Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 54 for “"Automatic Test Pattern Generation"”.

  1. Identification of redundant faults.

    … faults that are found not detectable by any test pattern in the process of automatic test pattern generation (ATPG) because they do not affect the normal circuit function. However, valuable time is wasted in ATPG algorithms due to the existence of redundant faults. The main purpose of ISB …

    ottawa-retro Repository record for Identification of redundant faults. (opens in a new tab)

  2. Built-In Self Test (BIST) for Realistic Delay Defects

    Testing of delay defects is necessary in deep submicron (DSM) technologies. High coverage delay tests produced by automatic test pattern generation (ATPG) can be applied during wafer and package tests, but are difficult to apply during the board test, due to limited chip access. Delay testing at …

    tamu Repository record for Built-In Self Test (BIST) for Realistic Delay Defects (opens in a new tab)

  3. Prevention of tri-state contention during scan using built-in constraint resolution

    … during scanning, nor as final values if random test patterns are scanned in. A new scan circuit construction obviates Automatic Test Pattern Generation (ATPG) constraints for the prevention of tristate contention on internal tristate buses and one-hot multiplexers. The circuit is supported by …

    texas Repository record for Prevention of tri-state contention during scan using built-in constraint resolution (opens in a new tab) Restricted access

  4. Methodologies to Exploit ATPG Tools for De-camouflaging

    … and by developing custom software to determine test patterns. These test patterns are used to analyze the outputs and to conclude the functionality of the camouflaged gate. In this thesis, we show that reverse engineering of camouflaged design can be performed by exploiting the test features of …

    usf Repository record for Methodologies to Exploit ATPG Tools for De-camouflaging (opens in a new tab)

  5. Estimating the expected latency to failure due to manufacturing defects

    Manufacturers of digital circuits test their products to find defective parts so they are not sold to customers. Despite extensive testing, some of their products that are defective pass the testing process. To combat this problem, manufacturers have developed a metric called defective part level. …

    tamu Repository record for Estimating the expected latency to failure due to manufacturing defects (opens in a new tab)

  6. Implicit cube-distance fault modeling for verification and functional testing applications

    … error modeling is also applied to functional testing of FPGAs, where the look-up table (LUT) based logic may contain an even larger variety of functional errors which the implicit cube error replacement modeling is used to check. Simulation techniques with random or upper-lattice layer vectors …

    concordia Download PDF for Implicit cube-distance fault modeling for verification and functional testing applications (opens in a new tab)

  7. COPING WITH DISCREPANCIES OF THE MANUFACTURED WEIGHTS IN THRESHOLD LOGIC GATES

    … model for weight defects is proposed. Also an Automatic Test Pattern Generation (ATPG) tool has been implemented that uses the fault model to detect whether the circuit is malfunctioning due to such weight-related defects. A novel design methodology is presented in this work to design complex …

    siu-theses Repository record for COPING WITH DISCREPANCIES OF THE MANUFACTURED WEIGHTS IN THRESHOLD LOGIC GATES (opens in a new tab)

  8. Improving Power, Performance and Area with Test: A Case Study

    … and area caused by full scan design-for-test should be considered as a way to help achieve these stricter requirements. This is especially important for designs that use near-threshold technology. In this work, we use partial scan to improve power, performance and area on a graphics …

    tamu Repository record for Improving Power, Performance and Area with Test: A Case Study (opens in a new tab)

  9. Testability analysis for mixed analog/digital circuit test generation and design for test

    … to mixed analog/digital circuit designers and test engineers. Specifically, monolithic mixed-signal ICs are often difficult to test (verify its full functionality) and can require a significant amount of time. Long test times and difficulty in developing test programs has been identified as a …

    washington Repository record for Testability analysis for mixed analog/digital circuit test generation and design for test (opens in a new tab)

  10. Fault-orientated testing of MOS circuits

    … accepted that the most efficient method of testing digital integrated circuits is to use a fault-orientated approach. Assumptions are made about the faults that can occur in a circuit, and the circuit is tested for the absence of these assumed faults. Over the last twenty years one set of …

    soton Download PDF for Fault-orientated testing of MOS circuits (opens in a new tab)

  11. Fault simulation and test generation for small delay faults

    Delay faults are an increasingly important test challenge. Traditional delay fault models are incomplete in that they model only a subset of delay defect behaviors. To solve this problem, a more realistic delay fault model has been developed which models delay faults caused by the combination of …

    tamu Repository record for Fault simulation and test generation for small delay faults (opens in a new tab)

