Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 206 for “"Asperity"”.

  1. Thermomechanical analysis of rock asperity in fractures of enhanced geothermal systems

    … roughness with varying heights which is called asperity. The stability of asperity determines fracture aperture and hence imposes substantial effect on hydraulic conductivity and heat transfer efficiency in EGS.</p> <p>Firstly, two rough fracture surfaces are characterized by statistical method …

    must-thes Repository record for Thermomechanical analysis of rock asperity in fractures of enhanced geothermal systems (opens in a new tab)

  2. The Asperity-deformation Model Improvements and Its Applications to Velocity Inversion

    … stiffness. Thus, the model is known as the ?asperity-deformation? (ADM) or ?bed-of-nails? (BNM) model. Existing analytic solutions include one that assumes the host rock is infinitely more rigid than the fractures, and one that takes the host-rock compliance into account. Inversion results …

    tamu Repository record for The Asperity-deformation Model Improvements and Its Applications to Velocity Inversion (opens in a new tab)

  3. Microscopic wear of polymers : microscratching simulations of asperity-surface interactions and debris generation

    … to simulate the interaction of a single asperity of the counter face with the polymer surface. The hard asperity geometry is simulated with both, silicon cubic corner and sapphire conical microscratching tips. In addition, in order to represent the varied motion of such a asperity over a …

    unsw Repository record for Microscopic wear of polymers : microscratching simulations of asperity-surface interactions and debris generation (opens in a new tab)

  4. Evolution of Fault Strength from Microscopic Asperity Scale to Macroscopic Fault Zone Scale

    … describes how shear resistance evolves at the asperity scale as a result of distributed deformation over a weak layer that grows during the brief lifetime of each asperity contact. The model predicts that after the initial rate-weakening stage, the friction becomes rate-strengthening. A …

    oregon Repository record for Evolution of Fault Strength from Microscopic Asperity Scale to Macroscopic Fault Zone Scale (opens in a new tab)

  5. Finite element based modeling of multi-asperity contact and validation of Greenwood-Williamson model

    … this model is often cited as it is ignoring of asperity interaction effects. This thesis aims to validate the Greenwood-Williamson model by using the finite element method to study multi-asperity contact and asperity interaction effects. The first step in the study of multi-asperity contact was …

    uiuc Repository record for Finite element based modeling of multi-asperity contact and validation of Greenwood-Williamson model (opens in a new tab)

  6. Investigating the Evolution of Rock Discontinuity Asperity Degradation and Void Space Morphology under Direct Shear

    … prior studies have attempted to investigate asperity failure mechanisms, they have been hampered by the lack of appropriate visualization and modelling tools. In particular, until recently it was not possible to observe asperity damage without physically separating the joint specimen or …

    toronto-retro Repository record for Investigating the Evolution of Rock Discontinuity Asperity Degradation and Void Space Morphology under Direct Shear (opens in a new tab)

  7. Interrogation of Single Asperity Electrical Contacts Using atomic force Microscopy With Application to Nems Logic Switches

    Energy consumption by computers and electronics is currently 15% of worldwide energy output, and growing. Aggressive scaling of the fully-electronic transistor, which is the fundamental computational element of these devices, has led to significant and immutable energy losses. Ohmic …

    penn Repository record for Interrogation of Single Asperity Electrical Contacts Using atomic force Microscopy With Application to Nems Logic Switches (opens in a new tab)

  8. Evolution of asperity contacts during shear failure on frictional interfaces: implications for the initiation of crustal earthquakes

    Fault zones and associated slip play a key role in the development of structures within the Earth's upper crust. Fault activity controls crustal-scale fluid flow and fault movement is crucial in the accommodation of strain. Although fault slip is broadly classified as brittle-frictional …

    anu Repository record for Evolution of asperity contacts during shear failure on frictional interfaces: implications for the initiation of crustal earthquakes (opens in a new tab)

  9. Investigation into the stress assisted damage of copper surface under single asperity: influence of contact pressures, surfaces stress states and environments

