Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 44 for “"Anodic oxide"”.

  1. Anodic oxide growth on tantalum

    In the growth of anodic oxide films on tantalum, the ionic conduction at a given current density depends on the electrical history of the film. In this thesis, this history effect has been investigated by examining the frequency response of the high field ionic conduction process involved in the …

    ubc Repository record for Anodic oxide growth on tantalum (opens in a new tab) Download PDF for Anodic oxide growth on tantalum (opens in a new tab)

  2. Anodic oxide films on titanium in acidic media

    <p>The properties of thin (less than 10 nm) anodic oxide films formed on titanium have been investigated. Particular attention was paid in this study to the spontaneous open-circuit passive-active transition that the oxide films are known to undergo in acidic media. The mechanism leading to this …

    soton Download PDF for Anodic oxide films on titanium in acidic media (opens in a new tab)

  3. Anodic oxide rear contact schemes for silicon solar cells

    … with a special focus on the formation of anodic oxide dielectric layers and patterning of these layers. An initial study explored the effects of patterning by laser and chemical etching on the properties of local back surface fields (LBSF) regions formed by aluminium alloying. Chemical …

    unsw Repository record for Anodic oxide rear contact schemes for silicon solar cells (opens in a new tab)

  4. The colouring, sealing and abrasion resistance of anodic oxide coatings

    … and sealing processes. The quality of the anodic oxide film is determined by assessment tests. The use of a nitric acid ‘predip’ on soft films was shown to dissolve a soft outerlayer. A new admittance test was devised in which the ‘drift’, Y, was measured using 33%, nitric acid. This test …

    london-metro Download PDF for The colouring, sealing and abrasion resistance of anodic oxide coatings (opens in a new tab)

  5. Formation, Structure and Composition of Anodic-Oxide Films on Beryllium

    <p>The formation, structure and composition of anodic-oxide films on Be is investigated. According to the choice of electrolyte, porosity, dissolution and crystallinity can be varied almost at will for the formed anodic films. Also the procedure for the anodic sectioning of Be is described and …

    mcmaster Repository record for Formation, Structure and Composition of Anodic-Oxide Films on Beryllium (opens in a new tab)

  6. Ionic conduction at high fields in anodic oxide films on tantalum

    … was applied to the study of nonuniform anodic oxide films resulting from electrolyte incorporation into the oxide on growth. Ellipsometry results obtained in air and in situ on oxides formed on Ta in phosphoric acid are consistent with the results of tracer studies in which the oxide …

    ubc Repository record for Ionic conduction at high fields in anodic oxide films on tantalum (opens in a new tab) Download PDF for Ionic conduction at high fields in anodic oxide films on tantalum (opens in a new tab)

  7. The structure and some electrical properties of anodic oxide layers on aluminium

    The structure and electrical properties of porous oxide layers on aluminium have been studied with special reference to the operation of a capacitance-resistance hygrometer. A review of the literature on the structure is followed by a consideration of investigations with the electron microscope. A …

    london-metro

  8. The role of stress in self-ordered porous anodic oxide formation and corrosion of aluminum

    … near room temperature is significant in porous anodic oxide (PAO) films, charging of lithium batteries and stress-corrosion cracking (SCC). As this phenomenon is poorly understood, fundamental insight into flow from our work may provide useful information for these problems. In-situ monitoring …

    iastate Repository record for The role of stress in self-ordered porous anodic oxide formation and corrosion of aluminum (opens in a new tab)

  9. The Thermal Stability of Anodic Oxide Coatings - Strength and Durability of Adhesively Bonded Ti-6Al-4V Alloy

    … time. The bond fails increasingly in the oxide coating with increasing treatment temperature and time of treatment. Surface analysis results for debonded specimens suggest that the process leading to failure is the formation of fluorine-containing materials within the oxide, which weakens …

    vt Repository record for The Thermal Stability of Anodic Oxide Coatings - Strength and Durability of Adhesively Bonded Ti-6Al-4V Alloy (opens in a new tab)

  10. Experimental and modeling studies of formation of self-organized porous anodic oxide layers and intergranular corrosion of steel

    … mechanism for the self-ordering of porous anodic alumina (PAA). Anodizing of aluminum in electrolytes that dissolve the oxide produces PAA. For specific ranges of anodic potentials and solutions, uniform self-ordered hexagonally arranged PAA with diameters 10-400 nm are formed. A universal …

    iastate Repository record for Experimental and modeling studies of formation of self-organized porous anodic oxide layers and intergranular corrosion of steel (opens in a new tab)

  11. The stability of anodic oxide films on gold and the difference between their interfacial capacitance and that at the Au-metal surface

    … e.g. at Au or Pt, into the potential region of oxide-film formation. Voltammetry and impedance spectroscopy provide direct information on Cdl values determined at unoxidized, i.e. metallic, Au surfaces compared with those of anodic oxide films generated potentiostatically to various extents that …

    ottawa-retro Repository record for The stability of anodic oxide films on gold and the difference between their interfacial capacitance and that at the Au-metal surface (opens in a new tab)

  12. Characterization of Aluminum Surfaces: Sorption and Etching

    … comprised of aluminum anode foil covered by an anodically grown aluminum oxide dielectric film, electrolytic paper impregnated with electrolyte, and aluminum cathode foil. Two main processes are involved in the fabrication of aluminum electrolytic capacitors, namely etching and anodic oxide …

    uiuc Repository record for Characterization of Aluminum Surfaces: Sorption and Etching (opens in a new tab)

  13. Hard Anodizing

    Thick anodic oxide films were produced on aluminium using the sulphuric acid hard anodizing process. Low acid concentrations, low temperatures, high current densities and short processing times minimised oxide dissolution and gave the least porosity. Scanning electron microscopy and potential-time …

    aston Repository record for Hard Anodizing (opens in a new tab) Download PDF for Hard Anodizing (opens in a new tab)

  14. Anodic films on single phase Ni-Mo alloys in acid solution

    <p>The anodic oxide films of single phase Ni-Mo alloys (5-15 wt % Mo) formed in 0.15 N Na₂SO₄ (pH 2.8) have been investigated using electrochemical techniques, atomic absorption spectroscopy, Auger electron spectroscopy and X-ray photoelectron spectroscopy. The anodic oxide film of Ni formed under …

    mcmaster Repository record for Anodic films on single phase Ni-Mo alloys in acid solution (opens in a new tab)

Page 1 of 3