Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 7 of 7 for “"Auger Cast Piles"”.

  1. Estimating the As-Placed Grout Volume of Auger Cast Piles

    Augered Cast-in-Place (ACIP) piles are a geotechnical foundation element increasingly used to support large publicly funded structures as an alternative to drilled shafts or driven piles. ACIP piles are constructed by drilling an excavation to the full length of the designed pile with a continuous …

    usf Repository record for Estimating the As-Placed Grout Volume of Auger Cast Piles (opens in a new tab)

  2. Analysis and Design of Auger Cast Piles with Isolation Casing

    … the analysis and design of double cased piles. Bay Area Rapid Transit (BART) runs a large rail system both above and below ground that connects the entire Bay Area. BART requires that all new constructions avoid transmitting axial load to their tunnels from adjacent piles. If piles fall …

    calpoly Repository record for Analysis and Design of Auger Cast Piles with Isolation Casing (opens in a new tab)

  3. Numerical Insights Into the Effect of Spacing on Axial Resistance of Auger Cast Piles

    … and experimentally if the axial capacity of Auger Cast Piles (ACPs) constructed in interbedded layers of granular soil and Limestone should be reduced as a function of pile spacing. The numerical component of this thesis includes a series of parametric studies that consider different sets of …

    ucf Repository record for Numerical Insights Into the Effect of Spacing on Axial Resistance of Auger Cast Piles (opens in a new tab)

  4. Full-Scale Testing of Blast-Induced Liquefaction Downdrag on Auger-Cast Piles in Sand

    Deep foundations like auger-cast piles and drilled shafts frequently extend through liquefiable sand layers and bear on non-liquefiable layers at depth. When liquefaction occurs, the skin friction on the shaft decreases to zero, and then increases again as the pore water pressure dissipates and the …

    byu Repository record for Full-Scale Testing of Blast-Induced Liquefaction Downdrag on Auger-Cast Piles in Sand (opens in a new tab) Download PDF for Full-Scale Testing of Blast-Induced Liquefaction Downdrag on Auger-Cast Piles in Sand (opens in a new tab)

  5. Quality Assurance of Cast-in-Place Foundation Elements

    Construction of cast-in-place concrete deep foundation elements is a common practice, yet performed almost entirely blind, leaving uncertainty in the quality of the as-built, below-ground element. This dissertation focuses on three quality assurance aspects of cast-in-place foundations: an …

    usf Repository record for Quality Assurance of Cast-in-Place Foundation Elements (opens in a new tab)

  6. Remote Monitoring Systems For Substructural Health Monitoring

    … Second, many foundation elements such as driven piles or auger-cast piles are constructed in a way that makes installation difficult or can severely damage the sensing materials. This thesis presents two case studies of Remote Monitoring Systems for Substructural Health Monitoring applications …

    usf Repository record for Remote Monitoring Systems For Substructural Health Monitoring (opens in a new tab)

  7. Effectiveness of Ground Improvement Around Piled-Raft for Tall Wind Turbines in Weak Soil: Analytical and Finite Element Analyses

    … mean wind speed of 80 mph, consisted of 24 auger cast piles each 48.4 m long and 0.457 m in diameter. The raft was designed to be a circular raft, 8 m in diameter and 1 m in thickness. Then, five depths of ground improvement using cement soil mixing (CSM) around the piled-raft foundation …

    clemson Repository record for Effectiveness of Ground Improvement Around Piled-Raft for Tall Wind Turbines in Weak Soil: Analytical and Finite Element Analyses (opens in a new tab)