Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 11 of 11 for “"Anode effect"”.

  1. Anode current signals analysis, characterization and modeling of aluminum reduction cells

    … on these measurements. The uses of individual anode current signals, as additional measurements, to extract local cell information for detection of local abnormalities were investigated in this work. It has been found that changes of bubble behaviors occurring underneath individual anodes can …

    unsw Repository record for Anode current signals analysis, characterization and modeling of aluminum reduction cells (opens in a new tab)

  2. Causal Factors in the Variation of the Cell Voltage in Industrial Aluminium Smelting Cells

    … metal, changes in concentration of alumina and anode effect related variation. Altogether six causal factors were identified for the variation in the cell voltage. The list of the identified causes ranged from the material balance error like excessive addition of AlF3 to the control system error …

    auckland-ms Repository record for Causal Factors in the Variation of the Cell Voltage in Industrial Aluminium Smelting Cells (opens in a new tab)

  3. Minimising perfluorocarbon gas emissions caused by anode effects in aluminium smelting cells by applying quality control and industrial engineering principles to the process and work practices

    … of perfluorocarbons (PFC’s) emitted during anode effect (AE) in the aluminium electrolysis process as a major source and increasing in global aluminium production capacities, efforts to prevent and control AE have become very important. Much fundamental information on the initiating cause of …

    unsw Repository record for Minimising perfluorocarbon gas emissions caused by anode effects in aluminium smelting cells by applying quality control and industrial engineering principles to the process and work practices (opens in a new tab)

  4. On the Factors Affecting Alumina Dissolution in Industrial Reduction Cells

    … chemistry (Excess AlF3 concentration), and the anode changing operation. The anode covering operation was also found to impact alumina concentration significantly, without finding long-term impacts. It was also found that very detrimental feeder hole conditions such as a blocked feeder hole, …

    auckland-ms Repository record for On the Factors Affecting Alumina Dissolution in Industrial Reduction Cells (opens in a new tab)

  5. Modelling of bath/ledge heat transfer in Hall-Heroult cells

    … the smelting operation such as alumina feeding, anode changing, metal tapping and anode effect. Several studies have been carried out to investigate the ledge heat transfer. However, the reported heat transfer coefficients in the literature not only vary over a wide range of values but provide …

    auckland-ms Repository record for Modelling of bath/ledge heat transfer in Hall-Heroult cells (opens in a new tab)

  6. Evaluation of the Behaviour of Continuously Galvanized Rebar

    … to the base steel through its sacrificial anode effect, its corrosion products are soluble and do not crack the concrete, and it forms a stable protective film even in low pH concrete. However, its major drawback is the brittle and less corrosion resistant (than pure Zn) Fe-Zn intermetallic …

    waterloo Repository record for Evaluation of the Behaviour of Continuously Galvanized Rebar (opens in a new tab)

  7. Electrochemistry of systems containing aluminum phosphate dissolved in fused borate and phosphate mixtures

    … to the molten 5Na₂O.10Li₂O.6B₂O₃ has little effect on the fluid range up to 18.68 per cent by weight of aluminum phosphate. Because the fused electrolyte is very corrosive, its action on different containers was studied. These containers included those made of porcelain, nickel, ampco metal, …

    vt Repository record for Electrochemistry of systems containing aluminum phosphate dissolved in fused borate and phosphate mixtures (opens in a new tab)

  8. Ηλεκτροχημική συμπεριφορά και διαλυτότητα των τηγμένων αλάτων του νεοδυμίου

    Οι μέχρι σήμερα μέθοδοι παραγωγής του νεοδυμίου είναι αποδοτικές αλλά όχι βέλτιστες. Η κλασική μέθοδος παραγωγής του νεοδυμίου από αναγωγή του NdF3 με Ca είναι δαπανηρή. Το ίδιο ισχύει και για τη νεώτερη διαδικασία παραγωγής νεοδυμίου (αρχές της δεκαετίας του 80) από αναγωγή του Nd2O3 με Ca ή Na. Η …

    greece Repository record for Ηλεκτροχημική συμπεριφορά και διαλυτότητα των τηγμένων αλάτων του νεοδυμίου (opens in a new tab)