Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 37 for “"Auger spectroscopy"”.
-
Potential-energy curves of small molecular dications determined with Auger spectroscopy
In the present work high-resolution normal Auger-electron spectra of the NO molecule subsequent to O 1s–1 and N 1s–1 photoionizations, the CO2 molecule subsequent to C 1s–1 photoionization, and the OCS molecule subsequent to S 2p–1 photoionization are reported. In addition, corresponding …
-
Μελέτη ανόργανων συστατικών οστών με φασματοσκοπικές τεχνικές
… irregularities. Moreover, this thesis introduces Auger spectroscopy as a technique for the determination of Ca/P ratio. This ratio is also studied by X-ray spectroscopy facilitated on a Scanning Electron Microscope (SEM). The Auger spectra are generated by electrons emitted from the surface of a …
-
Diffusion and Evaporation of Nitrogen on Tungsten (100)
… (100) plane of tungsten has been examined using Auger spectroscopy. The initial localized deposit required for diffusion measurements in a concentration gradient is created by a highly collimated molecular beam. The sample, under computer control, is moved across an electron beam, and the Auger …
-
Structure Sensitivity of Ethylene Adsorption on Platinum (Dehydrogenation)
… Desorption (TPD), Electron Energy Loss Spectroscopy (EELS), Low-Energy Electron Diffraction (LEED) and Auger spectroscopy are applied to study the adsorption of ethylene on the square (1 x 1)Pt(100) and on the pseudo-hexagonal (5 x 20)Pt(100). A model based on the conservation of orbital …
-
Effects of Surface Oxidation on Vacancy Defects in Beta Nickel-Aluminum Alloys
Transmission Electron Microscopy and Auger Electron Spectroscopy has been used to make observations of the oxidation process in (beta)-NiAl alloys annealed under controlled conditions of temperature and oxygen partial pressure. Binary Ni-Al alloys, with nominally 47.5, 50.4 and 52.5 at .% Al, were …
-
Surface chemistry of iodine on platinum (111)
… surface has been investigated using LEED, Auger spectroscopy, and work function measurements. The phase transformations and work function changes have also been measured during desorption. Mass spectroscopy shows that above 300 K the main desorption product is atomic iodine with a small …
-
Electron beam decompositions of ionic crystals
… using scanning electron microscopy (SEM) and Auger electron microscopy (SAM). Alkali-metal rich structures with diameters of up to several microns were found on the sample surfaces;The temperature dependence of desorption yields were measured using a mass-spectrometer. We observed two …
-
Effects of Thickness, Morphology and Molecular Structure of Donor and Acceptor Layers in Thermally Interdiffused Polymer Photovoltaics
… (EQE) as compared with bilayer devices. Auger spectroscopy, combined with argon-ion beam milling, serves to record the concentration depth profile and identify concentration gradients in the device through detection of the sulfur in the P3OT backbone. Concentration gradients are optimized …
-
Studies of epitaxial graphene and silicon growth on silicon carbide under silane gas
… thin films are characterized in-situ by LEED and Auger spectroscopy and ex-situ by AFM, SEM, and STM. Prior to the graphitization temperature, silicon deposits on SiC surface to grow thin film layers. On the Si-face, LEED images reveal several new reconstructions which have not reported elsewhere. …
-
Surface studies of chemical vapor deposited and natural (100) diamond
… using high resolution electron energy loss spectroscopy (HREELS). The experiments were conducted at a variety of incident energies: 8.8 eV, 6.0 eV, 3.2 eV, and 1.5 eV. HREELS of polycrystalline CVD diamond reveals a strong band at 2900 cm<sup>-1</sup> with two maxima and a broad shoulder on …
-
Polymer/Fullerene Photovoltaic Devices - Nanoscale Control of the Interface by Thermally-controlled Interdiffusion
… with transmission electron microscopy and with Auger spectroscopy combined with ion beam milling to create a depth profile of the polymer concentration in the film. Initial studies to induce an interdiffusion were done on poly(2-methoxy-5-(2'-ethylhexyloxy)-1,4-phenylenevinylene) (MEH-PPV) as …
-
Electrodeposition of Ag and Tl on platinum single crystals covered with iodine
… electrochemical methods, A.C. impedance, LEED, Auger spectroscopy, thermal desorption spectroscopy and contact angle measurements. The surface compound Pt(111)(3 x 3)-AgI is formed during the first electrodeposition peak of Ag+ on Pt(111)(√7 x √7)R19.1°-I. The crystallographic structure of this …
-
SOLID SOURCE CHEMICAL VAPOR DEPOSITION OF REFRACTORY METAL SILICIDES FOR VLSI INTERCONNECTS.
… formation is possible during this anneal cycle. Auger spectroscopy and Rutherford backscattering results indicate that silicon-rich films can be deposited, and that the concentrations of carbon and oxygen incorporated from the carbonyl source are a function of the deposition parameters. At higher …
-
Effect of pattern and coating properties on defect formation in aluminum lost foam castings
… <p>Defect characterization was done using Auger spectroscopy, scanning electron microscopy (SEM), and optical metallography. Auger results revealed that the color of the defect changed with carbon layer thickness. SEM imaging showed the presence of wrinkles on fold surfaces while no …
-
Novel silicon and tin alloy nano-particulate materials via spark erosion for high performance and high capacity anodes in lithium ion batteries
… characterized using SEM, TEM, EDS, XPS, Auger spectroscopy, NMR spectroscopy and TGA. The resulting nano-particles show improved performance as anodes over commercialized materials. In particular, pure sparked Sn particles show stable reversible capacity at ~460 mAh/g with >99.5% …
-
Aqueous corrosion of magnesium and magnox
… control of the specimens. SIMS and scanning Auger spectroscopy in conjunction with ion beam milling have been used where possible to confirm the ellipsometric results. Initial results obtained in 0.01 mol/dm<sup>3</sup> NaOH indicated that substrate dissolution was leading to a roughening of …
-
Ferroelectric HfO2 for Emerging Ferroelectric Semiconductor Devices
… included TEM, EELS, XRR, XRD and XPS/Auger spectroscopy. Higher remanant polarization (Pr) was observed for films of 9.3 nm and 13.1 nm thickness. Thicker film (22.9 nm) showed smaller Pr. Devices with 6.4 nm thick films exhibit tunneling behavior showing a memristor like I-V …
-
Growth and characterization of electrodeposited zinc sulphide and chemical vapour atomic layer deposited zinc oxide, sulphide, and oxysulphide thin films
… methods performed on the thin films include: Auger spectroscopy, Rutherford backscattering spectroscopy, scanning electron microscopy, x-ray powder diffraction, Hall measurements and uv/visible transmittance. The as electrodeposited films were nearly stoichiometric but conductive and oriented …
-
The Wear of Aluminium Bronze on Steel in Aviation Kerosene
… diffraction, electron probe microanalysis and Auger spectroscopy. This analysis has shown that the aluminium content, of the bronze, plays an important role, in the seizure mechanism, by diffusion to the steel surface. The additive prevents seizure by preferential corrosion of aluminium from …
Page 1 of 2