Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 59 for “"Asphalt Emulsion"”.
-
Refining Particle Size Specification for Asphalt Emulsion
… a considerable number of these treatments use asphalt emulsion (which are refer to simply emulsions from here on). Emulsions are classified based on their particle charge and reactivity. Emulsions used in chip seals are usually of rapid set reactivity and are classified based on tests over …
-
Frost Susceptibility of Base Materials Treated with Asphalt Emulsion
The objective of this research was to investigate emulsion-treated base (ETB) frost susceptibility in terms of both freeze-thaw cycling and frost heave. The research performed in this study involved laboratory testing of ETB materials sampled from both the Redwood Road and 7800 South reconstruction …
-
Comparative Life Cycle Assessment (LCA) of Different Asphalt Emulsion Types
… plays a vital role in modern society, with asphalt being a predominant material used for pavement construction. Asphalt emulsions are commonly used in several pavement applications. They are effective for preventive and corrective maintenance on asphalt or concrete pavements, base …
-
EVALUATION OF STRUCTURAL LAYER COEFFICIENTS FOR ASPHALT EMULSION-AGGREGATE MIXTURES.
… the structural layer coefficients for asphalt emulsion-aggregate mixtures. A hot plant-mixed asphaltic concrete was evaluated for structural layer coefficient, and the radial stress vs. fatigue failure relationship was developed using circular specimens and the Jimenez deflectometer. …
-
Temporal and Spatial Variability in Base Materials Treated with Asphalt Emulsion
… properties of base materials stabilized with asphalt emulsion and to assess the rate at which emulsion-treated base (ETB) design properties are achieved. The second objective of this research was to identify construction and environmental factors most correlated to specific mechanical …
-
Laboratory performance of early cured asphalt emulsion treated base for cold regions
Asphalt emulsions as an alternative for stabilizing base layers can be cost effective especially in cold regions where supplying hot mix is not economical. However, at low temperatures, Emulsion Aggregate Mixtures (EAM) show low strength at early ages and require a longer curing time for asphalt …
-
Best Practices for Asphalt Emulsion Particle Size Analyses Using a Coulter Counter
As asphalt pavements develop distresses, pavement preservation, maintenance, and rehabilitation treatments are used to mitigate distresses and extend the life of the pavement. Many of these treatments utilize asphalt emulsion. Previous research has linked particle size to material properties …
-
Quantifying Workability, Compactability, and Cohesion Gain of Asphalt Emulsion Cold In-Place Recycling
… Cold in-place recycling (CIR) stabilized with asphalt emulsion and full depth reclamation (FDR) stabilized with asphalt emulsion or foamed asphalt. One white paper (Chapter 2), two accepted peer reviewed journal articles (Chapters 3 and 4), and one submitted peer reviewed journal article …
-
Enhancing the knowledge of quick setting asphalt emulsion applications using systematic scientific and engineering approaches
<p>Asphalt emulsions are a highly used but highly misunderstood material. With the increased focus on pavement preservation and rehabilitation, the demand for asphalt emulsions has increased. However, the knowledge of asphalt emulsions remains limited to the industry and is dispersed throughout …
-
Evaluation and improvement of micro-surfacing mix design method and modelling of asphalt emulsion mastic in terms of filler-emulsion interaction
… conceptual model for filler stiffening effect on asphalt mastic of micro-surfacing: A new model is proposed, which is able to establish limits for minimum and maximum filler concentrations in the micro-surfacing mixture base on only the filler important physical and chemical properties; 5) …
-
Obtenção de emulsões asfálticas modificadas utilizando resíduos industriais
… of conventional and modified cationic asphalt emulsions. The asphalt emulsions were developed by using the Petroleum Asphalt Cement (CAP 50-70) from Fazenda Belém (Petrobras -Aracati-Ce). The first step in this research was the development of the oil phase (asphalt + solvent) and the …
-
Evaluation of a modification of current micro-surfacing mix design procedures
… investigation concerning the effect of asphalt emulsion, added water content, and the use of additives (Portland cement) on the design parameters and properties of micro-surfacing mixtures. For this, one aggregate type, one asphalt emulsion type/grade, and one aggregate gradation were …
-
Obtenção de emulsões asfálticas convencionais e modificadas com argilas e nanoargilas
The increasing demand for asphalt leads to the development of techniques that can improve the quality of products and increase the useful working life of pavements. Consequently, there is a growing application of asphalt emulsions, which are produced from a mixture of petroleum asphalt cement (CAP) …
-
Evaluating the Stabilization of Gypseous and Gypsiferous Sands Using Different Chemical Additives to Mitigate Gypsum Dissolution
… Three different additives (activated fly ash, asphalt emulsion, and Portland cement) were evaluated to select the appropriate additive that would enhance the mechanical properties of these soils. The selection of these additives was based on two criteria. First, additive must be inexpensive and …
-
Return to Traffic of Full Depth Reclamation Pavements
… for deteriorated pavements. However, when using asphalt emulsion based rehabilitation techniques one of the most challenging aspects of FDR is determining when traffic can be returned to the rehabilitated pavement surface. Since asphalt emulsion mixtures need ample time for curing, they cannot be …
-
Laboratory Comparison of Full Depth Reclamation Stabilization Techniques Using Arkansas Field Materials
… stabilization techniques include the addition of asphalt emulsion, asphalt foam, or cement. Using the North Carolina emulsion FDR mix design, the Wirtgen foam FDR mix design, and the Portland Cement Association cement FDR mix design, field materials from four Arkansas highways in the Fayetteville …
-
The Effect of Mineral Filler, Asphalt Content, and Curing Time on the Properties of Cold Mixes When Used for Low-volume Roads
… of energy fuels have increased the rate of emulsion use in recent years. These factors have also shifted the efforts to replace cutback asphalts with emulsified asphalts in a majority of paving applications, especially in paving mixtures. This study reports the findings of a laboratory …
-
A substitute for wood veneer.
… singly and in mixtures: Starch, sodium silicate, asphalt emulsion, animal glue, urea resin with a wheat flour extender, rosin, and casein. The composition and test results of the fiberboard panels made in the laboratory are reported.
-
Laboratory characterization of bitumen treated full depth reclamation materials
… (CIR) and Full-Depth Reclamation (FDR) of asphalt pavements are promising alternatives for road rehabilitation. Although Cold Recycled bituminous Materials with bitumen-stabilized materials have been successfully applied, there are still some critical problems existing in this technology. …
-
Laboratory investigation of the influence from aggregate and climate on stiffness development in seal coat asphalt emulsions
Emulsified asphalt is widely used in many highway maintenance and construction applications, and their effectiveness is greatly influenced by the construction process and climatic conditions at the time of application and soon thereafter. This research studied the rate of residue formation of …
Page 1 of 3