Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 30 for “"Axial Compressors"”.
-
Numerical investigation of rotating instabilities in axial compressors
In axial compressors with a relatively large blade tip clearance, an unsteady phenomenon denoted as rotating instability (RI) can be detected when the compressor is throttled to the operating points near the stability limit. In the frequency domain, RIs are shown as a hump lower than the blade …
-
The duct transmission of rotating acoustic modes in axial compressors
<p>The acoustic pressure field in a turbomachinery duct may be considered to consist of the superposition of pressure patterns which are rotating at different angular velocities. This type of sound wave is called "spinning mode." A distinctive property associated with the duct spinning modes which …
-
A Hybrid Vortex Solution for Radial Equilibrium in Axial Compressors
… equation for three dimensional design in axial compressors is generated. One of the most common used vortex solutions is Free Vortex. However, it ignores the fact that axial velocity varies with radius. The Hybrid Vortex includes axial velocity distribution with radius, which gives a more …
-
Modelling of losses in multi-stage axial compressors with subsonic conditions
… prediction code for subsonic multistage axial compressors that can be included in network analysis software. It was found that performance calculations based on an elementary one-dimensional meanline prediction method could achieve remarkable accuracy, provided that sound models are used …
-
A Hybrid Vortex Solution for Surge Margin Enhancement in Axial Compressors
… with a hub-to-tip ratio of 0.4 and non-axial inlet flow. This vortex solution is proposed to overcome the rapidly approaching asymptotic peak in compressor performance in the industry today. The Hybrid Vortex theory incorporates a versatile, higher-order solution to the SREE, resulting …
-
Aerodynamic design and characterization of novel wound composite multistage counter-rotating axial compressors
… WOUND COMPOSITE MULTISTAGE COUNTER-ROTATING AXIAL COMPRESSORSByBlake Ernest GowerThis thesis examines two different generations of axial compressor developed within the framework of the patented wound composite impeller technology created at Michigan State University. The technology itself …
-
Analysis of the sensitivity of multi-stage axial compressors to fouling at various stages
… coefficient, and efficiency of a three-stage axial compressor as a function of the location of fouling. First, an extensive review is presented on the state-of-the-art of measuring compressor degradation and on the impact of roughness on loss and deviation in a compressor cascade. The …
-
Pseudo Euler-Lagrange and Piecewise Affine Control Applied to Surge and Stall in Axial Compressors
This thesis addresses the control of the axial compressor surge and stall phenomena using Pseudo Euler-Lagrange and Piecewise Affine (PWA) controller synthesis techniques. These phenomena are considered as major gas turbine compressor instabilities that may result in failures such as the engine …
-
Characterizing the Role of Tip Leakage Flow in the Onset of Stall in Axial Compressors and Cavitation Inception in Ducted Propeller
… two specific phenomena – the onset of stall in axial compressors and cavitation inception in a ducted marine propeller, both of which are associated with the flow in the tip region of the machines. The experimental work utilizes performance measurements, cavitation visualization, phase-locked …
-
A Computer Program for the Coupled Implementation of Meanline and Throughflow Methods to Simplify the Aerodynamic Design of Multistage Axial Compressors
… aerodynamic design process of multistage axial compressors has been developed. This interactive design tool, named C-STAAC, combines the Meanline and Throughflow analysis capabilities of two independent compressor design codes to form one standalone system. The program greatly improves the …
-
Use of actuator disc model for modelling axial compressor dynamics
… herein, simplified ways of modelling the flow in axial compressors were investigated. In general full mathematical simulations of multi-stage axial compressors are not efficient in terms of calculation time and resources needed. Therefore to deal with such problems simplified models are used to …
-
The finite element method applied to flows in turbomachines.
… compressible radial equilibrium equation for axial compressors. Isoparametric elements are used along with three-point Gaussian integration for stiffness matrix evaluation. The radial equilibrium equation is put into quasi-harmonic form for stream function formulation and results are presented …
-
Compressor stability management
Dynamic compressors are susceptible to aerodynamic instabilities while operating at low mass flow rates. These instabilities, rotating stall and surge, are detrimental to engine life and operational safety, and are thus undesirable. In order to prevent stability problems, a passive technique, …
-
Design and Numerical Evaluation of a Counter- Rotating Compressor in the Absence of Boundary Layer Control: Part II
… a logical step in the development of multistage axial compressors. The promise of substantial reduction in the number of stages and associated collateral benefits cannot be ignored. Despite improved performance, early studies were halted due to issues arising from mechanical complexity. Recently …
-
Modular Multi-Stage Axial Compressor Design
… components, such as multi-stage axial compressors. It is the objective of this approach to utilize a "core" module in all the compressors, thus maximizing commonality and minimizing all relevant development, design, manufacture, procurement, and service costs; these reductions in …
-
Flow field surveys in a transonic compressor prior to inlet steam ingestion tests
… understanding of stall and surge in transonic axial compressors. Specifically, to understand the "pop stall" phenomenon experienced by naval fighter jet aircraft during steam catapult launches. Steam leakage from an aircraft carrier catapult system can be ingested into the intake and cause …
-
Physics based modeling of axial compressor stall
Axial compressors are used in a wide variety of aerodynamic applications and are one of the most important components in aero-engines. The operability of compressors is however limited at low-mass flow rates by fluid dynamic instabilities such as stall and surge. These instabilities can lead to …
-
Aeroelastic Investigation of a Circumferentially Varying Tip Gap in an Axial Compressor Rotor
The tip leakage flow in axial compressors is a significant factor in engine performance and a subject of investigation over the last several decades. Many studies have already shown that the vortices generated by this tip leakage can have a negative impact on the surrounding flow field and overall …
-
Numerical simulation and modeling of compressor stage instability of a rotating stall nature
… an unsteady flow phenomenon that appears in both axial and centrifugal compressors. It is detrimental to the performance of the compressor, significantly narrowing its operating range. Numerical simulation of this phenomenon has been a major area of investigation for axial compressors with some …
Page 1 of 2