Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 6 of 6 for “"Average pore radius"”.
-
Compressive Creep of Porous Gamma Phase Uranium Metal
… were performed to characterize the post-test pore size and distribution after deformation. The average pore radius was found to be 2.7 ± 0.6 micrometers. The experimental results and post-test analyses point to a compression mechanism consistent with diffusion assisted, dislocation motion …
-
Single and binary gas transport of H2, CO and CO2 through a NaA-centrifugally casted alumina composite membrane
… Knudsen diffusion, due to the relative small average pore radius of the support. The permeability of the NaA layer was higher than NaA membranes presented in the open literature, which were tested under similar conditions, which could also be attributed to the occurrence of intracrystalline …
-
Gas absorption on wood pulp cellulose
… solvent exchange dried. The presence of micropores (Dubinin definition) in solvent exchange dried cellulose has been shown. This finding was suggested by the results of Harris, who noted that adsorbents having an average pore radius of less than 18 Å indicated an average Kelvin pore radius of …
-
Characterizing the transport of hydrocarbon contaminants in peat soils and peatlands
… of the free-phase plume then partition into the pore water and the flowing aqueous phase forming a dissolved-phase plume. These plumes threaten peatland ecosystem health and impose risk to aquatic systems located nearby the contaminated area. For this reason, environmental scientists should be …
-
EFFECT OF THE PREPARATION OF THE CATALYST AND PROTECTIVE AGENT IN LIQUID PHASE HYDROGENATION REACTIONS
… carbon as the support. All catalysts had an average particle size of 3–4 nm, with the presence of isolated larger particles in the case of PdPDDA/C. The XPS survey data revealed that only Pd, C, N, and O species were present on the surface of the catalysts. Depending on the capping agent …