Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 74 for “"Autogenous shrinkage"”.
-
Autogenous shrinkage in cementitious systems
Autogenous shrinkage is of concern in high performance concrete mixtures, when specific properties like strength and durability are enhanced. Factors like low watercement ratio, low porosity and increased hydration kinetics which are associated with high performance concrete mixtures are also …
-
The effect of polycarboxylate admixtures on early-age autogenous shrinkage
Autogenous shrinkage tests were performed on cement paste mixtures containing varying dosages of different types of polycarboxylate-based high range water-reducing admixtures (HRWRA). The autogenous shrinkage testing was performed using corrugated tubes according to ASTM C1698 on three specimens at …
-
Assessing the autogenous shrinkage cracking propensity of concrete by means of the restrained ring test
The autogenous shrinkage due to self-desiccation of high- and ultra-high performance concretes with very low water-cement ratio in case of restraint leads to considerable stresses starting from very early age. The resultant risk of cracking presently cannot be adequately investigated. Parameters …
-
Mitigating autogenous shrinkage of Ultra-High Performance Concrete by means of internal curing using superabsorbent polymers
… is the most promising strategy for mitigating autogenous shrinkage and related early-age cracking in cement-based materials with low water-to-cement ratio. There are still many theoretical and practical questions that need to be answered before IC could become a standard method. Many of these …
-
Superabsorbent polymers and nanosilica for mitigation of autogenous shrinkage and promotion of self-healing of cementitious materials
… mixtures induces self-desiccation, leading to autogenous shrinkage. When this shrinkage is restrained, tensile stresses develop inside the material. As autogenous shrinkage occurs at early age and the tensile strength of concrete is relatively low, the risk of cracking is strongly increased …
-
Early age and time-dependent behaviour of ternary blends of high-performance concrete
… systematically vary w/b and binder composition. Autogenous shrinkage is measured immediately after casting using a new method developed for the study. Chloride penetration is studied using the Rapid Chloride Penetration Test. Results show that w/b and SCM selection jointly govern autogenous …
-
Avaliação da retração autógena de concretos de alto desempenho produzidos com cinza da casca de arroz
… the cement partial replacement level to reduce autogenous shrinkage are not well specified, and also if the different residual carbon contents present in the RHA can affect these results. In this study, a 65 MPacompressive strength concrete was produced aiming the study of autogenous shrinkage. …
-
Effect of pre-wetted perlite and fibers on autogenous and plastic shrinkage of high strength concrete
This thesis deals with the mitigation of plastic shrinkage in high strength concrete through internal curing and fiber reinforcement. In addition, the effects of mixture proportioning, internal curing and fiber reinforcement on elimination of autogenous shrinkage in mortar were studied. Internal …
-
Metakaolin-Portland limestone cements: Evaluating the effects of chemical admixtures on early and late age behavior
… (WRA) compatibility, and potential for increased shrinkage. To evaluate the combined use of metakaolin at higher replacement levels (> 10% by mass) with portland limestone cement (PLC) and their interaction with chemical admixtures, this investigation examines (1) early age hydration and …
-
Modelling early age cracking in blended cement concrete
… the research of time-dependent behaviour such as shrinkage and creep of blended cement concrete containing high volume of fly ash and GGBFS. To advance the understanding of volumetric changes in concrete mixes with high volume of fly ash and GGBFS, the presented research focused on five areas: (a) …
-
Time-dependent Deformation of Ultra-high Performance Concrete
… also impact time-dependent deformations such as shrinkage and creep. Time-dependent deformations can lead to development of cracks and loss of prestress, which can contribute to deflection of members and reduction in strength. Existing design models of shrinkage and creep are formulated and …
-
Early Volume Change of High Performance Concrete
… increase the risk of cracking due to thermal, autogenous, and drying shrinkage. Cracking is counter-productive to obtaining durability in the field. High performance concrete (HPC) can be durable in aggressive environments due to its superior mechanical, resistance to fluid transport, and …
-
Drinking Water Treatment Waste as an Alternative for Internal Curing and Cement Replacement in Concrete
… through several mechanisms broadly grouped into autogenous and drying shrinkage. These mechanisms cause cracks which become high permeability routes for water and aggressive ion movement, such as chlorides to reinforcing steel. Drying shrinkage can be controlled by appropriate curing methods, …
-
Enhancing Concrete Pavement Service Life Using Multiple Strategies to Reduce Cracking Potential
… can result in higher temperature rise and higher autogenous shrinkage, and ultimately higher cracking potential. This study investigated several strategies which could minimize these effects and subsequently lower the early-age cracking risks. Those cracking mitigating measures include …
-
Setting behavior and shrinkage of high performance pavement concrete: Effect of supplementary cementitious materials, chemical admixtures and temperature
… this thesis focuses on setting the behavior and shrinkage properties of high-performance pavement concrete and the effect factors, such as supplementary cementitious materials (SCMs), chemical admixtures, and temperature. The thesis consists of two papers: (1) the relation between setting …
-
Analysis of Autogenous and Drying Shrinkage of Concrete
… the concrete are referred to as chemical and autogenous shrinkage and drying and plastic shrinkage are due to water exchange with the surrounding environment. Shrinkage strains need to be investigated as they can have detrimental effects on the serviceability and durability of concrete.</p> …
-
Early age concrete thermal stress measurement and modeling
… of a concrete member, the temperature history, autogenous shrinkage, modulus development, tensile strength development, coefficient of thermal expansion development, creep behavior, and external restraint conditions must be known. A testing procedure has been developed to measure concrete heat …
-
Design and performance of cost-effective ultra high performance concrete for bridge deck overlays
… was examined. The efficiency of various shrinkage mitigation approaches in reducing autogenous and drying shrinkage of optimized UHPC mixtures was evaluated. This included the use of CaO-based and MgO-based expansive agents, shrinkage-reducing admixture, and pre-saturated lightweight …
-
Innovative superabsorbent polymers for crack mitigation of concrete structures : from laboratory to construction site
… to the material, as a consequence of the shrinkage that follows cement hydration and their growth can be enhanced by environmental factors. Through cracks, a preferential pathway is built for the ingress of a vast number of aggressive substances that in time become responsible for the most …
-
Evaluation of ASTM C 494 procedures for polycarboxylate admixtures used in precast concrete elements
… influences. The testing program focused on autogenous shrinkage through concrete restrained ring testing and paste analysis via the corrugated tube test. Tests were carried out by introducing different HRWR types and dosages, and quantifying their outlying observed strain effects with …
Page 1 of 4