Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 20 for “"Aqueous Battery"”.

  1. Self-discharge of Rechargeable Hybrid Aqueous Battery

    … of recently developed rechargeable hybrid aqueous batteries, using LiMn2O4 as a cathode and Zinc as an anode. It is shown through a variety of electrochemical and ex-situ analytical techniques that many parts of the composite cathode play important roles on the self-discharge of the …

    waterloo Repository record for Self-discharge of Rechargeable Hybrid Aqueous Battery (opens in a new tab)

  2. Nanocarbon-containing High Power Cathode for Rechargeable Hybrid Aqueous Battery

    Aqueous batteries have been considered to be one of the most suitable large-scale energy storage systems that require excellent safety, low cost and high power. A new secondary aqueous Zn/LiMn2O4 battery system, called Rechargeable Hybrid Aqueous Battery (ReHAB), has been developed by our group …

    waterloo Repository record for Nanocarbon-containing High Power Cathode for Rechargeable Hybrid Aqueous Battery (opens in a new tab)

  3. A “cathode-less” Zn-MnO2 aqueous battery: from cm- to μm-scale

    … in the electrolyte to construct a micro-scale aqueous battery based on the Zn2+/Zn0 reaction at the anode and the Mn(IV)/Mn(II) conversion at the cathode. This “cathode-less” battery chemistry arouses power supply applications “everywhere” by casting conductive ink on different substrates. …

    qucosa-diss

  4. Temperature dependent transport properties of aluminum chloride in thionyl chloride solutions: A non-aqueous battery electrolyte study.

    This thesis is a physical chemical study of the AlCl$\sb3$/SOCl$\sb2$ system. Conductivity, viscosity, and density were determined for AlCl$\sb3$ concentrations ranging from 0 to 35 weight percent in SOCl$\sb2$, and over the temperature range $-$35 to 20$\sp\circ$C. The measured conductivity was in …

    ottawa-retro Repository record for Temperature dependent transport properties of aluminum chloride in thionyl chloride solutions: A non-aqueous battery electrolyte study. (opens in a new tab)

  5. Reduced Graphene Oxide as Artificial Solid Electrolyte Interphase for Anodes of Aqueous Lithium Energy Storage Systems

    Rechargeable Aqueous Hybrid Battery (ReHAB) systems offer several advantages over the commercially available non-aqueous battery systems. The most noteworthy advantages include higher ionic conductivity, added safety, and more environmentally friendliness. However, the ReHAB exhibits faster …

    waterloo Repository record for Reduced Graphene Oxide as Artificial Solid Electrolyte Interphase for Anodes of Aqueous Lithium Energy Storage Systems (opens in a new tab)

  6. Continuum Modeling of Two Battery Systems: Lithium-Sulfur and Rechargeable Hybrid Aqueous Cells

    … for understanding the mechanisms of a working battery. This thesis develops continuum mechanics models for two battery systems: lithium-sulfur (Li-S) and rechargeable hybrid aqueous battery (ReHAB). In both models, continuous partial differential equations and the Butler-Volmer equation are …

    waterloo Repository record for Continuum Modeling of Two Battery Systems: Lithium-Sulfur and Rechargeable Hybrid Aqueous Cells (opens in a new tab)

  7. THE APPLICATION OF IRON-BASED MATERIALS IN AQUEOUS ENERGY STORAGE

    Aqueous energy storage has been an important part of battery research for its cost-effective, environmentally benign, and robust nature. Iron-based materials, including iron hydroxides and iron oxides, are widely investigated as electrode materials for their extremely low cost and sufficient …

    unh-thes Repository record for THE APPLICATION OF IRON-BASED MATERIALS IN AQUEOUS ENERGY STORAGE (opens in a new tab)

  8. Iron-Based Electrochemical Energy Conversion and Storage

    … for low-cost electrical energy storage in Fe-ion aqueous batteries. Thermoelectrics are suited to converting dissipated heat into electricity for operating electronics, but the small voltage (~0.1 mV/K) from the Seebeck effect has been problematic. An approach with thermo-hydro-electrochemical …

    tamu Repository record for Iron-Based Electrochemical Energy Conversion and Storage (opens in a new tab)

  9. Polyethylene Glycol as an Electrolyte Additive for Rechargeable Hybrid Aqueous Batteries

    … it to the grid during high demand periods. Aqueous metal ion batteries are a strong contender for energy storage from renewable power sources due to their excellent safety, low cost, and environmental friendliness. In 2012, our research team developed the Rechargeable Hybrid Aqueous Battery …

    waterloo Repository record for Polyethylene Glycol as an Electrolyte Additive for Rechargeable Hybrid Aqueous Batteries (opens in a new tab)

  10. Long Cycle-Life Aqueous Batteries Enabled by Organic Electrode Materials

    … deployment of a reliable energy storage system. Aqueous batteries with the merits of safety, low-cost, fast charge-discharge ability, and environmental friendliness, are one of the most competitive technologies for large-scale energy systems. However, their utilization is limited by their short …

    houston Repository record for Long Cycle-Life Aqueous Batteries Enabled by Organic Electrode Materials (opens in a new tab)

