Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 1059 for “"Anodes"”.
-
SOLID-STATE PROTECTED LITHIUM ANODES
… in order to work towards practical lithium metal anodes. Firstly, common degradation mechanisms of lithium metal are reviewed in order to obtain a better understanding of the current problems. A study of possible stabilization mechanisms that could be effected in order to achieve long-term …
-
Electrochemical behaviour of platinum-iridium anodes
This thesis considers the electrochemistry of platinum-iridium electrodes in both sulphate- and chloride-containing electrolytes at 20 - 25°C. Both wire electrodes of appropriate alloy compositions and titanium-substrate electrodes were employed. Polarization curves were obtained, and a technique …
-
Silicon Anodes For Lithium-Ion Batteries
Silicon anodes are promising for high energy density lithium-ion batteries because of their high theoretical capacity (3579 mAh/g) and low potential of ~0.2 V vs. Li/Li+. However, silicon undergoes >300% volume changes during cycling. This causes delamination from the current collector and unstable …
-
Iron anodes for rechargeable alkaline batteries
… By conducting systematic studies on Fe anodes using cyclic voltammetry and a broad range of state of the art characterization tools, four distinct stages of Fe anode evolution were revealed: development, retention, fading and failure, where each stage is associated with very specific …
-
Electrochemical evaluation of anodes in lead electrowinning
<p>"The recovery of lead from scrap batteries using hydrometallurigical techniques requires a chemically stable and electrochemically attractive anode in the electrowinning step. A high reaction rate of oxygen evolution and a low generation of lead dioxide are necessary to ensure a satisfactory …
-
Polyviologen-modified anodes for carbohydrate biofuel cells
… three-dimensional carbon nanotube-modified GCE anodes, produced current densities up to 121.6 uA/cm2 in fuel cells with a Pt/Nafion film cathode and in 5 mM glucose 0.1 M KCl solution at pH 9.7. On carbon felt anodes, the copolymer produced currents up to 587.9 uA and powers up to 90.6 uW. …
-
Design of resilient silicon-carbon nanocomposite anodes
Si-based anodes have recently received considerable attention for use in Li-ion batteries, due to their extremely high specific capacity - an order of magnitude beyond that offered by conventional graphite anode materials. However, during the lithiation process, Si-based anodes undergo extreme …
-
ENGINEERED STRUCTURAL AND INTERFACIAL DESIGN OF CARBON-BASED MATERIALS FOR HIGH-ENERGY DENSITY LITHIUM METAL ANODES AND SILICON ANODES
… and stability of lithium metal and silicon-rich anodes.First, free-standing graphene (FSGr) and polypropylene-supported graphene (PPGr) electrodes were fabricated via an electrospray technique. The anode’s gravimetric capacity was significantly improved by eliminating the conventional copper …
-
Corrosion of lead anodes in metallic electrowinning environments
The corrosion of anodes in electrowinning is costly because of their relatively short lifespan, material cost, and their impact on cathodic deposit quality. The objective of this thesis was to understand the corrosion behavior of Pb anodes in electrolyte simulating Zn and Ni electrowinning …
-
Branched Nanostructured Anodes For Dye-Sensitized Solar Cells
… through, the porous structure of a TiO2 anodes. However, the convoluted conduction path for extracting photo-generated electrons through the sponge-like structure of conventional DSSC anodes has limited further improvement. This thesis is an investigation of thin film deposited TiO2 …
-
Ceramic-Based Anodes for Solid Oxide Fuel Cells
… LaGaO3 and LaCrO3-based systems can be potential anodes for SOFCs directly operating on sulfur-containing hydro-carbon fuels.
-
A study of photo anodes and oxygen evolution
The anodic photoelectrochemical behaviour of flame oxidised iron has been investigated. The transient photo current behaviour has been explained in terms of the creation and subsequent reduction of an oxy-hydroxy intermediate on the electrode’s surface. This has been supported by the results gained …
-
Self-healing strategies for lithium-ion battery anodes
U of I Only Restriction Lifted for Item 79869 on 2017-07-23T09:15:36Z.
-
Exploring plasma sheath solutions for planar and cylindrical anodes
… factors. Previous research regarding planar anodes is verified and expanded upon using greater parameter ranges. 'z', a dimensionless quantity specifying plasma composition and condition, groups diverse plasmas into 'families' exhibiting similar sheath characteristics. 'n', a nondimensional …
-
Design of composite foil anodes for lithium-ion batteries
… for use as high-capacity lithium-ion battery anodes. The core of the approach relies upon using severe plastic deformation to generate dense nanostructures containing multiple metallic phases with differing electrochemical activity. In the first chapter, a historical context is provided both …
-
Tin-based nanocomposite alloy anodes for lithium-ion batteries
… characterization of Sn-based lithium-ion battery anodes. SnSb-TiC-C and FeSn2-TiC nanocomposite alloy anodes for lithium-ion batteries have been synthesized by a mechanochemical process involving high-energy mechanical milling of Ti/Sn, Ti/M (M = Fe or Sb), and C. Characterization of the …
-
HIGHLY REVERSIBLE ZINC ANODES TOWARD PRACTICAL AQUEOUS ZINC BATTERIES
Aqueous zinc batteries show great promise for grid-scale energy storage due to their intrinsic safety and low cost. However, they are faced with problems including Zn dendrite growth and interfacial side reactions. The interfacial modification, electrolyte additives, and hydrogel electrolytes have …
-
TIN OXIDE BASED COMPOSITE ANODES FOR LITHIUM ION BATTERIES
Simple melt-quench procedures were used to prepare three tin based composite oxides (TCOs), namely amorphous Sn2P2O7, amorphous Sn2BPO6 and amorphous Sn2B2O5, which were subsequently investigated for their suitabilities as anode materials in rechargeable lithium ion batteries. Amorphous Sn2P2O7 and …
Page 1 of 53