Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 31 for “"Anodic potential"”.
-
Study of Copper Electrodeposition on Ruthenium Oxide Surfaces and Bimetallic Corrosion of Copper/Ruthenium in Gallic Acid Solution
… reversible oxide was formed at lower anodic potential region, and irreversible oxides were formed at higher anodic potential region. In this study, we were focusing on the effect of copper electrodeposition on each type of oxides. From decreased charge of anodic stripping peaks and …
-
Anodic dissolution of uranium dioxide in simple electrolyte solutions and simulated groundwaters
The anodic dissolution of UO$\sb2$ has been studied in NaClO$\sb4$ NaCl, Standard Canadian Shield Saline Solution (SCSSS) and SCSSS + HCO$\sb3\sp-$ solutions using potentiostatic and cyclic voltammetry techniques. Under potentiostatic conditions two oxidation/dissolution regions were observed. Over …
-
Alternative Anodes for the Electrolytic Reduction of Uranium Dioxide
… was found to be sufficiently stable at the anodic potential required for electrolysis of uranium dioxide in molten salt. The tungsten anode and stainless steel alloy 316 cathode electrode system was studied at the required reduction potential for UO2 with varying lithium oxide …
-
Exploring De-alloying in Fe-Ni-Cr Alloys and its Relationship to Stress Corrosion Cracking in Nuclear High Temperature Water Environments
… concurrent MN dissolution and, at open circuit potential (OCP), the layers retained significant Fe and Cr (LN) instead of being ‘almost pure’ MN. Layers formed with applied anodic potential were friable and highly LN depleted. This behaviour was successfully modelled in Kinetic Monte Carlo …
-
Chronoamperometric Study of Conformational Relaxation in PPy(DBS)
… During oxidation and reduction (stepping to the anodic and cathodic voltages, respectively), an exponentially decaying current is observed, but a shoulder appears during reduction when the cathodic voltage is high enough. Subtracting an exponential curve fit from the reduction current yields a …
-
Homogeneous catalytic oxidation of ammonia under mild conditions
… is plagued by relatively high oxidation overpotentials. Such requirements for an extra energy input are often caused by the sluggish kinetics associated to the multi-electron, multi-proton nature of the oxidation of ammonia to dinitrogen (N2). A molecular catalyst added homogeneously to the …
-
ELECTROCATALYTIC WATER OXIDATION BY METAL ORGANIC FRAMEWORKS
… EXTRAORDINARY ACTIVITY. THE CATALYTIC ONSET OVERPOTENTIAL OF CO(BTC) IS 400 MV AND THE STABILITY OF CO(BTC) LASTS AS LONG AS 75 MIN AT A 0.5 MA/CM2 CURRENT DENSITY UNDER ANODIC POTENTIAL OF 1.1 V. ITS STRUCTURE AND MORPHOLOGY WERE STUDIED BY XRD AND SEM. IN ADDITION, CO(TP) MOF WAS MODIFIED USING …
-
Aqueous corrosion and environmentally assisted cracking characteristics of iron aluminides
… solution. To investigate the effect of applied potential on the cracking behavior, U-bend tests were conducted in the acid-chloride solution at an anodic pitting potential and at cathodic hydrogen-evolution potentials. Cracking occurred only at the highly negative cathodic potentials. These …
-
Synthesis and characterization of size-selected platinum clusters through scanning transmission electron microscopy and electrochemical methods
… which revealed a performance benefit with potential conditioning. Ex-situ imaging reveals that cluster migration and coalescence is affected by the anodic potential limit of the conditioning procedure. The results in this thesis have implications for the design and stability of future …
-
Ion-Exchange Properties Of Chemically And Physically Modified Graphite.
… graphite was shown to be pH dependent. An anodic potential applied to the oxidized graphite was shown to be effective in increasing the apparent rate of exchange of Na('+) for adsorbed Cu('+2).
-
Understanding the wear and tribocorrosion processes and mechanisms of titanium alloys in bovine serum solution
… at 300oC (βω alloy) over wear tests at cathodic potential (–1 V vs OCP), open circuit potential and anodic potential (0.3 V vs OCP) at 0.5N, 1N and 2N normal load to understand the mechanisms and phenomena that occur when composition and production procedures change as a result of wear in a body …
-
Modification of stainless steel surfaces for advanced functionalities
… surface, and a correlation between the applied anodic potential and SS316L surface topography was founded, which was served as a basis to develop advanced functionalities. A two-step electrochemical etching was performed to develop micro and nanoscale hierarchical structure on SS316L surface, …
-
Complexos de ferro e manganês com derivados da base de Schiff salen e ligantes carboxilatos
… caused an increase in difference of the cathodic potential and the anodic potential of the metal. In the TG and DTG curves have been observed the decomposition of the carboxylate ligand at around 262°C and the other two losses attributed to Schiff's base.
-
Interconversion of nickel hydroxides studied using dynamic electrochemical impedance
… of Ni(OH)₂ formed increased with increasing anodic potential. After α-Ni(OH)₂ was formed (< 0.5 V), it was easily reduced by sweeping down to -0.15 V. However, sweeping further (> 0.5 V) resulted in its "irreversible" conversion to β-Ni(OH)₂. Since β-Ni(OH)₂ was not reduced by sweeping to …
-
Tribo-electrochemical Characterization of Tantalum during Electrochemical-Mechanical Polishing (ECMP)
… process was strongly dependent of the applied anodic potential, thickness of the oxide layer, mechanical forces, and surface orientation. A polymer environmental cell was designed and produced. Using this cell and AFM, it was found that the material removal in the nanometer scale was a function …
-
Corrosion Behaviour of Electrodeposited Nanocrystalline Nickel (Ni) and Nickel-Iron (NiFe) Alloys Compared to their Polycrystalline Coarse-Grained Counterparts
… oxidizing conditions (i.e. increased anodic potential, increased pH), whereby the contribution of sulfur impurities (present in higher concentration in the nanostructured materials) was minimized. The consideration of other microstructural factors, in addition to grain size reduction, …
-
Electrochemical study of gold thiosulfate extraction process
… mine in Nevada, USA. However, there is still potential for technical improvements to achieve higher process efficiency. The purpose of this study is to examine gold thiosulfate leaching chemistry and to suggest strategies to improve gold extraction efficiency. In the current work, addition of …
-
Investigation of electrochemical methods for applications in pharmaceutical synthesis
… to apply a precise oxidative or reductive potential directly to an organic substrate can provide new and innovative reaction manifolds that are inaccessible via traditional chemical means. Benzylic oxidation was initially targeted as an area where electrochemistry could overcome the need …
-
Corrosion fatigue and pitting behaviour of duplex stainless steels in chloride solutions
… The pitting studies showed that the pitting potentials and the preferential pitting of the ferrite or austenite phases were dependent upon partitioning of the elements Cr,Mo and N between the two phases. Alloying considerations leading to improved pitting resistance were discussed and it was …
-
Electrochemical characterization of bimetallic thin films and semiconductor interfaces for advanced sensing applications
… the influence of Au substrate crystallinity and anodic potential range on Pd oxide formation and hydrogen uptake in Pd/Au thin films. Results revealed that substrate structure and oxidative pre-treatment significantly modulate PdOx layer characteristics and hydrogen incorporation, as observed …
Page 1 of 2