Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 36 for “"Austenitization"”.

  1. Modeling, control, and optimization of an industrial austenitization furnace

    … temperature in a continuously operating furnace (austenitization), followed by rapid cooling (quenching) in water, brine or oil to induce desired metallurgical properties like hardness, toughness, shear strength, tensile strength, etc. The novelty of this work lies in the two scale modeling …

    texas Repository record for Modeling, control, and optimization of an industrial austenitization furnace (opens in a new tab)

  2. Austenitization of Ultra High Strength Steel by Direct Contact Heating for Hot Forming Die Quenching

    … nonuniform heating over the blank and incomplete austenitization, leading to bainitic regions in the formed part. This method may be easier to control compared to other tailoring procedures, which focus on slower and nonuniform cooling during the quenching stage. This thesis builds upon the …

    waterloo Repository record for Austenitization of Ultra High Strength Steel by Direct Contact Heating for Hot Forming Die Quenching (opens in a new tab)

  3. A Novel Two Step Austenitization Process To Produce Austempered Ductile Iron (adi) With High Strength, Ductility And Fracture Toughness

    … that are, in turn, strongly influenced by austenitization and austempering times and temperatures. This research study determined that, compared to conventionally processed ADI., one variant of the Two-Step Austenitizing heat treatment process yielded an ADI alloy with superior fracture …

    wayne-thes Repository record for A Novel Two Step Austenitization Process To Produce Austempered Ductile Iron (adi) With High Strength, Ductility And Fracture Toughness (opens in a new tab)

  4. The Effect of Austenitization Temperature on the Microstructure, Bend Properties, and Hardness of a Chrome-Bearing White Cast Iron

    … XRD. This line of research revealed that lower austenitization temperatures resulted in a martensitic matrix with fewer, smaller secondary carbides, resulting in higher strength and hardness. In contrast, higher austenitization temperatures produced an austenitic matrix with coarser carbides, …

    vt Repository record for The Effect of Austenitization Temperature on the Microstructure, Bend Properties, and Hardness of a Chrome-Bearing White Cast Iron (opens in a new tab)

  5. Developing a Thermometallurgical Model and Furnace Optimization for Austenitization of Al-Si Coated 22MnB5 Steel in a Roller Hearth Furnace

    … with two key objectives: (1) ensure complete austenitization of blanks and (2) transformation of the Al-Si coating into a protective Al-Si-Fe intermetallic coating. Blank heating rates are controlled by the roller speed and zone set-point temperatures, which are currently set by …

    waterloo Repository record for Developing a Thermometallurgical Model and Furnace Optimization for Austenitization of Al-Si Coated 22MnB5 Steel in a Roller Hearth Furnace (opens in a new tab)

  6. Developing and Improving a Thermometallurgical Model for 22MnB5 Steel in a Roller Hearth Furnace

    … improve process efficiency and ensure complete austenitization before forming, a complete thermal-metallurgical furnace model that predicts the blank heating profile and the austenitization progress inside a roller hearth furnace is needed. This work introduces a framework for the furnace model, …

    waterloo Repository record for Developing and Improving a Thermometallurgical Model for 22MnB5 Steel in a Roller Hearth Furnace (opens in a new tab)

  7. Effects of prior microstructure on quenched and partitioned steels

    … martensite through a process consisting of austenitization or intercritical (IC) annealing, quenching to produce a calculated fraction of martensite, and partitioning C from martensite to stabilize the remaining austenite. Prior microstructure effects on Q&P heat treatment were investigated …

    colo-mines Repository record for Effects of prior microstructure on quenched and partitioned steels (opens in a new tab)

  8. Heat Transfer Modeling of Roller Hearth and Muffle Furnace

    … and how the sensible energy and latent heat of austenitization change with blank temperature. While the sensible energy is known, there is considerable uncertainty regarding the radiative properties and the latent heat of austenitization. In this work the effective specific heat of Usibor® 1500 …

    waterloo Repository record for Heat Transfer Modeling of Roller Hearth and Muffle Furnace (opens in a new tab)

  9. Al-Si Coating Growth in Hot Stamping Steels: Experiments and Model

    … surface oxidation and decarburization during the austenitization process, which occurs within a furnace. During austenitization, the Al-Si coating melts at ~577°C, followed by the transformation of liquid coating to Fe-Al and Fe-Al-Si intermetallic phases, which affect the as-formed performance of …

    guelph Repository record for Al-Si Coating Growth in Hot Stamping Steels: Experiments and Model (opens in a new tab)

  10. Grain refinement in dual phase steels

    … consisted of cooling the steel from the austenitization temperature at a rate of 40°C/s to a deformation temperature, which was 25 to 50°C above the austenite to ferrite transformation start temperature (Ar3) specific for the given austenitization and cooling conditions. Then the steel …

    ubc Repository record for Grain refinement in dual phase steels (opens in a new tab) Download PDF for Grain refinement in dual phase steels (opens in a new tab)

  11. Προσομοίωση των μετασχηματισμών φάσης και της εξέλιξης της μικροδομής σε υποευτηκτοειδείς χάλυβες κατά τη διάρκεια ραγδαίων θερμικών κατεργασιών

