Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 779 for “"Austenite"”.
-
Distribution of Boron in Austenite
Made available in DSpace on 2014-12-12T01:04:04Z (GMT). No. of bitstreams: 1 7206965.pdf: 1807962 bytes, checksum: ccc6ea83f2be393a0a7c281db369f517 (MD5) Previous issue date: 1971
-
The slow decomposition of austenite
Thesis (M.S.)--Michigan State College of Agriculture and Applied Science. Dept. of Chemical Engineering, 1940
-
Austenite decomposition of an X70 linepipe steel
… in the production of linepipe steels to retard austenite recrystallization and decomposition. This study focused on the run-out table stage of TMCP. An X70 linepipe steel was selected, which contains 0.05 wt% carbon and 0.06 wt% niobium. Continuous cooling tests were conducted using a Gleeble …
-
Austenite decomposition in an X80 linepipe steel
… welded linepipes are predominantly determined by austenite decomposition during cooling after welding processes. Thus, a full understanding of continuous cooling transformation of austenite is a key step toward improving the overall performance of linepipes. The main objective of the current study …
-
Wear behavior of austenite containing plate steels
… a variety of hardness levels and retained austenite contents, achieved by heat treatments, including quench and tempering (Q&T) and quench and partitioning (Q&P). Samples worn by three wear tests, namely Dry Sand/Rubber Wheel (DSRW), impeller tumbler impact abrasion, and Bond abrasion, were …
-
Austenite grain growth studies in line pipe steels
… engineered microstructure. Within the TMCP, the austenite grain size and structure are important factors in determining the final microstructure and thus mechanical properties. The purpose of this work is to investigate the austenite grain growth evolution during the thermal treatment in the …
-
A magnetometric investigation of the austenite-bainite transformation
The isothermal decomposition of austenite in the bainite region was investigated by means of a magnetic balance. The progress of the transformation was followed at intervals of fifteen to thirty seconds. The data thus obtained showed that the austenite to bainite transformation occurs in at least …
-
Kinetics of the pearlite to austenite reversion transformation
The pearlite-to-austenite reversion transformation kinetics under isothermal and continuous heating conditions in a eutectoid plain-carbon steel have been measured, using a dilatometric technique on a Gleeble 1500 Thermomechanical Simulator. The isothermal data was characterized in terms of the …
-
Modeling the austenite decomposition into ferrite and bainite
… model to adequately describe the kinetics of austenite decomposition into polygonal ferrite and bainite, such that for complex thermal paths simulating those of industrial practice, the final microstructure in advanced high strength steels can reasonably be predicted. This is in particular …
-
Some factors affecting retained austenite in alloy steels
Thesis (M.S.)--Michigan State College of Agriclture and Applied Science. Dept. of Chemical and Metallurgical Enineering, 1947
-
Effect of heating rate and microstructural scale on austenite formation, austenite homogenization, and as-quenched microstructure in three induction hardenable steels, The
Includes bibliographical references (pages 277-288).
-
The isothermal decomposition of austenite in the bainite region
The isothermal decomposition of austenite in the bainite region has been examined. The progress of the transformation in several hypoeutectoid and eutectoid steels was investigated metallographically from a qualitative point of view. A survey was made of the information available on the initiation, …
-
Austenite formation and grain refinement in C-Mn steels
The present work deals with grain refinement and austenite formation in a plain C-Mn steel with 0.17C-0.74Mn (wt pct). To improve the limited work hardening capability of ultrafine grained ferritic steels, new approaches were adopted to develop bimodal ferrite grain size distributions and ultrafine …
-
Modeling of austenite decomposition in an AISI 4140 steel
… The characterization of the kinetics of austenite decomposition to equilibrium and/or non equilibrium phases in a low alloy steel, such as AISI 4140, by performing isothermal transformation experiments is time consuming and hence not cost effective. Further, to generate meaningful and …
-
Austenite grain growth kinetics and the grain size distribution
… aims of this work are to assess the kinetics of austenite grain growth, and to estimate the three dimensional grain size distribution. Measurements are to be used for the validation of a statistical model for the estimation of the kinetics of austenite grain growth during hot strip rolling. A …
-
The Thermal Stabilisation of Austenite at Sub-Zero Temperatures
… relating to the thermal stabilisation of austenite has been reviewed with particular reference to the mechanisms proposed by various workers to account for the phenomenon. The complex interactions between martensite transformation and stress have also been discussed in order to assess the …
-
Computational modeling of internal surfaces in austenite-martensite system
In this work, we present a new computational method based on a nonconforming domain decomposition technique for modeling of phase transitions. Phase transitions are the result of thermal or mechanical loading in ferromagnetic materials or shape memory materials. Modeling of phase transitions is …
-
The characteristics of the formation of austenite in eutectoid steel
… on the rate and nature of the formation of austenite in some commercial steels. Previous work is reviewed and compared with the results of current experiments. Experimental procedure is briefly discussed. Steels used for these experiments were similar to the following S.A.E. specifications; …
-
Austenite grain growth behaviour of HSLA steel during reheating treatment
The grain growth behaviour during reheating between 950 ºC and 1300 ºC of as-cast Al-Nb steel (containing 0.019 wt% Nb and 0.057 wt% Al) and rolled Nb-containing steel (containing 0.028 wt% Nb and 0.031 wt% Al) have been investigated. In particular the role of microalloying element segregation …
Page 1 of 39