    … setup on a well-polished copper sample. Single asperity contact was investigated using the cantilever tip of an Atomic Force Microscope. Controlled tip contact pressures were applied on the copper surface to mechanically stimulate the stressed surface. The experiment was performed in different …

    iastate Repository record for Investigation into the stress assisted damage of copper surface under single asperity: influence of contact pressures, surfaces stress states and environments (opens in a new tab)

  10. Single Asperity Fretting Corrosion of Traditional and Additively Manufactured Metallic Biomaterials: Quantitative Analysis from Acetabular Tapers to Micron and Nanometer Scale Tribocorrosion

    … a single, inert, micron- to nano-scale hard asperity to address fundamental questions of metallic biomaterial FCC in biologically representative environments. Traditional biomedical alloys (CoCrMo, Ti-alloys and stainless steel) and novel additively manufactured alloys (CoCrMoW) were …

    clemson Repository record for Single Asperity Fretting Corrosion of Traditional and Additively Manufactured Metallic Biomaterials: Quantitative Analysis from Acetabular Tapers to Micron and Nanometer Scale Tribocorrosion (opens in a new tab)

  11. Stochastic modeling of the variation of velocity and permeability as a function of effective pressure using the Bed-of-Nails asperity-deformation model

    … previously been modeled using the Bed-of-Nails asperity-deformation model. The main objective of this research was to explore the sensitivity of the Bed-of-Nails and effective-pressure models to random, Gaussian errors, by using an inverse approach. To achieve this, numerical modeling of …

    tamu Repository record for Stochastic modeling of the variation of velocity and permeability as a function of effective pressure using the Bed-of-Nails asperity-deformation model (opens in a new tab)

  12. Theoretical and Experimental Investigation of Adhesion in Microelectromechanical Systems

    … (EMD) elastic theory, an improved single asperity meniscus model considering asperity deformation due to both contact and adhesive forces was developed. Specifically included in this model was the solid surface interaction inside the contact area. It was found that due to asperity …

    uiuc Repository record for Theoretical and Experimental Investigation of Adhesion in Microelectromechanical Systems (opens in a new tab)

  13. Efficient machine learning algorithms for pattern identification and statistical properties of faults’ asperities

    … onto active fault surfaces in Asperities and Non-Asperity areas. For this purpose, the earthquakes had to be studied with the statistical principles that governs them. Therefore, a big part of this dissertation was devoted to the utilization of statistic tools for the analysis of earthquakes and …

    greece Repository record for Efficient machine learning algorithms for pattern identification and statistical properties of faults’ asperities (opens in a new tab)

  14. Nano-Scale Contact In The Presence Of Tribopolymers

    … We focus on the properties of single asperity contacts in the presence of adsorbates within a molecular dynamics description. A platinum-platinum asperity contact is modeled with adsorbed oligomers with variable properties. This system is particularly tailored to the context of …

    penn Repository record for Nano-Scale Contact In The Presence Of Tribopolymers (opens in a new tab)

  15. Thermomechanical material behavior of thin Carbon film under high speed sliding contact

    … high speed sliding contact. One is from a single asperity contact like a deep scratch (or plowing and abrasion). The other is from bulk surface contact like burnishing. Based on those two types of contact, both a single asperity and multi asperity systems are considered in the analytical model. An …

    ttu Repository record for Thermomechanical material behavior of thin Carbon film under high speed sliding contact (opens in a new tab)

  16. Modeling and understanding of directional friction on a fully lubricated surface with regular anisotropic asperities

    … micro structures (or asperities). The word ‘asperity’ refers to a single physical entity on the surface of a material, contributing to a concept called roughness in traditional tribology. Regular asperity surfaces imply that all asperities on the surface of a material have the same shape and …

    sask Repository record for Modeling and understanding of directional friction on a fully lubricated surface with regular anisotropic asperities (opens in a new tab)

Page 1 of 11