    … thesis focuses on the effect of heating rate on austenitization of the ferrite to austenite transformation and carbide dissolution in order to shed light in the mechanism that lead to mixed microstructures characterized with co – existence of martensite, bainite and retained austenite under …

    greece Repository record for Προσομοίωση των μετασχηματισμών φάσης και της εξέλιξης της μικροδομής σε υποευτηκτοειδείς χάλυβες κατά τη διάρκεια ραγδαίων θερμικών κατεργασιών (opens in a new tab)

  12. The Effect of Direct Hot Press Forming on the Electrochemical Properties of Next Generation Zn-Coated Press Hardenable Steels

    … to direct hot press forming (DHPF). However, the austenitization of the galvanized steel causes the Zn-based coating to transform into two intermetallic phases. These are iron-rich α-Fe(Zn) and zinc-rich Г-Fe3Zn10. The Г-Fe3Zn10 is liquid during traditional DHPF, and the applied stress can result …

    mcmaster Repository record for The Effect of Direct Hot Press Forming on the Electrochemical Properties of Next Generation Zn-Coated Press Hardenable Steels (opens in a new tab)

  13. Ferrite grain refinement in dual phase steels

    … the steels have been rapidly cooled from austenitization temperature to approximately 25-50 °C above austenite to ferrite transformation start temperature without prestrain, to produce highly undercooled austenite, followed by heavy deformation, and subsequent rapid cooling thereby …

    ubc Repository record for Ferrite grain refinement in dual phase steels (opens in a new tab) Download PDF for Ferrite grain refinement in dual phase steels (opens in a new tab)

  14. Effect of prior warm rolling on the retained austenite content and hardening response of (VIM-VAR)--AISI M-50 steel

    … amount of carbides taken into solution during austenitization. It was found that the standard austenitizing temperature of 110 degrees C used to harden stock M-50 can be reduced by 63 Centigrade degrees with warm-rolled M050 steel.

    nps Repository record for Effect of prior warm rolling on the retained austenite content and hardening response of (VIM-VAR)--AISI M-50 steel (opens in a new tab)

  15. Influence of microstructural variation on hydrogen embrittlement susceptibility of 9260 bar steel, The

    … conditions were tempered at 450 ºC. Additional austenitization and quench cycles were conducted on one Q&T condition to refine the prior austenite grain size. The austempered condition was held at an isothermal bainitic hold temperature of 275 ºC upon cooling after austenitization. Q&P …

    colo-mines Repository record for Influence of microstructural variation on hydrogen embrittlement susceptibility of 9260 bar steel, The (opens in a new tab)

  16. High Manganese Press Hardenable Steel for Automotive Safety Applications

    … achieved across various conditions involving austenitization at 890 °C for 60 – 240 s and DHPF temperatures ranging from 550 – 700 °C. These findings strongly suggest that industrial feasibility is attainable for DHPF of GA-coated steel K at lower temperatures, enabling the attainment of …

    mcmaster Repository record for High Manganese Press Hardenable Steel for Automotive Safety Applications (opens in a new tab)

  17. Evaluation of Friction Stir Processing of HY-80 Steel Under Wet and Dry Conditions

    … resistance tests. The results indicated that austenitization occurred within the stir zones and subsequent cooling influenced the final microstructure and properties. The thermomechanically affected zone displayed a gradual change in near-equiaxed austenitic grain size towards both the tool …

    nps Repository record for Evaluation of Friction Stir Processing of HY-80 Steel Under Wet and Dry Conditions (opens in a new tab)

  18. The kinetics of austenite formation during continuous heating of a multi-phase steel

    … on the transformation processes following austenitization. However, the phase transformations occurring upon heating is of profound importance. The state of the microstructure after heating; i.e., volume fraction, shape, distribution and chemical composition of the austenite grains, has a …

    ubc Repository record for The kinetics of austenite formation during continuous heating of a multi-phase steel (opens in a new tab) Download PDF for The kinetics of austenite formation during continuous heating of a multi-phase steel (opens in a new tab)

  19. Development Of Nanostructured Austempered Ductile Cast Iron

    … by a unique heat treatment consisting of austenitization at a high temperature and subsequent plastic deformation at the same austenitizing temperature followed by austempering. The investigation also examined the effect of cryogenic treatment, effect of intercritical austenitizing …

    wayne-thes Repository record for Development Of Nanostructured Austempered Ductile Cast Iron (opens in a new tab)

  20. Intercritical austenite formation in the coarse grain heat affected zone of X80 line pipe steels

    … constituents. The former is a result of full austenitization in the first weld pass, and the latter of intercritical annealing in the subsequent weld pass. Size and fraction of M/A constituents are the major factors affecting the impact toughness. Therefore, analyzing the formation of …

    ubc Repository record for Intercritical austenite formation in the coarse grain heat affected zone of X80 line pipe steels (opens in a new tab) Download PDF for Intercritical austenite formation in the coarse grain heat affected zone of X80 line pipe steels (opens in a new tab)

Page 1 of 2