Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 329 for “"Atomic Force Microscope (AFM)"”.

  1. Fabrication of High-Performance Probes for Atomic Force Microscope (AFM)

    Atomic force microscope (AFM) is widely used for topographical structure characterization. However, one serious issue with AFM imaging is the intrinsic artifact in the AFM image when mapping a none-flat surface (e.g. a deep and narrow hole/trench) where the tip cannot fully follow the sample …

    waterloo Repository record for Fabrication of High-Performance Probes for Atomic Force Microscope (AFM) (opens in a new tab)

  2. Nanofabrication of direct positioning atomic force microscope (AFM) probes and a novel method to attain controllable lift-off

    … and its applications in the area related to atomic force microscope (AFM) probes and a novel way of constructing the bi-layer system for liftoff. The contribution of this thesis is therefore the introduction and characterization of nanotechnologies and their applications in fabricating the …

    waterloo Repository record for Nanofabrication of direct positioning atomic force microscope (AFM) probes and a novel method to attain controllable lift-off (opens in a new tab)

  3. Fabrication of high aspect ratio (HAR) atomic force microscope (AFM) tips and nano-pillar arrays using pseudo-Bosch and wet etching

    … of nanofabrication and application related to atomic force microscope (AFM) system. AFM tip is the most important part of AFM imaging to obtain the surface information by touching the substrate and “feeling” the force interaction. However, the scanned image using regular commercial tips is not …

    waterloo Repository record for Fabrication of high aspect ratio (HAR) atomic force microscope (AFM) tips and nano-pillar arrays using pseudo-Bosch and wet etching (opens in a new tab)

  4. Towards Understanding Asteroid Cohesion: A Study of Adhesion on Micron-Sized Planetary Analogues using an Atomic Force Microscope (AFM) with Implications for Sample Return Analysis.

    … that are tenuously held together by cohesive forces. Improving the accuracy of predictions of asteroid strengths requires suitable laboratory measurements of relevant materials, as well as increasing the availability of materials from sample return. In this work, we use Atomic Force Microscopy …

    ucf Repository record for Towards Understanding Asteroid Cohesion: A Study of Adhesion on Micron-Sized Planetary Analogues using an Atomic Force Microscope (AFM) with Implications for Sample Return Analysis. (opens in a new tab)

  5. Measuring the elastic modulus of polymers using the atomic force microscope

    Testing a new method of nanoindentation using the atomic force microscope (AFM) was the purpose of this research. Nanoindentation is a useful technique to study the properties of materials on the sub-micron scale. The AFM has been used as a nanoindenter previously; however several parameters needed …

    mtu Repository record for Measuring the elastic modulus of polymers using the atomic force microscope (opens in a new tab)

  6. In Situ Structural Study of Underpotential Deposition and Electrocatalysis on Gold(111) Electrodes

    … on Au(111) electrodes. The application of the atomic force microscope (AFM), the scanning tunneling microscope (STM), and the surface x-ray scattering (SXS) to these UPD studies has provided in situ measurements from which we investigate factors that determine UPD surface structures and …

    uiuc Repository record for In Situ Structural Study of Underpotential Deposition and Electrocatalysis on Gold(111) Electrodes (opens in a new tab)

  7. Characterization of LiCoO₂ thin film grown by pulsed laser deposition

    … also applied such as x-ray diffraction (XRD) and atomic force microscope (AFM). It shows that PLD is a convenient technique to deposit LiCoOa thin film and the growth conditions have strong effect on the properties of the resulting films.

    ubc Repository record for Characterization of LiCoO₂ thin film grown by pulsed laser deposition (opens in a new tab) Download PDF for Characterization of LiCoO₂ thin film grown by pulsed laser deposition (opens in a new tab)

  8. Mechanical properties of dense suspensions: Variations with interaction potential

    … in the solutions. The normal and frictional forces between pairs of the silica particles were measured directly with an atomic force microscope (AFM). The rheology of suspensions of the particles was studied with a constant stress rheometer.

    uiuc Repository record for Mechanical properties of dense suspensions: Variations with interaction potential (opens in a new tab)

  9. CRYOGENIC ATOMIC FORCE MICROSCOPE FOR CHARACTERIZATION OF NANOSTRUCTURES

    … the design and applications of a cryogenic atomic force microscope (AFM) for characterization of nanostructures. The cryogenic AFM with a conductive tip can measure DC current through nanostructures. We use quartz tuning fork (QTF) as the force sensor. Unique coarse z motor design provides …

    maryland Repository record for CRYOGENIC ATOMIC FORCE MICROSCOPE FOR CHARACTERIZATION OF NANOSTRUCTURES (opens in a new tab)

