Trade

    … or drift nearby. After observing a swelling of anchorage zone and drift areas use, authorities introduced a queuing system in which each vessel's calculated time of arrival determined their queue position and mandated no idling within a 150 nautical mile area of the ports. I find evidence which …

    oregon Repository record for Essays on Maritime Transport and International Trade (opens in a new tab)

  14. Monotonic and Fatigue Performance of RC Beams Strengthened with Externally Post-Tensioned CFRP Tendons

    … with no premature failure occurring at the anchorage zone. The fatigue tests suggested a fatigue limit of a stress range of 10% of the tendon ultimate capacity (approximately 216 MPa). Monotonic and fatigue experiments on twenty-eight beams (152x254x3500 mm) were then undertaken. Test …

    waterloo Repository record for Monotonic and Fatigue Performance of RC Beams Strengthened with Externally Post-Tensioned CFRP Tendons (opens in a new tab)

  15. Innovative use of UHPC in unbonded post-tensioned floor system

    … floor systems. Two unique focus areas, anchorage in unbonded post-tensioned (PT) slabs and composite UHPC-steel truss system for long-span floors, are identified and researched as part of this dissertation. In unbonded PT slabs and beams, the use of cast-in-place steel confined ‘UHPC …

    iastate Repository record for Innovative use of UHPC in unbonded post-tensioned floor system (opens in a new tab)

  16. Bond Behaviour of Corroded and CFRP Repaired RC Beams Subjected to Monotonic and Repeated Loading

    … This study investigated the effect of anchorage length and confinement from supports, stirrups and carbon fibre reinforced polymer (CFRP) on the bond behaviour of corroded and uncorroded reinforced concrete beams subjected to monotonic and repeated loading. Fifty-seven large-scale …

    waterloo Repository record for Bond Behaviour of Corroded and CFRP Repaired RC Beams Subjected to Monotonic and Repeated Loading (opens in a new tab)

  17. Rekonstrukce průmyslové budovy

    Diplomová práce se zabývá posouzením stávajících železobetonových předpjatých sedlových střešních vazníků proměnného I-průřezu v objektech D_06, D_07 a D_09 areálu DELIMAX Hodonín, původně navržených v roce 1979, a návrhem nového vazníku jako náhrady vybraných prvků. V práci je popsána geometrie …

    brno-tech Repository record for Rekonstrukce průmyslové budovy (opens in a new tab)