Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 27 for “"Anodic bonding"”.
-
Glass-glass anodic bonding using hydrogenated amorphous silicon
… hydrogenated amorphous silicon in glass-to-glass anodic bonding. Anodic bonding is a field assisted, low temperature heterogeneous glass-to-silicon bonding. With a suitable intermediate layer, homogeneous glass-to-glass bonding has been an important microfabrication steps in MEMS applications, …
-
The Creation of an Anodic Bonding Device Setup and Characterization of the Bond Interface Through the Use of the Plaza Test
… this work was to create a lab setup capable of anodically bonding 4” diameter wafers, and to characterize the bond formed using the Plaza test chip so that microfluidic devices using glass and silicon as substrates could be created. Two stainless steel electrodes placed on top of a hot plate …
-
Design optimization of a microelectromechanical electric field sensor using genetic algorithms
… in-house with a silicon-on-glass process, an anodic bonding apparatus has been designed, built, and tested.
-
Sequentially Plasma Activated Bonding for Wafer Scale Nano-Integration
<p>Sequentially plasma activated bonding (SPAB) of silicon wafers has been investigated to facilitate chemical free, room temperature and spontaneous bonding required for integration of nanostructure on the wafer scale. The SPAB consists of surface activation using reactive ion etching (RIE) plasma …
-
Micromachining process for microsensor fabrication
… equipments housed at the Maddox Laboratory. Bonding process is new and a tailored anodic bonding system has been self-built. Bonding between Si/Si, Si/Glass, and Glass/Glass wafer pairs can be done using these tools. Channels are made in silicon and glass substrate. A bulkmicomachinined …
-
Novel design of a passive microfluidic mixer for biochemical reactions and biosensing
… on silicon and bonded with pyrex glass by anodic bonding. To test the actual device mixing efficiency, we used a fluorescent dye rhodamine B solution to mix with DI water and put the devices under fluorescent microscope observations for real-time analysis. Images of fluorescent light …
-
Cold atoms in your pocket -Enabling technologies-
… planar microfabrication techniques, such as anodic bonding and eutectic bonding, as a solution for providing hermetic seals. Several partially working devices i.e miniaturised vacuum chambers with rubidium atom sources are presented and compared to commercial rubidium cells. As ultimately our …
-
The Design and Fabrication of a Microfluidic Reactor for Synthesis of Cadmium Selenide Quantum Dots Using Silicon and Glass Substrates
… a diamond-tip drill bit. The Pyrex wafer was anodically bonded to the etched silicon wafer to enclose the microfluidic reactor. Conditions for anodic bonding were created by exposing the stacked substrates to 300V at ~350oC under 5.46N of force. A syringe containing a room temperature CdSe …
-
Design and Fabrication of Nanofluidic Systems with Integrated Sensing Electrodes for Rapid Biomolecule Characterization
… and used to cap the nanochannel chip through anodic bonding. The completed nanofluidic system was tested successfully for flow patency by pumping Fluorescein Isothiocyanate (FITC) through the nanochannel. The average flow rate in the nanochannel was estimated by monitoring the displacement of …
-
A silicon micromachined subminiature condenser microphone : analysis, design, fabrication and testing
… contain the airgap and side volume cavity. An Anodic bonding technique is used to bond the silicon membrane with the backplate. The silicon diaphragm is used as the moving electrode and the Pyrex glass backplate is made into a back electrode by a thin deposition of metal on it
-
Fabrication and characterization of a peristaltic micropump for use in medical drug delivery systems
… glass wafer used to seal the chambers. Selective anodic bonding was employed to allow for free movement of the membranes and inlet and outlet valves. The inlet and outlet valves are comprised of silicon mesas at the center of each pump chamber that make contact with and seal inlet and outlet ports …
-
Design and Fabrication of Multi – Dimensional RF MEMS Variable Capacitors
… up state and 27 in the down state. An improved anodic bonding technique to bond high resistivity Si substrate and low alkali borax glass substrate that finds potential application towards packaging of MEMS varactors is investigated. To facilitate the packaging of the varactors the temperature is …
-
3-D Bio-inspired Microenvironments for In Vitro Cell Migration
… from silicon structures to glass following anodic bonding and high temperature glass re-flow processes. Silicon is etched back thoroughly via wet etching and the glass is used as master device to create 3-D PDMS structures for use in dielectrophoresis cell sorting applications. Furthermore, …
-
The Use of Nanostructures in Bioelectronics
… reactive ion etching, electroplating and anodic bonding. These techniques have been used either to directly fabricate a working device or as donor processes for mechanical pattern transfer technology. The mechanical pattern transfer fabrication process developed for biological applications …
-
Evaluation of a Silicon Carbide Stiffening Layer for Silicon-on-Glass Thin-Film Transistors
… silicon layers onto glass substrates using an anodic bonding process to create the required substrates for the fabricating of single crystal silicon thin-film transistors (TFTs). The first TFTs made at RIT with SiOG showed promising results: they operated symmetrically in NFET and PFET modes, …
-
Design and Fabrication of Nanofluidic Systems for Biomolecule Characterizations
… off by a matching silicon capping piece using anodic bonding. Fluidic connectors are then attached to the inlet and outlet openings to complete the fabrication process. The relationship between the nanolithography parameters of the AFM and the resultant nanochannel dimensions was investigated …
-
Enhanced mass transport in graphene nanofluidic channels
… wet transfer, graphene patterning and vacuum anodic bonding is developed to create such graphene nanochannels with heights ranging from 24 to 124 nm. Using these nanochannels and a new hybrid nanochannel based capillary flow measurement technique, we successfully measured the hydraulic …
-
A micro capacitive pressure sensor with two deformable electrodes : design, optimization and fabrication
… before forming a sealed chamber using anodic bonding. Using a hydrostatic pressure system, a probe station and capacitance measuring instruments, the device is characterized. Experimental results demonstrate that the proposed device is able to provide enhanced sensitivity to small …
-
Development of a micromachined electrostatically suspended gyroscope
… using a triple-stack glass-silicon-glass anodic bonding in combination with a high-aspect-ratio DRIE process. Fabrication results and processing issues were discussed. However, it was found that the rotor of the fabricated gyroscopes was stuck to the substrate. Therefore, a fabricated …
Page 1 of 2