  12. Embedded test strategies for system-on-a-chip designs

    … poses great challenges to the overall design and test methodologies. To support SoC design and test, it is important to develop a corresponding set of Semiconductor Infrastructure IP (SI²P), which includes all components surrounding an IP core to facilitate system integration, timing …

    ubc Repository record for Embedded test strategies for system-on-a-chip designs (opens in a new tab) Download PDF for Embedded test strategies for system-on-a-chip designs (opens in a new tab)

  13. MEASURING THE DELAY OF EMBEDDED SEGMENTS IN INTEGRATED CIRCUITS USING CURRENT SENSORS

    … years due to extensive device scaling, delay testing has become an issue of great concern. Delay diagnosis approaches have been proposed to measure delays of complete paths at observable points to provide an indication of the defective gates. Measurable segment delays would have resulted in …

    siu-theses Repository record for MEASURING THE DELAY OF EMBEDDED SEGMENTS IN INTEGRATED CIRCUITS USING CURRENT SENSORS (opens in a new tab)

  14. Testing tri-state and pass transistor circuit structures

    … are faster than AND/OR logic structures. But testing of tri-state structures has some issues associated with it. A stuck open control line of a tri-state gate will cause some lines in the circuit to float and take unknown values. A stuck-on control line can cause fighting when the two drivers …

    tamu Repository record for Testing tri-state and pass transistor circuit structures (opens in a new tab)

  15. Optimizing Test Pattern Generation Using Top-Off ATPG Methodology for Stuck–AT, Transition and Small Delay Defect Faults

    … pose challenges to the efficient Design For Test (DFT) methodologies. Innovation is required not only in designing the digital circuits, but also in automatic test pattern generation (ATPG) to ensure that the pattern set screens all the targeted faults while still complying with the Automatic …

    tamu Repository record for Optimizing Test Pattern Generation Using Top-Off ATPG Methodology for Stuck–AT, Transition and Small Delay Defect Faults (opens in a new tab)

  16. An intelligent function level backward state justification search for ATPG.

    … justification portion of the sequential circuit automatic test pattern generation (ATPG) process. Given the absence of a stored fault an ATPG controller invokes some combinational circuit test generation procedure, such as the D-algorithm, to identify a circuit state (goal state) and input …

    arizona-thes Repository record for An intelligent function level backward state justification search for ATPG. (opens in a new tab)

  17. Optimization of Pseudo Functional Path Delay Test Through Embedded Memories

    Traditional automatic test pattern generation achieves high coverage of logic faults in integrated circuits. Automatic test of embedded memory arrays uses built-in self-test. Testing the memories and logic separately does not fully test the critical timing paths that go into or out of memories. …

    tamu Repository record for Optimization of Pseudo Functional Path Delay Test Through Embedded Memories (opens in a new tab)

  18. Nouvelle technique de test de type délai plus robuste à la variation d'impédance du réseau de distribution d'alimentation

    De nos jours, le test de balayage à vitesse nominale (SBAST, Scan Based at-Speed Testing) est l’approche de test de type délai la plus dominante. Ce type de test vient avec certains inconvénients, comme le bruit de tension d’alimentation (PSN, Power Supply Noise) produit pendant le mode test, qui …

    ets-quebec Download PDF for Nouvelle technique de test de type délai plus robuste à la variation d'impédance du réseau de distribution d'alimentation (opens in a new tab)

  19. Techniques to Address Manufacturing Defects in Deep Sub-micron

    … an efficient and accurate method is essential to test and diagnose such defects in an Integrated Circuit (IC). It also helps with improving the IC design cycle for future products. However, various challenges are faced while developing a universal testing method for an IC.Chapter 2 addresses the …

    siu-theses Repository record for Techniques to Address Manufacturing Defects in Deep Sub-micron (opens in a new tab)

  20. SYNTHESIS AND TESTING OF THRESHOLD LOGIC CIRCUITS

    … This renewed the interest in synthesis and testing of circuits with threshold logic gates. Two important synthesis considerations of threshold logic circuits are addressed namely, threshold logic function identification and reducing the total number of threshold logic gates required to …

    siu-theses Repository record for SYNTHESIS AND TESTING OF THRESHOLD LOGIC CIRCUITS (opens in a new tab)

Page 1 of 3