Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 521 for “"Autoclave"”.
-
Autoclave Studies of Lignite Liquefaction
… of North Dakota Time-Sampling Hot-Charge Batch Autoclave System with the gas at an initial pressure of 400 psig.Oil yields and conversions ranged from 0.9 percent to 35.7 percent and 66.7 percent to 90.6 percent, respectively, increasing as the time at or near the reaction temperature …
-
Gas transport in out-of-autoclave prepreg laminates
Out-of-autoclave (OOA) pre-impregnated (prepreg) materials are a prospective alternative to traditional autoclave processing, with the potential to reduce processing costs and build structures without size limitations imposed by the autoclave. Gas transport pathways in prepreg laminates play an …
-
Pelletized Slag Cement: Hydraulic Potential and Autoclave Reactivity
… The study of the incorporation of slag cement in autoclaved binders having a wide range of compositions in the ternary system containing slag, portland cement and ground quartz (silica flour).</p> <p>3. The effects of variations in the physical and chemical properties of slag cement on autoclave …
-
High temperature polymer composites using out-of-autoclave processing
… usually manufactured, under high pressure, in an autoclave which requires high capital investments and operating costs. In contrast, out-of-autoclave manufacturing, specifically vacuum-bag-only prepreg process, is capable of producing low cost and high performance composites. In the current study, …
-
Advanced composites using non-autoclave processes: manufacturing and characterization
… objective of the present study is to develop non-autoclave processes to manufacture high performance composites for aerospace applications. In Paper 1, vacuum assisted resin transfer molding (VARTM) process was developed for elevated temperature composites. Use of VARTM process for fabricating …
-
Thermal Cycling of Out‐Of‐Autoclave Thermosetting Composite Materials
… for space applications are often cured in an autoclave to achieve the required space grade quality which is limited and expensive. Therefore, fabrication of large structures using out‐of‐autoclave (OOA) with the same performance as autoclave with lower costs is of interest of many industries. …
-
Purification of iron contaminated manganese leach solutions by autoclave methods
Electronic Thesis or Dissertation
-
Use of autoclave methods to prepare a concentrated manganese electrolyte
Electronic Thesis or Dissertation
-
Behaviour of resin voids in out-of-autoclave prepreg processing
… expansion particularly in low pressure out-of-autoclave (OOA) processes. Modern advanced prepregs have low volatile content except for moisture due to the hygroscopic property of epoxy. The goal of this study is to investigate the behaviour of resin voids and determine the mechanisms and …
-
Void evolution during processing of out-of-autoclave prepreg laminates
Out-of-Autoclave (OOA) prepreg processing is a promising candidate for replacement of autoclave (AC) processing, which is the current standard for manufacturing primary structural parts in the aerospace industry. However, its success is dependent on the ability to produce high quality parts with …
-
Modelagem e simulação de reatores autoclave para produção de PEBD
… processos a altas pressões, com reatores do tipo autoclave ou tubular. O cenário atual é de crescente demanda por PEBD produzido a custos competitivos, através de plantas de alto desempenho e capacidade, de modo que o desenvolvimento de processo e produto torna-se um fator chave para as empresas …
-
Out-of-autoclave processing development of aerospace carbon fibre polymer composites
Composite materials, particularly carbon fibre-reinforced polymers (CFRPs), have garnered significantattention in the aerospace industry due to their lightweight and high-strength properties. Autoclaving,a well-known method for producing high-quality CFRPs suitable for aerospace applications, …
-
Energy efficiency analysis of autoclave curing of thermoset composites using simulation
… Cure is nearly always a thermal process, with autoclave (and oven) curing the most common. To facilitate this analysis, the autoclave system was broken down into its thermal, mechanical, and electrical subsystems. The electrical and mechanical components, such as computers, vacuum systems, and …
-
Gas transport and water vapourization in out-of-autoclave prepreg laminates
… have traditionally been manufactured using autoclave processing. However, recent advances in material technology have led to the development of pre-impregnated (prepreg) composites that are designed to be cured out-of-autoclave (OOA) and can potentially reduce the costs of processing. In OOA …
-
Outgassing Of Out-Of-Autoclave Composite Primary Structures For Small Satellites
Out-of-autoclave vacuum-bagged-only (VBO) processing is capable of producing lower cost composite primary structures for small satellites than autoclave processing. However, the outgassing performance of VBO structures in a vacuum environment has not been examined. Panels were manufactured from …
-
Characterization of titanium cladded steel ignition in pressure oxidation leaching autoclave
Includes bibliographical references (leaves 143-144).
-
Investigation of autoclave methods for determining alkali-silica reactivity of concrete aggregates
… have developed and investigated the use of autoclave test methods to quickly and accurately identify potential reactive aggregates. Autoclave methods involve boosting the alkali content of the concrete or mortar and conditioning the specimens at elevated temperatures in a closed, steam …
-
Characterization of Interply Shear Behaviour of Out-of-Autoclave Thermosetting Prepreg Composites
Thermoforming of composite materials includes deforming the flat sheets of prepreg laminates into complex shaped composite parts. This deformation of flat laminates into complex shapes can cause wrinkles in the final part. External processing conditions of forming process must be chosen in a way to …
Page 1 of 27