  10. Scanning probe microscope tips grown by a field-emission process

    … studies the growth of a single nanowire on an atomic force microscope (AFM) tip using a field emission induced growth technique with an aim to produce ultra sharp tips with high aspect ratio that will provide better performance capabilities as compared to existing conventional tips. Single …

    nus Repository record for Scanning probe microscope tips grown by a field-emission process (opens in a new tab) Download file for Scanning probe microscope tips grown by a field-emission process (opens in a new tab)

  11. Design, modeling and fabrication of contact stiffness calibration samples for CR-AFM

    … calibrate the contact stiffness of an atomic force microscope (AFM) cantilever tip in contact with a surface, which is a critical step in the measurement of nano-mechanical properties. The calibration exploits the relationship between contact resonance (CR) frequency and contact …

    uiuc Repository record for Design, modeling and fabrication of contact stiffness calibration samples for CR-AFM (opens in a new tab)

  12. Characterization of Dynamic Response of AFM Cantilevers for Microscale Thermofluidic and Biophysical Sensors

    … on the characterization of dynamic response of atomic force microscope (AFM) cantilevers for thermofluidic and biophysical sensors, a novel scanning thermal microscopy technique development using a tipless microcantilever to investigate micro/nanoscale transport properties in liquid, and the …

    utk-theses Repository record for Characterization of Dynamic Response of AFM Cantilevers for Microscale Thermofluidic and Biophysical Sensors (opens in a new tab)

  13. Mechanical Characterizations of Two-Dimensional Materials

    … behaviors under uniaxial tensile stress. Atomic force Microscope (AFM) was employed for friction measurements on CVD-grown single crystal MoS2 domains.

    rice Repository record for Mechanical Characterizations of Two-Dimensional Materials (opens in a new tab)

  14. Atomic Force Microscope: System and applications

    The Atomic Force Microscope (AFM) has demonstrated its usefulness on a nanometer scale surpassing the resolution of conventional profilometers and optical microscopes. The principle of operation and the instrumentation design of the AFM, as well as some application aspects, are described. Emphasis …

    rit Repository record for Atomic Force Microscope: System and applications (opens in a new tab)

  15. Study of the wear of dental composites using an atomic force microscope

    … use. The wear testing was performed using an Atomic Force Microscope (AFM). Several scanning techniques and various cantilevers were attempted. Finally use of a stainless steel cantilever with a tungsten bead attached resulted in quantifiable wear. AFM imaging in contact mode was used for …

    rit Repository record for Study of the wear of dental composites using an atomic force microscope (opens in a new tab)

  16. Transparent Platinum Counter Electrode for Building Integrated Dye-sensitized Solar Cells

    … tin oxide/glass substrate. Scanning electron microscope (SEM) and atomic force microscope (AFM) images showed a large surface area for the nanoporous Pt nanoclusters. DSSCs with Pt-NP counter electrode had 6.17% power conversion efficiency, comparable to the 6.46% efficiency of the …

    sdstate Repository record for Transparent Platinum Counter Electrode for Building Integrated Dye-sensitized Solar Cells (opens in a new tab)

  17. Studies of molecular conductance with conducting probe AFM

    … junctions with the help of conducting probe atomic force microscope (AFM). Two types of molecules (saturated alkanethiols and oligo(phenylene ethynylene) (OPE)) were self-assembled into monolayers on atomically flat gold substrate. The probe of the conducting probe AFM was adopted as another …

    nus Repository record for Studies of molecular conductance with conducting probe AFM (opens in a new tab) Download file for Studies of molecular conductance with conducting probe AFM (opens in a new tab)

  18. Characterization of mechanical properties of tungsten nanowires

    … of the nanowire in a transmission electron microscope (TEM). Two techniques based on the scanning probe microscope were considered. The first uses lateral force measurements in which a tungsten nanowire grown on a standard atomic force microscope (AFM) tip is bent against the corner of a …

    nus Repository record for Characterization of mechanical properties of tungsten nanowires (opens in a new tab) Download file for Characterization of mechanical properties of tungsten nanowires (opens in a new tab)

Page 1 of 17