  11. Water-Soluble Redox Materials and Their Applications in Aqueous Batteries

    … due to the safety (using the non-combustible aqueous electrolytes) and cost-effectiveness (low-cost separators and aqueous electrolyte salts), aqueous batteries are focused in terms of electrocatalyst design for optimising the aqueous redox reaction, development of novel aqueous battery …

    unsw Repository record for Water-Soluble Redox Materials and Their Applications in Aqueous Batteries (opens in a new tab)

  12. Synthesis of Novel Zinc Anode via Electroplating for Rechargeable Hybrid Aqueous Batteries

    … a higher manufacturing cost than would be with aqueous electrolytes. Therefore, these issues can be solved by replacing the organic electrolytes with aqueous electrolytes. Among the many types of lithium-ion batteries with aqueous electrolytes, Rechargeable Hybrid Aqueous Battery (ReHAB) was …

    waterloo Repository record for Synthesis of Novel Zinc Anode via Electroplating for Rechargeable Hybrid Aqueous Batteries (opens in a new tab)

  13. Development of a new cathode for aqueous rechargeable batteries : a thesis presented in partial fulfilment of the requirements for the degree of Doctor of Philosophy in Chemistry at Massey University, Palmerston North, New Zealand

    … of this project was to develop a non/metal based battery electrode specifically for stationary battery systems. This study presents fundamental concepts required to form a rechargeable electrochemical storage device utilising hydrogen peroxide as the electroactive species. This involved two key …

    massey Repository record for Development of a new cathode for aqueous rechargeable batteries : a thesis presented in partial fulfilment of the requirements for the degree of Doctor of Philosophy in Chemistry at Massey University, Palmerston North, New Zealand (opens in a new tab)

  14. DESIGN OF ENERGY SYSTEMS AND FUNCTIONAL MATERIALS FOR SOFT MACHINES

    … vehicles (UUVs) by showcasing the use of an aqueous battery for a high capacity jellyfish robot. In this part, I demonstrate the use of redox flow batteries (RFBs) configured to comply with shape, size, and mobility requirements associated with the jellyfish architecture with particular focus …

    cornell Repository record for DESIGN OF ENERGY SYSTEMS AND FUNCTIONAL MATERIALS FOR SOFT MACHINES (opens in a new tab)

  15. Mathematical Modeling of Rechargeable Hybrid Aqueous Batteries

    A rechargeable hybrid aqueous battery (ReHAB) system was recently developed by our research group. It has been improved via different experimental approaches, but nobody yet has tried to use mathematical modeling techniques to further understand the system. This thesis tries to investigate the …

    waterloo Repository record for Mathematical Modeling of Rechargeable Hybrid Aqueous Batteries (opens in a new tab)

  16. Novel anion-involved chalcogen conversion chemistries for aqueous multivalent metal batteries

    … large-scale energy storage for a stable supply. Aqueous multivalent metal batteries (AMMBs) are highly promising for large-scale energy storage due to their low cost, inherent safety, and sustainability. While numerous progresses have been made in multivalent metal anodes in recent years, …

    qucosa-diss

  17. DEVELOPMENT OF QUINONE-POSITIVE ELECTRODE MATERIALS FOR AQUEOUS RECHARGEABLE ZINC-ION BATTERIES

    … of power production. For this purpose, aqueous rechargeable zinc-ion batteries are an attractive option due to the safety of their aqueous electrolyte and the abundance of non-toxic zinc. Regardless of the extensive research around zinc-ion batteries, they still face technological …

    mcmaster Repository record for DEVELOPMENT OF QUINONE-POSITIVE ELECTRODE MATERIALS FOR AQUEOUS RECHARGEABLE ZINC-ION BATTERIES (opens in a new tab)

  18. Electrowinning of Zinc for the Anode of Rechargeable Hybrid Aqueous Batteries (ReHABs)

    A rechargeable hybrid aqueous battery (ReHAB) system has recently been developed by our research group. In order to improve the anode material, electrowinning technique has been introduced to produce four different types of Zn anodes with various combinations of additives Bi, In, thiourea and …

    waterloo Repository record for Electrowinning of Zinc for the Anode of Rechargeable Hybrid Aqueous Batteries (ReHABs) (opens in a new tab)

  19. Carbon Suspension Electrodes for Multiscale Electrochemical Engineering of Aqueous Zinc Metal Batteries

    … energy density, and versatility for different battery chemistries. Additionally, the uniform dispersion of carbon particles within the electrolyte creates a percolation network that significantly boosts both ionic and thermal conductivity. This thesis explores the application of carbon …

    unsw Repository record for Carbon Suspension Electrodes for Multiscale Electrochemical Engineering of Aqueous Zinc Metal Batteries (opens in a new tab)