Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 133 for “"Axially loaded"”.
-
PERFORMANCE OF REPAIRED AXIALLY LOADED MEMBERS
… of load transfer characteristics of repaired axially loaded members is highly complex. One reason is due to mismatch in the mechanical properties of the repair material and the parent concrete, another is, the effect of the existing load at the time of repair on load transfer characteristics. …
-
Axially loaded stainless steel compression members
In recent years, the engineering community has focused attention on selecting durable and low maintenance materials. As a result of recent advances in steel fabrication technologies, stainless steel has risen as a valuable alternative to regular carbon steel for heavy structural elements in …
-
Fatigue tests of axially loaded K-joints
… and results of testing large scale, tubular, axially loaded, simple K-joints to failure in fatigue. Each K-joint had a 2" diameter chord, a 18" diameter 3° branch and a 12 3/4" 9° branch. Measures were taken to ensure axial forces with little bending in both branches. This was accomplished …
-
On Path Independence of Axially Loaded Wire Rope Strands
… linearized load-strain expressions for an axially applied force and twisting moment do not satisfy exactly the requirement that, for an elastic system, the work of the applied loads be path independent. In the present study the constitutive load-deformation relationships used by Costello …
-
Static and Dynamic Analysis of Axially Loaded Wire Ropes
… investigate the static and dynamic behavior of axially loaded wire rope. The longitudinal, torsional, and transverse displacements are determined for a rope which is initially straight in the reference configuration and loaded by an axial force and twisting moment. The static response of wire …
-
Resistance analysis of axially loaded drilled shafts socketed in shale
… patented Osterberg-Cell™ loading technique to axially displace the shafts. Ensoft, Inc. installed strain gauges at multiple levels within the shafts, making it possible to analyze the shaft mobilization during loading. Ultimate end bearing values of about 100- and 120-ksf were measured for Test …
-
A contribution to the study of axially loaded pile foundations
<p>A study of some of the major parameters governing behaviour of pile foundations is described. The problems of: (a) the load-displacement characteristics of single piles (b) the load-displacement characteristics of free-standing pile groups with any arbitrary spacing, (c) the interaction between …
-
Laboratory load tests of side shear for axially loaded piles
Results from the laboratory testing program suggest that HPX-piles have approximately 10 percent greater side shear capacity than conventional HP-piles, on average. Unit side shear and the side shear parameter [beta] for both smooth and textured piles generally increased with increasing effective …
-
Buckling assessment of axially loaded cylindrical shells with random imperfections
<p>The buckling strength of axially loaded cylindrical shells is greatly affected by geometric imperfections. Due to the difference between test results and classical theory solution, current codes of practice require the application of knockdown factors to the classical buckling load. Another …
-
Delamination buckling, postbuckling, and growth in axially loaded beam-plates
… a simple one-dimensional model to analyze axially loaded beam-plates containing cracks which extend through the thickness of the beam-plates. Although the material analyzed is isotropic, these cracks will be referred to as delaminations. Buckling, postbuckling, and growth of delaminations …
-
Axially loaded members employing limit state design for statistically determinate truss
… criteria. The modes of failure investigated for axially loaded members include tension, compression, and buckling. The design code has the ability to optimize each truss member by minimization of member weight. Program stress and deflection analysis results are consistent with ANSYS®, a …
-
Graphical Comparison of Theoretical and Actual Settlement for Axially Loaded Piles
A primary purpose of this paper is to determine an adequate approach to the problem of axial load-settlement relationship. This paper will show that without the aid of a computer a load-settlement curve can be closely approximated. Graphical interpretation of settlement versus load has been very …
-
Internal Redundancy of Mechanically-Fastened Steel Built-Up Axially-Loaded Members
… if mechanically-fastened steel built-up axially-loaded tension members are resistant to complete cross-sectional fracture when a single component suddenly fractures and if so, to develop simplified methods of analysis for post-fracture load redistribution behavior for calculation of …
-
Bi-axially loaded slender reinforced concrete columns subjected to sustained loads
A generalized analytical approach is presented in this research to predict the behavior both of slender and short reinforced concrete columns under sustained biaxial eccentric load. The present analysis proposes equations established at a cross section of a reinforced concrete column by combining …
-
Experimental Testing of Axially Loaded Fuse Plates Without Continuous Buckling Restraint
Current seismic design practice is to design structures to avoid collapse and protect life. Buildings are designed to resist seismic loading through strength and ductility. In moment frames, this ductility traditionally comes from inelastic deformation of beams. Moment frame connections move …
-
Blast Resistant Design of Axially Loaded Columns Hinged at Both Ends
Made available in DSpace on 2014-12-05T17:36:55Z (GMT). No. of bitstreams: 1 0023315.pdf: 1744114 bytes, checksum: 3be145f85e36cfd0b38d05ab736064ef (MD5) Previous issue date: 1957
-
Axially Loaded Drilled Shafts: LRFD Resistance Factor Calibration and Predictive Techniques for Settlement
In areas where local geology consists of unique or uncommon subsurface materials, uncertainty in deep foundation design may lead to excessive construction costs and inadequate reliability. While the calibration of area-specific LRFD resistance factors for the strength limit state offers a potential …
Page 1 of 7