Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 1438 for “"Anodic"”.
-
Anodic films on Bismuth
… the nucleation, growth and defect structure of anodic oxide films formed on bismuth in aqueous electrolytes. The early stages in the formation of continuous anodic layers of bismuth oxide were studied using the technique of cyclic voltammetry. During this period, the oxide, Bi2O3, covered the …
-
Anodic Oxidation of Pentaphenylcyclopentadienes
… of cathodic wave on scan reversal, equal anodic and cathodic peak currents, minor dependence of peak potentials on scan rate, v, and linearity of anodic peak current, ipa with the square root of scan rate, v^1/2 , corresponding to Randles-Sevcik equation for reversible processes.</p> <p> …
-
The anodic oxidation of gold
… was initiated to give more detailed data on the anodic process. The study included both the anodic and cathodic processes using galvanostatic and potentiostatic methods. An automatic following ellipsometer gave results both for the steady-state and for galvanostatic transients. In addition, …
-
The anodic oxidation of aluminum
Some characteristics of the process of anodic oxidation of aluminum at a constant current have been studied. Solid aluminum oxide layers were formed in ammonium citrate at a constant current and the voltage across, the layer and luminescence from the layer were studied. Spectral distribution of the …
-
Anodic oxide growth on tantalum
In the growth of anodic oxide films on tantalum, the ionic conduction at a given current density depends on the electrical history of the film. In this thesis, this history effect has been investigated by examining the frequency response of the high field ionic conduction process involved in the …
-
Conductive Anodic Filament (CAF) Formation
Conductive anodic filament (CAF) is a failure mode in printed wiring boards (PWBs) which occurs under high humidity and high voltage gradient conditions. The filament, a copper salt, grows from anode to cathode along the epoxy-glass interface. Ready and Turbini (2000) identified this copper salt as …
-
The anodic oxidation of metals
… Optical and electical measurements during the anodic oxidation of nickel have also been made: The results of these measurements indicate that the behavior of passive nickel is more complicated than that of passive iron. Electrical results show that the form of the equation relating the current …
-
Electronic processes in anodic A1₂O₃
… theory of electronic conduction through anodic oxide layers. Anderson's theory of oxide growth has been substantiated by oxidizing plates in an Oxalic acid solution and comparing the thicknesses of the oxide layers with their calculated thicknesses. The porosity of layers formed in Oxalic …
-
Ion Impat Phenomena in Anodic Oxides
… relating to sputtering coefficients of Kr on anodic oxides, high-dose depth distributions of Kr in Al2O3, Nb2O5, and WO3, and amorphization in crystalline WO3.</p> <p>The comparison of the experimental sputtering data with Sigmund's theory permits the surface binding energy to be estimated. …
-
Variation of thickness of hard anodic films
… processing conditions on the thickness of anodic films produced by the Martin Hard Coat (4) process on commercially pure aluminum and nine aluminum alloys.</p><p>This study was conducted to provide sufficient data for designing coating thicknesses on aircraft accessory parts that would …
-
A study of the anodic oxidation of zinc
Electronic Thesis or Dissertation
-
A study of the anodic oxidation of vanadium
Electronic Thesis or Dissertation
-
Glass-glass anodic bonding using hydrogenated amorphous silicon
… hydrogenated amorphous silicon in glass-to-glass anodic bonding. Anodic bonding is a field assisted, low temperature heterogeneous glass-to-silicon bonding. With a suitable intermediate layer, homogeneous glass-to-glass bonding has been an important microfabrication steps in MEMS applications, …
-
Selectivity determination of anodic electrocatalysts for seawater electrolysis
Hydrogen production from seawater electrolysis has the potential to revolutionize the green energy industry. However, it suffers from a multitude of issues, such as the salts and compounds in seawater damaging the catalysts and electrolyzer components. In particular, corrosive hypochlorite formed …
-
Anodic oxidation of cuprous sulphide in aqueous solutions
The oxidation of artificial cuprous sulphide electrodes (Cu/S ratio = 1.93) was studied in acidified copper sulphate solutions in the temperature range 20 to 35° C. Rest potential measurements gave V° = 0.490 volts for the electrode or half cell potential. This is within the limits of accuracy of …
Page 1 of 72